From d8cba9f05dce5fab72d3dcbcf0d1af6de97575ae Mon Sep 17 00:00:00 2001 From: Nils Gillmann Date: Fri, 8 Jun 2018 06:16:21 +0000 Subject: doc: create system specific folder and move files into it Signed-off-by: Nils Gillmann --- doc/system_specific/FROM_SOURCE | 1423 ++++++++++++++++++++ .../outdated-and-old-installation-instructions.txt | 672 +++++++++ 2 files changed, 2095 insertions(+) create mode 100644 doc/system_specific/FROM_SOURCE create mode 100644 doc/system_specific/outdated-and-old-installation-instructions.txt (limited to 'doc/system_specific') diff --git a/doc/system_specific/FROM_SOURCE b/doc/system_specific/FROM_SOURCE new file mode 100644 index 000000000..074b6a91e --- /dev/null +++ b/doc/system_specific/FROM_SOURCE @@ -0,0 +1,1423 @@ +@node Build instructions for Ubuntu 12.04 using Git +@section Build instructions for Ubuntu 12.04 using Git + +@menu +* Install the required build tools:: +* Install libgcrypt 1.6 and libgpg-error:: +* Install gnutls with DANE support:: +* Install libgnurl:: +* Install libmicrohttpd from Git:: +* Install libextractor from Git:: +* Install GNUnet dependencies:: +* Build GNUnet:: +* Install the GNUnet-gtk user interface from Git:: +@end menu + +@node Install the required build tools +@subsection Install the required build tools + +First, make sure Git is installed on your system: + +@example +$ sudo apt-get install git +@end example + +Install the essential buildtools: + +@example +$ sudo apt-get install automake autopoint autoconf libtool +@end example + +@node Install libgcrypt 1.6 and libgpg-error +@subsection Install libgcrypt 1.6 and libgpg-error + +@ref{generic source installation - libgpg-error} + +@node Install gnutls with DANE support +@subsection Install gnutls with DANE support + +@itemize @bullet +@item @ref{generic source installation - nettle} +@item @ref{generic source installation - ldns} +@item @ref{generic source installation - libunbound/unbound} +@item @ref{generic source installation - gnutls} +@item @ref{generic source installation - libgcrypt} +@end itemize + +@node Install libgnurl +@subsection Install libgnurl + +Follow the @ref{generic source installation - libgnurl}. + +@node Install libmicrohttpd from Git +@subsection Install libmicrohttpd from Git + +@example +$ git clone https://gnunet.org/git/libmicrohttpd +$ cd libmicrohttpd/ +$ ./bootstrap +$ ./configure +$ sudo make install ; cd .. +@end example + +@node Install libextractor from Git +@subsection Install libextractor from Git + +Install libextractor dependencies: + +@example +$ sudo apt-get install zlib1g-dev libgsf-1-dev libmpeg2-4-dev \ + libpoppler-dev libvorbis-dev libexiv2-dev libjpeg-dev \ + libtiff-dev libgif-dev libvorbis-dev libflac-dev libsmf-dev \ + g++ +@end example + +Build libextractor: + +@example +$ git clone https://gnunet.org/git/libextractor +$ cd libextractor +$ ./bootstrap +$ ./configure +$ sudo make install ; cd .. +@end example + +@node Install GNUnet dependencies +@subsection Install GNUnet dependencies + +@example +$ sudo apt-get install libidn11-dev libunistring-dev libglpk-dev \ + libpulse-dev libbluetooth-dev libsqlite-dev +@end example + +Install libopus: + +@example +$ wget http://downloads.xiph.org/releases/opus/opus-1.1.tar.gz +$ tar xf opus-1.1.tar.gz +$ cd opus-1.1/ +$ ./configure +$ sudo make install ; cd .. +@end example + +Choose one or more database backends: + +SQLite3: +@example +$ sudo apt-get install libsqlite3-dev +@end example +MySQL: +@example +$ sudo apt-get install libmysqlclient-dev +@end example +PostgreSQL: +@example +$ sudo apt-get install libpq-dev postgresql +@end example + + + +@node Build GNUnet +@subsection Build GNUnet + + + +@menu +* Configuring the installation path:: +* Configuring the system:: +* Installing components requiring sudo permission:: +* Build:: +@end menu + +@node Configuring the installation path +@subsubsection Configuring the installation path + +You can specify the location of the GNUnet installation by setting the +prefix when calling the configure script with @code{--prefix=DIRECTORY} + +@example +$ export PATH=$PATH:DIRECTORY/bin +@end example + +@node Configuring the system +@subsubsection Configuring the system + +Please make sure NOW that you have created a user and group 'gnunet' +and additionally a group 'gnunetdns': + +@example +$ sudo addgroup gnunet +$ sudo addgroup gnunetdns +$ sudo adduser gnunet +@end example + +Each GNUnet user should be added to the 'gnunet' group (may +require fresh login to come into effect): + +@example +$ sudo useradd -G gnunet +@end example + +@node Installing components requiring sudo permission +@subsubsection Installing components requiring sudo permission + +Some components, like the nss plugin required for GNS, may require root +permissions. To allow these few components to be installed use: + +@example +$ ./configure --with-sudo +@end example + +@node Build +@subsubsection Build + +@example +$ git clone https://gnunet.org/git/gnunet/ +$ cd gnunet/ +$ ./bootstrap +@end example + +Use the required configure call including the optional installation prefix +@code{PREFIX} or the sudo permissions: + +@example +$ ./configure [ --with-sudo | --with-prefix=PREFIX ] +@end example + +@example +$ make; sudo make install +@end example + +After installing it, you need to create an empty configuration file: + +@example +mkdir ~/.gnunet; touch ~/.gnunet/gnunet.conf +@end example + +And finally you can start GNUnet with: + +@example +$ gnunet-arm -s +@end example + +@node Install the GNUnet-gtk user interface from Git +@subsection Install the GNUnet-gtk user interface from Git + + +Install depencies: + +@example +$ sudo apt-get install libgtk-3-dev libunique-3.0-dev libgladeui-dev \ + libqrencode-dev +@end example + +Build GNUnet (with an optional prefix) and execute: + +@example +$ git clone https://gnunet.org/git/gnunet-gtk/ +$ cd gnunet-gtk/ +$ ./bootstrap +$ ./configure [--prefix=PREFIX] --with-gnunet=DIRECTORY +$ make; sudo make install +@end example + +@node Build Instructions for Microsoft Windows Platforms +@section Build Instructions for Microsoft Windows Platforms + +@menu +* Introduction to building on MS Windows:: +* Requirements:: +* Dependencies & Initial Setup:: +* GNUnet Installation:: +* Adjusting Windows for running and testing GNUnet:: +* Building the GNUnet Installer:: +* Using GNUnet with Netbeans on Windows:: +@end menu + +@node Introduction to building on MS Windows +@subsection Introduction to building on MS Windows + + +This document is a guide to building GNUnet and its dependencies on +Windows platforms. GNUnet development is mostly done under GNU/Linux and +especially git checkouts may not build out of the box. +We regret any inconvenience, and if you have problems, please report +them. + +@node Requirements +@subsection Requirements + +The Howto is based upon a @strong{Windows Server 2008 32bit} +@strong{Installation}, @strong{sbuild} and thus a +@uref{http://www.mingw.org/wiki/MSYS, MSYS+MinGW} +(W32-GCC-Compiler-Suite + Unix-like Userland) installation. sbuild +is a convenient set of scripts which creates a working msys/mingw +installation and installs most dependencies required for GNUnet. + +As of the point of the creation of these instructions, +GNUnet @strong{requires} a Windows @strong{Server} 2003 or +newer for full feature support. +Windows Vista and later will also work, but +@strong{non-server version can not run a VPN-Exit-Node} as the NAT +features have been removed as of Windows Vista. + +@c TODO: We should document Windows 10! +@c It seems like the situation hasn't changed with W10 + +@node Dependencies & Initial Setup +@subsection Dependencies & Initial Setup + + +@itemize @bullet + +@item +Install a fresh version of @strong{Python 2.x}, even if you are using a +x64-OS, install a 32-bit version for use with sbuild. +Python 3.0 is currently incompatible. + +@item +Install your favorite @uref{http://code.google.com/p/tortoisegit/, git} & +@uref{http://tortoisesvn.net/, subversion}-clients. + +@item +You will also need some archive-manager like +@uref{http://www.7-zip.org/, 7zip}. + +@item +Pull a copy of sbuild to a directory of your choice, which will be used +in the remainder of this guide. For now, we will use +@file{c:\gnunet\sbuild\} + +@item +in @file{sbuild\src\mingw\mingw32-buildall.sh}, comment out the packages +@strong{gnunet-svn} and @strong{gnunet-gtk-svn}, as we don't want sbuild +to compile/install those for us. + +@item +Follow LRN's sbuild installation instructions.- +@end itemize + +Please note that sbuild may (or will most likely) fail during +installation, thus you really HAVE to @strong{check the logfiles} created +during the installation process. +Certain packages may fail to build initially due to missing dependencies, +thus you may have to +@strong{substitute those with binary-versions initially}. Later on once +dependencies are satisfied you can re-build the newer package versions. + +@strong{It is normal that you may have to repeat this step multiple times +and there is no uniform way to fix all compile-time issues, as the +build-process of many of the dependencies installed are rather unstable +on win32 and certain releases may not even compile at all.} + +Most dependencies for GNUnet have been set up by sbuild, thus we now +should add the @file{bin/} directories in your new msys and mingw +installations to PATH. You will want to create a backup of your finished +msys-environment by now. + +@node GNUnet Installation +@subsection GNUnet Installation + +First, we need to launch our msys-shell, you can do this via + +@file{C:\gnunet\sbuild\msys\msys.bat} + +You might wish to take a look at this file and adjust some +login-parameters to your msys environment. + +Also, sbuild added two pointpoints to your msys-environment, though those +might remain invisible: + +@itemize @bullet + +@item +/mingw, which will mount your mingw-directory from sbuild/mingw and the +other one is + +@item +/src which contains all the installation sources sbuild just compiled. +@end itemize + +Check out the current GNUnet sources (git HEAD) from the +GNUnet repository "gnunet.git", we will do this in your home directory: + +@code{git clone https://gnunet.org/git/gnunet/ ~/gnunet} + +Now, we will first need to bootstrap the checked out installation and then +configure it accordingly. + +@example +cd ~/gnunet +./bootstrap +STRIP=true CPPFLAGS="-DUSE_IPV6=1 -DW32_VEH" CFLAGS="$CFLAGS -g -O2" \ +./configure --prefix=/ --docdir=/share/doc/gnunet \ +--with-libiconv-prefix=/mingw --with-libintl-prefix=/mingw \ +--with-libcurl=/mingw --with-extractor=/mingw --with-sqlite=/mingw \ +--with-microhttpd=/mingw --with-plibc=/mingw --enable-benchmarks \ +--enable-expensivetests --enable-experimental --with-qrencode=/mingw \ +--enable-silent-rules --enable-experimental 2>&1 | tee -a ./configure.log +@end example + +The parameters above will configure for a reasonable GNUnet installation +to the your msys-root directory. +Depending on which features your would like to build or you may need to +specify additional dependencies. Sbuild installed most libs into +the /mingw subdirectory, so remember to prefix library locations with +this path. + +Like on a unixoid system, you might want to use your home directory as +prefix for your own GNUnet installation for development, without tainting +the buildenvironment. Just change the "prefix" parameter to point towards +~/ in this case. + +Now it's time to compile GNUnet as usual. Though this will take some time, +so you may fetch yourself a coffee or some Mate now... + +@example +make ; make install +@end example + +@node Adjusting Windows for running and testing GNUnet +@subsection Adjusting Windows for running and testing GNUnet + +Assuming the build succeeded and you +@strong{added the bin directory of your GNUnet to PATH}, you can now use +your gnunet-installation as usual. +Remember that UAC or the windows firewall may popup initially, blocking +further execution of gnunet until you acknowledge them. + +You will also have to take the usual steps to get peer-to-peer (p2p) +software running properly (port forwarding, ...), +and GNUnet will require administrative permissions as it may even +install a device-driver (in case you are using gnunet-vpn and/or +gnunet-exit). + +@node Building the GNUnet Installer +@subsection Building the GNUnet Installer + +The GNUnet installer is made with +@uref{http://nsis.sourceforge.net/, NSIS}. +The installer script is located in @file{contrib\win} in the +GNUnet source tree. + +@node Using GNUnet with Netbeans on Windows +@subsection Using GNUnet with Netbeans on Windows + +TODO + +@node Build instructions for Debian 7.5 +@section Build instructions for Debian 7.5 + + +These are the installation instructions for Debian 7.5. They were tested +using a minimal, fresh Debian 7.5 AMD64 installation without non-free +software (no contrib or non-free). +By "minimal", we mean that during installation, we did not select any +desktop environment, servers or system utilities during the "tasksel" +step. Note that the packages and the dependencies that we will install +during this chapter take about 1.5 GB of disk space. +Combined with GNUnet and space for objects during compilation, you should +not even attempt this unless you have about 2.5 GB free after the minimal +Debian installation. +Using these instructions to build a VM image is likely to require a +minimum of 4-5 GB for the VM (as you will likely also want a desktop +manager). + +GNUnet's security model assumes that your @file{/home} directory is +encrypted. Thus, if possible, you should encrypt your home partition +(or per-user home directory). + +Naturally, the exact details of the starting state for your installation +should not matter much. For example, if you selected any of those +installation groups you might simply already have some of the necessary +packages installed. +We did this for testing, as this way we are less likely to forget to +mention a required package. +Note that we will not install a desktop environment, but of course you +will need to install one to use GNUnet's graphical user interfaces. +Thus, it is suggested that you simply install the desktop environment of +your choice before beginning with the instructions. + + + +@menu +* Update:: +* Stable? Hah!:: +* Update again:: +* Installing packages:: +* Installing dependencies from source:: +* Installing GNUnet from source:: +* But wait there is more!:: +@end menu + +@node Update +@subsection Update + +After any installation, you should begin by running + +@example +# apt-get update ; apt-get upgrade +@end example + +to ensure that all of your packages are up-to-date. Note that the "#" is +used to indicate that you need to type in this command as "root" +(or prefix with "sudo"), whereas "$" is used to indicate typing in a +command as a normal user. + +@node Stable? Hah! +@subsection Stable? Hah! + +Yes, we said we start with a Debian 7.5 "stable" system. However, to +reduce the amount of compilation by hand, we will begin by allowing the +installation of packages from the testing and unstable distributions as +well. +We will stick to "stable" packages where possible, but some packages will +be taken from the other distributions. +Start by modifying @file{/etc/apt/sources.list} to contain the +following (possibly adjusted to point to your mirror of choice): + +@example +# These were there before: +deb http://ftp.de.debian.org/debian/ wheezy main +deb-src http://ftp.de.debian.org/debian/ wheezy main +deb http://security.debian.org/ wheezy/updates main +deb-src http://security.debian.org/ wheezy/updates main +deb http://ftp.de.debian.org/debian/ wheezy-updates main +deb-src http://ftp.de.debian.org/debian/ wheezy-updates main + +# Add these lines (feel free to adjust the mirror): +deb http://ftp.de.debian.org/debian/ testing main +deb http://ftp.de.debian.org/debian/ unstable main +@end example + +The next step is to create/edit your @file{/etc/apt/preferences} +file to look like this: + +@example +Package: * +Pin: release a=stable,n=wheezy +Pin-Priority: 700 + +Package: * +Pin: release o=Debian,a=testing +Pin-Priority: 650 + +Package: * +Pin: release o=Debian,a=unstable +Pin-Priority: 600 +@end example + +You can read more about Apt Preferences here and here. +Note that other pinnings are likely to also work for GNUnet, the key +thing is that you need some packages from unstable (as shown below). +However, as unstable is unlikely to be comprehensive (missing packages) +or might be problematic (crashing packages), you probably want others +from stable and/or testing. + +@node Update again +@subsection Update again + +Now, run again@ + +@example +# apt-get update@ +# apt-get upgrade@ +@end example + +to ensure that all your new distribution indices are downloaded, and +that your pinning is correct: the upgrade step should cause no changes +at all. + +@node Installing packages +@subsection Installing packages + +We begin by installing a few Debian packages from stable:@ + +@example +# apt-get install gcc make python-zbar libltdl-dev libsqlite3-dev \ + libunistring-dev libopus-dev libpulse-dev openssl libglpk-dev \ + texlive libidn11-dev libmysqlclient-dev libpq-dev libarchive-dev \ + libbz2-dev libexiv2-dev libflac-dev libgif-dev libglib2.0-dev \ + libgtk-3-dev libmagic-dev libjpeg8-dev libmpeg2-4-dev libmp4v2-dev \ + librpm-dev libsmf-dev libtidy-dev libtiff5-dev libvorbis-dev \ + libogg-dev zlib1g-dev g++ gettext libgsf-1-dev libunbound-dev \ + libqrencode-dev libgladeui-dev nasm texlive-latex-extra \ + libunique-3.0-dev gawk miniupnpc libfuse-dev libbluetooth-dev +@end example + +After that, we install a few more packages from unstable:@ + +@example +# apt-get install -t unstable nettle-dev libgstreamer1.0-dev \ + gstreamer1.0-plugins-base gstreamer1.0-plugins-good \ + libgstreamer-plugins-base1.0-dev +@end example + +@node Installing dependencies from source +@subsection Installing dependencies from source + +Next, we need to install a few dependencies from source. +You might want to do this as a "normal" user and only run the +@code{make install} steps as root (hence the @code{sudo} in the +commands below). Also, you do this from any +directory. We begin by downloading all dependencies, then extracting the +sources, and finally compiling and installing the libraries. + +For these steps, follow the instructions given in the +installation from source instruction in this order: + +@itemize @bullet +@item @ref{generic source installation - libav} +@item @ref{generic source installation - libextractor} +@item @ref{generic source installation - libgpg-error} +@item @ref{generic source installation - libgcrypt} +@item @ref{generic source installation - gnutls} +@item @ref{generic source installation - libmicrohttpd} +@item @ref{generic source installation - libgnurl} +@end itemize + +@node Installing GNUnet from source +@subsection Installing GNUnet from source + + +For this, simply follow the generic installation instructions from +here. + +@node But wait there is more! +@subsection But wait there is more! + +So far, we installed all of the packages and dependencies required to +ensure that all of GNUnet would be built. +However, while for example the plugins to interact with the MySQL or +Postgres databases have been created, we did not actually install or +configure those databases. Thus, you will need to install +and configure those databases or stick with the default Sqlite database. +Sqlite is usually fine for most applications, but MySQL can offer better +performance and Postgres better resillience. + + +@node Installing GNUnet from Git on Ubuntu 14.4 +@section Installing GNUnet from Git on Ubuntu 14.4 + +@strong{Install the required build tools:} + +@example +$ sudo apt-get install git automake autopoint autoconf +@end example + +@strong{Install the required dependencies} + +@example +$ sudo apt-get install libltdl-dev libgpg-error-dev libidn11-dev \ + libunistring-dev libglpk-dev libbluetooth-dev libextractor-dev \ + libmicrohttpd-dev libgnutls28-dev +@end example + +@strong{Choose one or more database backends} + +@itemize @bullet + +@item SQLite3: + +@example +$ sudo apt-get install libsqlite3-dev +@end example + +@item MySQL: + +@example +$ sudo apt-get install libmysqlclient-dev +@end example + +@item PostgreSQL: + +@example +$ sudo apt-get install libpq-dev postgresql +@end example + +@end itemize + +@strong{Install the optional dependencies for gnunet-conversation:} + +@example +$ sudo apt-get install gstreamer1.0 libpulse-dev libopus-dev +@end example + +@strong{Install the libgrypt 1.6.1:} + +@itemize @bullet + +@item For Ubuntu 14.04: + +@example +$ sudo apt-get install libgcrypt20-dev +@end example + +@item For Ubuntu older 14.04: + +@example +$ wget ftp://ftp.gnupg.org/gcrypt/libgcrypt/libgcrypt-1.6.1.tar.bz2 +$ tar xf libgcrypt-1.6.1.tar.bz2 +$ cd libgcrypt-1.6.1 +$ ./configure +$ sudo make install +$ cd .. +@end example + +@end itemize + +@strong{Install libgnurl} + +@strong{Install GNUnet} + +@example +$ git clone https://gnunet.org/git/gnunet/ +$ cd gnunet/ +$ ./bootstrap +@end example + +If you want to: + +@itemize @bullet + +@item Install to a different directory: + +@example +--prefix=PREFIX +@end example + +@item +Have sudo permission, but do not want to compile as root: + +@example +--with-sudo +@end example + +@item +Want debug message enabled: + +@example +--enable-logging=verbose +@end example + +@end itemize + + +@example +$ ./configure [ --with-sudo | --prefix=PREFIX | --enable-logging=verbose] +$ make; sudo make install +@end example + +After installing it, you need to create an empty configuration file: + +@example +touch ~/.config/gnunet.conf +@end example + +And finally you can start GNUnet with + +@example +$ gnunet-arm -s +@end example + +@node Build instructions for Debian 8 +@section Build instructions for Debian 8 +@c FIXME: I -> we + +These are the installation instructions for Debian 8. They were tested +sing a fresh Debian 8 AMD64 installation without non-free software (no +contrib or non-free). During installation, I only selected "lxde" for the +desktop environment. +Note that the packages and the dependencies that we will install during +this chapter take about 1.5 GB of disk space. Combined with GNUnet and +space for objects during compilation, you should not even attempt this +unless you have about 2.5 GB free after the Debian installation. +Using these instructions to build a VM image is likely to require a +minimum of 4-5 GB for the VM (as you will likely also want a desktop +manager). + +GNUnet's security model assumes that your @code{/home} directory is +encrypted. +Thus, if possible, you should encrypt your entire disk, or at least just +your home partition (or per-user home directory). + +Naturally, the exact details of the starting state for your installation +should not matter much. +For example, if you selected any of those installation groups you might +simply already have some of the necessary packages installed. Thus, it is +suggested that you simply install the desktop environment of your choice +before beginning with the instructions. + + +@menu +* Update Debian:: +* Installing Debian Packages:: +* Installing Dependencies from Source2:: +* Installing GNUnet from Source2:: +* But wait (again) there is more!:: +@end menu + +@node Update Debian +@subsection Update Debian + +After any installation, you should begin by running + +@example +# apt-get update +# apt-get upgrade +@end example + +to ensure that all of your packages are up-to-date. Note that the "#" is +used to indicate that you need to type in this command as "root" (or +prefix with "sudo"), whereas "$" is used to indicate typing in a command +as a normal user. + +@node Installing Debian Packages +@subsection Installing Debian Packages + +We begin by installing a few Debian packages from stable: + +@example +# apt-get install gcc make python-zbar libltdl-dev libsqlite3-dev \ +libunistring-dev libopus-dev libpulse-dev openssl libglpk-dev texlive \ +libidn11-dev libmysqlclient-dev libpq-dev libarchive-dev libbz2-dev \ +libflac-dev libgif-dev libglib2.0-dev libgtk-3-dev libmpeg2-4-dev \ +libtidy-dev libvorbis-dev libogg-dev zlib1g-dev g++ gettext \ +libgsf-1-dev libunbound-dev libqrencode-dev libgladeui-dev nasm \ +texlive-latex-extra libunique-3.0-dev gawk miniupnpc libfuse-dev \ +libbluetooth-dev gstreamer1.0-plugins-base gstreamer1.0-plugins-good \ +libgstreamer-plugins-base1.0-dev nettle-dev libextractor-dev \ +libgcrypt20-dev libmicrohttpd-dev +@end example + +@node Installing Dependencies from Source2 +@subsection Installing Dependencies from Source2 + +Yes, we said we start with a Debian 8 "stable" system, but because Debian +linked GnuTLS without support for DANE, we need to compile a few things, +in addition to GNUnet, still by hand. Yes, you can run GNUnet using the +respective Debian packages, but then you will not get DANE support. + +Next, we need to install a few dependencies from source. You might want +to do this as a "normal" user and only run the @code{make install} steps +as root (hence the @code{sudo} in the commands below). Also, you do this +from any directory. We begin by downloading all dependencies, then +extracting the sources, and finally compiling and installing the +libraries: + +@example +$ wget ftp://ftp.gnutls.org/gcrypt/gnutls/v3.3/gnutls-3.3.12.tar.xz +$ tar xvf gnutls-3.3.12.tar.xz +$ cd gnutls-3.3.12 ; ./configure ; make ; sudo make install ; cd .. +@end example + +For the installation and compilation of libgnurl/gnURL refer to +the generic installation section, +@xref{generic source installation - libgnurl}. + +@node Installing GNUnet from Source2 +@subsection Installing GNUnet from Source2 + +For this, simply follow the generic installation instructions from@ +here. + +@node But wait (again) there is more! +@subsection But wait (again) there is more! + +So far, we installed all of the packages and dependencies required to +ensure that all of GNUnet would be built. However, while for example the +plugins to interact with the MySQL or Postgres databases have been +created, we did not actually install or configure those databases. +Thus, you will need to install and configure those databases or stick +with the default Sqlite database. Sqlite is usually fine for most +applications, but MySQL can offer better performance and Postgres better +resillience. + +@node Build instructions for macOS +@section Build instructions for macOS +@c FIXME: I -> we + +These are the installation guidelines for macOS. +They were tested on macOS High Sierra. + +@menu +* Installing dependencies:: +* Compile from Source:: +@end menu + +@node Installing dependencies +@subsection Installing dependencies + +First, install XCode in the newest version. +See https://developer.apple.com/xcode/. + +Install Homebrew (https://brew.sh) and then install the dependencies listed above. +If a dependency does not exists in brew, you need to compile it from source. + +@example +# brew install +@end example + +@node Compile from Source +@subsection Compile from Source + +Before you start building GNUnet, you need to setup your environment. +This means that you have to make sure the proper tools are used in the build process. +For example, after installing texinfo you need to make sure the new texinfo is actually used: + +@example +# echo 'export PATH="/usr/local/opt/texinfo/bin:$PATH"' >> ~/.bash_profile +@end example + +Note: brew tells you the appropriate command when executing + +@example +# brew info texinfo +@end example + +This may also be necessary for the gettext package. + +Before you start compiling, you need to make sure gcc is used and not the clang compile of your macOS system. +On my system, gcc was actually ``gcc-7'' and gcc pointed to the clang compiler. + +@example +# export CC=gcc-7 +@end example + +After this the standard compile instructions apply. + +@c @node Build instructions for OpenBSD 6.2 +@c @section Build instructions for OpenBSD 6.2 + +@node Outdated build instructions for previous revisions +@section Outdated build instructions for previous revisions + +This chapter contains a collection of outdated, older installation guides. +They are mostly intended to serve as a starting point for writing +up-to-date instructions and should not be expected to work for +GNUnet 0.10.x. +A set of older installation instructions can also be found in the +file @file{doc/outdated-and-old-installation-instructions.txt} in the +source tree of GNUnet. + +This file covers old instructions which no longer receive security +updates or any kind of support. + +@menu +* Installing GNUnet 0.10.1 on Ubuntu 14.04:: +* Building GLPK for MinGW:: +* GUI build instructions for Ubuntu 12.04 using Subversion:: +@c * Installation with gnunet-update:: +* Instructions for Microsoft Windows Platforms (Old):: +@end menu + + +@node Installing GNUnet 0.10.1 on Ubuntu 14.04 +@subsection Installing GNUnet 0.10.1 on Ubuntu 14.04 + +Install the required dependencies: + +@example +$ sudo apt-get install libltdl-dev libgpg-error-dev libidn11-dev \ + libunistring-dev libglpk-dev libbluetooth-dev libextractor-dev \ + libmicrohttpd-dev libgnutls28-dev +@end example + +Choose one or more database backends: + +@itemize @bullet + +@item SQLite3 + +@example + $ sudo apt-get install libsqlite3-dev@ +@end example + +@item MySQL + +@example +$ sudo apt-get install libmysqlclient-dev@ +@end example + +@item PostgreSQL + +@example + $ sudo apt-get install libpq-dev postgresql@ +@end example + +@end itemize + +Install the optional dependencies for gnunet-conversation: + +@example + $ sudo apt-get install gstreamer1.0 libpulse-dev libopus-dev +@end example + +Install libgcrypt 1.6: + +@itemize @bullet + +@item For Ubuntu 14.04: + +@example +$ sudo apt-get install libgcrypt20-dev +@end example + +@item For Ubuntu older than 14.04: + +@example +wget ftp://ftp.gnupg.org/gcrypt/libgcrypt/libgcrypt-1.6.1.tar.bz2 +$ tar xf libgcrypt-1.6.1.tar.bz2 +$ cd libgcrypt-1.6.1 +$ ./configure +$ sudo make install +$ cd .. +@end example +@end itemize + +Install libgnurl: + +@pxref{generic source installation - libgnurl}. + +Install GNUnet: + +@example +$ wget http://ftpmirror.gnu.org/gnunet/gnunet-0.10.1.tar.gz +$ tar xf gnunet-0.10.1.tar.gz +$ cd gnunet-0.10.1 +@end example + +If you want to: + +@itemize @bullet + +@item +Install to a different directory: + +@example +--prefix=PREFIX +@end example + +@item +Have sudo permission, but do not want to compile as root: + +@example +--with-sudo +@end example + +@item +Want debug message enabled: + +@example +--enable-logging=verbose +@end example + +@end itemize + +@example +$ ./configure [ --with-sudo | --prefix=PREFIX | --enable-logging=verbose] +$ make; sudo make install +@end example + +After installing it, you need to create an empty configuration file: + +@example +touch ~/.config/gnunet.conf +@end example + +And finally you can start GNUnet with + +@example +$ gnunet-arm -s +@end example + +@node Building GLPK for MinGW +@subsection Building GLPK for MinGW + +GNUnet now requires the GNU Linear Programming Kit (GLPK). +Since there's is no package you can install with @code{mingw-get} you +have to compile it from source: + +@itemize @bullet + +@item Download the latest version from +@uref{http://ftp.gnu.org/gnu/glpk/} + +@item Unzip the downloaded source tarball using your favourite +unzipper application In the MSYS shell + +@item change to the respective directory + +@item Configure glpk for "i686-pc-mingw32": + +@example +./configure '--build=i686-pc-mingw32' +@end example + +@item run + +@example +make install check +@end example + +@end itemize + +MinGW does not automatically detect the correct buildtype so you have to +specify it manually. + + +@node GUI build instructions for Ubuntu 12.04 using Subversion +@subsection GUI build instructions for Ubuntu 12.04 using Subversion + +After installing GNUnet you can continue installing the GNUnet GUI tools: + +First, install the required dependencies: + +@example +$ sudo apt-get install libgladeui-dev libqrencode-dev +@end example + +Please ensure that the GNUnet shared libraries can be found by the linker. +If you installed GNUnet libraries in a non standard path +(say GNUNET_PREFIX=/usr/local/lib/), you can + +@itemize @bullet + +@item set the environmental variable permanently to: + +@example +LD_LIBRARY_PATH=$GNUNET_PREFIX +@end example + +@item or add @code{$GNUNET_PREFIX} to @file{/etc/ld.so.conf} + +@end itemize + +Now you can checkout and compile the GNUnet GUI tools: + +@example +$ git clone https://gnunet.org/git/gnunet-gtk +$ cd gnunet-gtk +$ ./bootstrap +$ ./configure --prefix=$GNUNET_PREFIX/.. --with-gnunet=$GNUNET_PREFIX/.. +$ make install +@end example + +@node Instructions for Microsoft Windows Platforms (Old) +@subsection Instructions for Microsoft Windows Platforms (Old) + +This document is a @b{DEPRECATED} installation guide for GNUnet on +Windows. +It will not work for recent GNUnet versions, but maybe it will be of +some use if problems arise. + +The Windows build uses a UNIX emulator for Windows, +@uref{http://www.mingw.org/, MinGW}, to build the executable modules. +These modules run natively on Windows and do not require additional +emulation software besides the usual dependencies. + +GNUnet development is mostly done under GNU/Linux and especially git +checkouts may not build out of the box. +We regret any inconvenience, and if you have problems, please report them. + +@menu +* Hardware and OS requirements:: +* Software installation:: +* Building libextractor and GNUnet:: +* Installer:: +* Source:: +@end menu + +@node Hardware and OS requirements +@subsubsection Hardware and OS requirements + +@itemize @bullet +@item Pentium II or equivalent processor, @geq{} 350 MHz +@item 128 MB RAM +@item 600 MB free disk space +@item Windows 2000 or Windows XP are recommended +@end itemize + +@node Software installation +@subsubsection Software installation + +@itemize @bullet + +@item +@strong{Compression software}@ + +The software packages GNUnet depends on are usually compressed using UNIX +tools like @command{tar}, @command{gzip}, @command{xzip} and +@command{bzip2}. +If you do not already have an utility that is able to extract such +archives, get @uref{http://www.7-zip.org/, 7-Zip}. + +@item +@strong{UNIX environment}@ + +The MinGW project provides the compiler toolchain that is used to build +GNUnet. +Get the following packages from the +@uref{http://sourceforge.net/projects/mingw/files/, MinGW} project: + +@itemize @bullet + +@item GCC core +@item GCC g++ +@item MSYS +@item MSYS Developer Tool Kit (msysDTK) +@item MSYS Developer Tool Kit - msys-autoconf (bin) +@item MSYS Developer Tool Kit - msys-automake (bin) +@item MinGW Runtime +@item MinGW Utilities +@item Windows API +@item Binutils +@item make +@item pdcurses +@item GDB (snapshot) +@end itemize + +@itemize @bullet + + +@item Install MSYS (to c:\mingw, for example.)@ +Do @strong{not} use spaces in the pathname. +For example, avoid a location such as @file{c:\program files\mingw}. + +@item Install MinGW runtime, utilities and GCC to a subdirectory +(to @file{c:\mingw\mingw}, for example) + +@item Install the Development Kit to the MSYS directory +(@file{c:\mingw}) + +@item Create a batch file bash.bat in your MSYS directory with +the files: + +@example +bin\sh.exe --login +@end example + +This batch file opens a shell which is used to invoke the build +processes. +MinGW's standard shell (@command{msys.bat}) is not suitable +because it opens a separate console window. +On Vista, @command{bash.bat} needs to be run as Administrator. + +@item +Start @command{bash.sh} and rename +@file{c:\mingw\mingw\lib\libstdc++.la} to avoid problems: + +@example +mv /usr/mingw/lib/libstdc++.la /usr/mingw/lib/libstdc++.la.broken +@end example + +@item +Unpack the Windows API to the MinGW directory (@file{c:\mingw\mingw\}) and +remove the declaration of DATADIR from +(@file{c:\mingw\mingw\include\objidl.h} (lines 55-58) + +@item +Unpack autoconf, automake to the MSYS directory (@file{c:\mingw}) + +@item +Install all other packages to the MinGW directory (@file{c:\mingw\mingw\}) +@end itemize + + +@item @strong{GNU Libtool}@ +GNU Libtool is required to use shared libraries. +Get the prebuilt package from here and unpack it to the +MinGW directory (@file{c:\mingw}) + +@item @strong{Pthreads}@ +GNUnet uses the portable POSIX thread library for multi-threading: + +@itemize @bullet + +@item Save +@uref{ftp://sources.redhat.com/pub/pthreads-win32/dll-latest/lib/x86/libpthreadGC2.a, libpthreadGC2.a} +(x86) or +@uref{ftp://sources.redhat.com/pub/pthreads-win32/dll-latest/lib/x64/libpthreadGC2.a, libpthreadGC2.a} +(x64) as libpthread.a into the @file{lib} +directory (@file{c:\mingw\mingw\lib\libpthread.a}). + +@item Save +@uref{ftp://sources.redhat.com/pub/pthreads-win32/dll-latest/lib/x86/pthreadGC2.dll, pthreadGC2.dll} +(x86) or +@uref{ftp://sources.redhat.com/pub/pthreads-win32/dll-latest/lib/x64/pthreadGC2.dll, libpthreadGC2.a} +(x64) into the MinGW @file{bin} directory (@file{c:\mingw\mingw\bin}). + +@item Download all header files from +@uref{ftp://sources.redhat.com/pub/pthreads-win32/dll-latest/include/, include/} +to the @file{include} directory (@file{c:\mingw\mingw\include}). +@end itemize + + +@item @strong{GNU MP}@ +GNUnet uses the GNU Multiple Precision library for special cryptographic +operations. Get the GMP binary package from the +@uref{http://sourceforge.net/projects/mingwrep/, MinGW repository} and +unpack it to the MinGW directory (@file{c:\mingw\mingw}) + +@item @strong{GNU Gettext}@ +GNU gettext is used to provide national language support. +Get the prebuilt package from hereand unpack it to the MinGW +directory (@file{c:\mingw\mingw}) + +@item @strong{GNU iconv}@ +GNU Libiconv is used for character encoding conversion. +Get the prebuilt package from here and unpack it to the MinGW +directory (@file{c:\mingw\mingw}). + +@item @strong{SQLite}@ +GNUnet uses the SQLite database to store data. +Get the prebuilt binary from here and unpack it to your MinGW directory. + +@item @strong{MySQL}@ +As an alternative to SQLite, GNUnet also supports MySQL. + +@itemize @bullet + +@item Get the binary installer from the +@uref{http://dev.mysql.com/downloads/mysql/4.1.html#Windows, MySQL project} +(version 4.1), install it and follow the instructions in +@file{README.mysql}. + +@item Create a temporary build directory (@file{c:\mysql}) + +@item Copy the directories @file{include\} and @file{lib\} from the +MySQL directory to the new directory + +@item Get the patches from +@uref{http://bugs.mysql.com/bug.php?id=8906&files=1, Bug #8906} and +@uref{http://bugs.mysql.com/bug.php?id=8872&files=1, Bug #8872} (the +latter is only required for MySQL + +@example +patch -p 0 +@end example + +@item Move @file{lib\opt\libmysql.dll} to @file{lib\libmysql.dll} + +@item Change to @file{lib\} and create an import library: + +@example +dlltool --input-def ../include/libmySQL.def \ +--dllname libmysql.dll \ +--output-lib libmysqlclient.a -k +@end example + +@item Copy include\* to include\mysql\ + +@item Pass @code{--with-mysql=/c/mysql} to +@command{./configure} and copy @file{libmysql.dll} +to your PATH or GNUnet's @file{bin} directory +@end itemize + + +@item @strong{GTK+}@ +@command{gnunet-fs-gtk} and @command{libextractor} depend on GTK. +Get the the binary and developer packages of @command{atk}, +@command{glib}, @command{gtk}, @command{iconv}, +@command{gettext-runtime}, @command{pango} from +@uref{ftp://ftp.gtk.org/pub/gtk/v2.6/win32, gtk.org} and unpack them +to the MinGW directory (@file{c:\mingw\mingw}). +@c FIXME: The URL below for pkg-config seems wrong. +Get @uref{http://www.gtk.org/download/win32.php, pkg-config} and +@command{libpng} and unpack them to the MinGW directory +(@file{c:\mingw\mingw}). +Here is an all-in-one package for the +@uref{http://ftp.gnome.org/pub/gnome/binaries/win32/gtk+/2.24/gtk+-bundle_2.24.10-20120208_win32.zip, gtk+dependencies} +. Do not overwrite any existing files! + +@item @strong{Glade}@ +@command{gnunet-*-gtk} and @command{gnunet-setup} were created using +this interface builder + +@itemize @bullet + +@item Get the Glade and libglade (-bin and -devel) packages +(without GTK!) from +@uref{http://gladewin32.sourceforge.net/, GladeWin32} and unpack them to +the MinGW directory (@file{c:\mingw\mingw}). + +@item Get @command{libxml} from here and unpack it to the MinGW +directory (@file{c:\mingw\mingw}). +@end itemize + +@c FIXME: URLs +@item @strong{zLib}@ +@command{libextractor} requires @command{zLib} to decompress some file +formats. GNUnet uses it to (de)compress meta-data. +Get zLib from here (Signature) and unpack it to the MinGW directory +(@file{c:\mingw\mingw}). + +@item @strong{Bzip2}@ +@command{libextractor} also requires @command{Bzip2} to +decompress some file formats. +Get the Bzip2 (binary and developer package) from +@uref{http://gnuwin32.sourceforge.net/packages/bzip2.htm, GnuWin32} and +unpack it to the MinGW directory (@file{c:\mingw\mingw}). + +@item @strong{Libgcrypt}@ +@command{Libgcrypt} provides the cryptographic functions used by GNUnet. +Get Libgcrypt from @uref{ftp://ftp.gnupg.org/gcrypt/libgcrypt/, here}, +compile and place it in the MinGW directory +(@file{c:\mingw\mingw}). Currently libgcrypt @geq{} 1.4.2 is required to +compile GNUnet. + +@item @strong{PlibC}@ +PlibC emulates Unix functions under Windows. Get PlibC from here and +unpack it to the MinGW directory (c:\mingw\mingw) + +@item @strong{OGG Vorbis}@ +@command{OGG Vorbis} is used to extract meta-data from @file{.ogg} files. +Get the packages +@uref{http://www.gnunet.org/libextractor/download/win/libogg-1.1.4.zip, libogg} +and +@uref{http://www.gnunet.org/libextractor/download/win/libvorbis-1.2.3.zip, libvorbis} +from the +@uref{http://ftp.gnu.org/gnu/libextractor/libextractor-w32-1.0.0.zip, libextractor win32 build} +and unpack them to the MinGW directory (c:\mingw\mingw). + +@item @strong{Exiv2}@ +(lib)Exiv2 is used to extract meta-data from files with Exiv2 meta-data. +Download +@uref{http://www.gnunet.org/libextractor/download/win/exiv2-0.18.2.zip, Exiv2} +and unpack it to the MSYS directory (c:\mingw). +@end itemize + +@node Building libextractor and GNUnet +@subsubsection Building libextractor and GNUnet + +Before you compile @command{libextractor} or @command{GNUnet}, +be sure to set @code{PKG_CONFIG_PATH}: + +@example +export PKG_CONFIG_PATH=/mingw/lib/pkgconfig +@end example + +@noindent +@xref{GNUnet Installation Handbook}, for basic instructions on building +@command{libextractor} and @command{GNUnet}. +By default, all modules that are created in this way contain +debug information and are quite large. To compile release versions +(small and fast) set the variable @code{CFLAGS}: + +@example +export CFLAGS='-O2 -march=pentium -fomit-frame-pointer' +./configure --prefix=$HOME --with-extractor=$HOME +@end example + +@node Installer +@subsubsection Installer + +The GNUnet installer is made with +@uref{http://nsis.sourceforge.net/, NSIS}. The installer script is +located in @file{contrib\win} in the GNUnet source tree. + +@node Source +@subsubsection Source + +@c FIXME: URL... or: WHERE is HERE? +The sources of all dependencies are available here. diff --git a/doc/system_specific/outdated-and-old-installation-instructions.txt b/doc/system_specific/outdated-and-old-installation-instructions.txt new file mode 100644 index 000000000..f2cbe1847 --- /dev/null +++ b/doc/system_specific/outdated-and-old-installation-instructions.txt @@ -0,0 +1,672 @@ +# This file contains pieces from chapter/installation.texi for systems where the LTS or otherwise support +# ended. They can be useful for people trying to write new installation instructions for those systems. +# In particual this covers: +# - FreeBSD 8 +# - Mac OS X Tiger +# - Fedora 8 +# - Gentoo with GNUnet 0.9 +# +# Sources for LTS and support ranges: +# https://www.freebsd.org/security/security.html#sup +# https://support.microsoft.com/en-us/help/17140/lifecycle-faq-general-policy-questions +# Mac products, OS is supposedly similar (no official statements exist): https://web.archive.org/web/20160706101225/https://support.apple.com/en-us/HT201624 +# https://wiki.debian.org/LTS +# https://www.ubuntu.com/info/release-end-of-life + +@node Build instructions for Gentoo +@subsection Build instructions for Gentoo + + +This page describes how to install GNUnet 0.9 on Gentoo. + +Since the GNUnet 0.9 ebuilds are not in the official portage tree yet, we need +to add them to the local portage overlay. All the commands below should be +executed as root. + +Specify your local portage directory in the /etc/make.conf, for example:@ +@code{$ echo 'PORTDIR_OVERLAY="/usr/local/portage"' >> /etc/make.conf} + +Create directories for the ebuilds:@ +@code{$ mkdir -p /usr/local/portage/media-libs/libextractor /usr/local/portage/net-p2p/gnunet/files} + +Download the latest ebuilds, init and config files from here and put them into +respective directories:@ +@code{$ cp libextractor-0.6.2.ebuild /usr/local/portage/media-libs/libextractor@ + $ cp gnunet-0.9.2.ebuild /usr/local/portage/net-p2p/gnunet@ + $ cp gnunet-0.9.2.conf gnunet-0.9.2.confd gnunet-0.9.2.initd /usr/local/portage/net-p2p/gnunet/files} + +Generate Manifest files for the ebuilds:@ +@code{$ cd /usr/local/portage/net-p2p/gnunet@ + $ ebuild gnunet-0.9.2.ebuild digest@ + $ cd /usr/local/portage/media-libs/libextractor@ + $ ebuild libextractor-0.6.2.ebuild digest} + +Unmask GNUnet and dependencies in the /etc/portage/package.keywords. For +example, if you use x86-64 architecture, add the following lines:@ +@code{net-p2p/gnunet ~amd64@ + media-libs/libextractor ~amd64@ + net-libs/libmicrohttpd ~amd64@ + net-misc/curl ~amd64} + +Add either sqlite or mysql USE-flag in the /etc/portage/package.use:@ +@code{net-p2p/gnunet sqlite} + +Now everything is ready to install GNUnet:@ +@code{$ emerge -av gnunet} + +Use /etc/init.d/gnunet to start/stop GNUnet. + + + + +@node Basic Installation for Fedora/PlanetLab nodes running Fedora 8 . +@subsection Basic Installation for Fedora/PlanetLab nodes running Fedora 8 . +@c %**end of header + +@strong{This documentation is outdated and not valid for GNUnet 0.10.0!}@ + GNUnet installation on Fedora 8/Planetlab nodes can be done as following: + +1. Install the build tools to build GNUnet@ +@example +sudo yum -y -t --nogpgcheck install gcc make automake autoconf gettext-devel \ +texinfo zlib-devel subversion@ +@end example + +2. Install the GNUnet dependencies@ +@example +sudo yum -y -t --nogpgcheck install gnutls-devel gnutls-devel libgcrypt-devel \ +sqlite-devel postgresql-devel mysql-devel libgsf-devel libvorbis-devel \ +libidn-devel +@end example + +3. Install outdated dependencies from source@ + libtool@ +@code{@ + wget http://ftp.gnu.org/gnu/libtool/libtool-2.4.2.tar.gz@ + tar xvfz libtool-2.4.2.tar.gz@ + cd libtool-2.4.2@ + ./configure@ + sudo make install@ +} + +libtool@ +@code{@ + wget http://ftp.gnu.org/gnu/libtool/libtool-2.4.2.tar.gz@ + tar xvfz libtool-2.4.2.tar.gz@ + cd libtool-2.4.2@ + ./configure@ + sudo make install@ +} + +glpk@ +@code{@ + wget http://ftp.gnu.org/gnu/glpk/glpk-4.47.tar.gz@ + tar xvfz glpk-4.47.tar.gz@ + cd glpk-4.47@ + ./configure@ + sudo make install@ +} + +libgpg-error@ +@code{@ + wget ftp://ftp.gnupg.org/gcrypt/libgpg-error/libgpg-error-1.10.tar.bz2@ + tar xvfj libgpg-error-1.10.tar.bz2@ + cd libgpg-error-1.10@ + ./configure --prefix=/usr@ + sudo make install@ +} + +libgcrypt@ +@code{@ + wget ftp://ftp.gnupg.org/gcrypt/libgcrypt/libgcrypt-1.5.0.tar.bz2@ + tar xvfj libgcrypt-1.5.0.tar.tar.bz2@ + cd libgcrypt-1.5.0@ + ./configure --prefix=/usr@ + sudo make install@ +} + +libcurl@ +@code{@ + wget http://curl.haxx.se/download/curl-7.26.0.tar.gz@ + tar xvfz curl-7.26.0.tar.gz@ + cd curl-7.26.0@ + ./configure@ + sudo make install@ +} + +libunistring@ +@code{@ + wget http://ftp.gnu.org/gnu/libunistring/libunistring-0.9.3.tar.gz@ + tar xvfz libunistring-0.9.3.tar.gz@ + cd libunistring-0.9.3@ + ./configure@ + sudo make install@ +} + +4. Remove conflicting packages@ +@code{@ + sudo rpm -e --nodeps libgcrypt libgpg-error@ +} + +4. Install libextractor@ +@code{@ + wget ftp://ftp.gnu.org/gnu/libextractor/libextractor-0.6.3.tar.gz@ + tar xvfz libextractor-0.6.3.tar.gz@ + cd libextractor-0.6.3@ + ./configure@ + sudo make install@ +} + +5. Install libmicrohttpd and dependencies + +nettle@ +@code{@ + wget http://ftp.gnu.org/gnu/nettle/nettle-2.5.tar.gz@ + tar xvfz nettle-2.5.tar.gz@ + cd nettle-2.5@ + ./configure@ + sudo make install@ +} + +GnuTLS@ +@code{@ + wget http://ftp.gnu.org/gnu/gnutls/gnutls-2.12.20.tar.bz2@ + tar xvfj gnutls-2.12.20.tar.bz2@ + cd gnutls-2.12.20@ + ./configure --without-p11-kit@ + sudo make install@ +} + +libmicrohttpd@ +@code{@ + wget ftp://ftp.gnu.org/gnu/libmicrohttpd/libmicrohttpd-0.9.21.tar.gz@ + tar xvfz libmicrohttpd-0.9.21.tar.gz@ + cd libmicrohttpd-0.9.21@ + ./configure@ + sudo make install@ +} + +6. Set GNUnet prefix and add to PATH@ +@code{@ + export GNUNET_PREFIX=@ + export PATH=$PATH:$GNUNET_PREFIX/bin@ +} + +7. Install GNUnet from svn@ +@example + export LD_LIBRARY_PATH=/usr/local/lib@ + svn co https://gnunet.org/svn/gnunet@ + cd gnunet@ + libtoolize@ + ./bootstrap@ + ./configure --prefix=$GNUNET_PREFIX --with-extractor=/usr/local \ + --with-curl=/usr/local --with-mysql=/usr/lib/mysql --enable-logging=verbose@ + make install@ +@end example + +Done! + + +@node Build instructions for FreeBSD 8 +@subsection Build instructions for FreeBSD 8 + +To get GNUnet 0.9 to compile on FreeBSD (at least FreeBSD 8.0):@ in order to +install the library @code{libiconv}, at first change the directory to your +ports directory, e.g.@ +@code{@ + $ cd /usr/ports/@ +}@ + following that, go to the install file of @code{libiconv} and install it,@ +@code{@ + $ cd converters/libiconv,@ + $ make install@ +} + +after that, change the directory to where you will check out +@code{libextractor} and GNUnet, and install latest @code{libextractor},@ + first of all, checkout @code{libextractor}, e.g.@ +@code{@ + $ svn co https://gnunet.org/svn/Extractor@ +}@ + then change the directory into which it was checked out, e.g.@ +@code{@ + $ cd Extractor@ +}@ + before the installation, you should do following steps,@ + +@example +$ ./bootstrap@ +$ ./configure --with-ltdl-include=/usr/local/include \ + --with-ltdl-lib=/usr/local/lib@ +@end example + +if these steps complete successfully, you can install the library,@ + +@example +$ make install@ +@end example + +to check out the GNUnet, you should do the similar steps as +@code{libextractor}, firstly, change back to starting directory, e.g.@ +@code{@ + $ cd ../@ +}@ + Set the following environmental variables:@ +@code{@ + export CPPFLAGS="-I/usr/local/include"@ + export LDFLAGS="-L/usr/local/lib"@ +}@ + next, checkout GNUnet using@ +@code{@ + $ svn co https://gnunet.org/svn/gnunet@ +}@ + then change directory into newly checked out directory,@ +@code{@ + $ cd gnunet@ +}@ + at last, start to install GNUnet,@ + +@example + $ ./bootstrap@ + $ ./configure --with-ltdl-include=/usr/local/include \ + --with-ltdl-lib=/usr/local/lib --with-extractor=/usr/local + +## NOTE: you may not need the --with-extractor option!@ + +$ make install +@end example + + + +@node Basic installation for Mac OS X +@subsection Basic installation for Mac OS X + +This documentation may be outdated! + +This page is providing guidelines for users trying to install GNUnet on Mac OS +X.@ Mainly users trying to install GNUnet by building source code are the most +welcome readers.@ The steps below are tested on an Intel Architecture running +Mac OS X Tiger (10.4.11). Ideally they should work on other Mac boxes with +different configurations as all the configuration done for it is dependent on +@uref{http://www.macports.org/, MacPorts} + +For having GNUnet installed successfully, some dependencies should be firstly +resolved: + +@itemize @bullet + +@item +Install/Update your @uref{http://developer.apple.com/tools/xcode/, Xcode} +version 3.2.1 or later for Snow Leopard, 3.1.4 or later for Leopard, or 2.5 for +Tiger. + +@item +Download and install @uref{http://www.macports.org/, MacPorts}.@ +Now you are ready for installing GNunet dependencies. + +@item +First, you'd better make sure that: /opt/local/bin and /opt/local/sbin are +available in your PATH. (For doing so, open a terminal and type:@ + +@example +$ echo $PATH +@end example + +and examine the output of it). If the paths are not available in your +environment, you have to add them (You can add them by editing your .profile +file in your home directory, append them to the PATH line). Then type: +@example +$ source ~/.profile +@end example + +and re-examine the echo command output. + +@item +Use MacPorts to download and install the dependencies:@ +The libraries are: + +@itemize @bullet + +@item +@uref{http://trac.macports.org/browser/trunk/dports/www/libmicrohttpd/Portfile, libmicrohttpd.} + +@item +@uref{http://trac.macports.org/browser/trunk/dports/devel/libgcrypt/Portfile, libgcrypt.} + +@item +@uref{http://trac.macports.org/browser/trunk/dports/net/curl/Portfile, libcurl.} + +@item +@uref{http://trac.macports.org/browser/trunk/dports/devel/libtool/Portfile, libltdl.} + +@item +@uref{http://trac.macports.org/browser/trunk/dports/databases/sqlite3/Portfile, SQlite.} + +@item +libunistring + +@item +glpk + +@end itemize + +The port command is as follows:@ +@example +port install libmicrohttpd libgcrypt curl libtool sqlite3 linunistring glpk +@end example +One of the dependencies, the libextractor, should be explicitly installed, +since the version available from macports is outdated to work with GNUnet. To +install the latest libextractor: +@itemize @bullet + + +@item +Install the Subversion Client:@ +For more information about Subversion visit: +@uref{http://subversion.tigris.org/, http://subversion.tigris.org/} + +@example +# port install subversion +@end example + + +@item +Use Subversion to download the latest Extractor: +@example +$ svn checkout https://gnunet.org/svn/Extractor +@end example + + +@item +Go to the installation directory of the Extractor, compile and install it: +@example +$ ./bootstrap +$ export CPPFLAGS="-I/opt/local/include" +$ export LDFLAGS="-L/opt/local/lib" +$ ./configure --prefix=/opt/local +$ make +# make install +@end example + +@end itemize + + +@item +Now, your system is ready to install GNunet. If you downloaded GNUnet by +checking it out from svn, you should start by running the bootstrap script. +Open a terminal pointing to the GNUnet directory and type:@ + +@example +$ ./bootstrap +@end example + + +@item +Run the configure script: +@example +$ export CPPFLAGS="-I/opt/local/include" +$ export LDFLAGS="-L/opt/local/lib" +$ ./configure --prefix=/tmp/gnunet_build +@end example + + +GNUnet will be installed in the directory /tmp/gnunet_build (Of course that +installation path can be changed).@ The CPPFLAGS and LDFLAGS are mentioned in +order to inform the compiler and the linker to lookup headers and libraries in +/opt/local/include and /opt/local/lib. + +@item +Compile@ + +@example +$ make +@end example + + +@item +Install GNUnet +@example +# make install +@end example + +@end itemize + + +@node Basic Installation for Fedora/PlanetLab nodes running Fedora 12 +@subsection Basic Installation for Fedora/PlanetLab nodes running Fedora 12 + + +@strong{This documentation is outdated and not valid for GNUnet 0.10.0!}@ + +GNUnet installation on Fedora 8/Planetlab nodes can be done as following: + +1. Install the build tools to build GNUnet@ +@example +sudo yum -y -t --nogpgcheck install gcc make autoconf gettext-devel \ +texinfo subversion@ +@end example + +2. Install the GNUnet dependencies@ +@example +sudo yum -y -t --nogpgcheck install libunistring-devel libunistring-devel \ +libgcrypt-devel zlib-devel sqlite-devel postgresql-devel mysql-devel \ +libgsf-devel libvorbis-devel@ +@end example + +3. Install outdated dependencies from source@ +libtool@ +@example +wget http://ftp.gnu.org/gnu/libtool/libtool-2.4.2.tar.gz@ +tar xvfz libtool-2.4.2.tar.gz@ +cd libtool-2.4.2@ +./configure@ +sudo make install@ +@end example + +glpk@ +@example +wget http://ftp.gnu.org/gnu/glpk/glpk-4.47.tar.gz@ +tar xvfz glpk-4.47.tar.gz@ +cd glpk-4.47@ +./configure@ +sudo make install@ +@end example + +libcurl@ +@example +wget http://curl.haxx.se/download/curl-7.26.0.tar.gz@ +tar xvfz curl-7.26.0.tar.gz@ +cd curl-7.26.0@ +./configure@ +sudo make install@ +@end example + +4. Install libextractor@ +@example +svn co https://gnunet.org/svn/libextractor@ +cd libextractor@ +libtoolize@ +./bootstrap@ +./configure@ +sudo make install@ +@end example + +5. Install libmicrohttpd@ +@example +svn co https://gnunet.org/svn/libmicrohttpd@ +cd libmicrohttpd@ +libtoolize@ +./bootstrap@ +./configure@ +sudo make install@ +@end example + +6. Set GNUnet prefix and add to PATH@ +@example +export GNUNET_PREFIX=@ +export PATH=$PATH:$GNUNET_PREFIX/bin@ +@end example + +7. Install GNUnet from svn@ +@example +export LD_LIBRARY_PATH=/usr/local/lib@ +svn co https://gnunet.org/svn/gnunet@ +cd gnunet@ +libtoolize@ +./bootstrap@ +./configure --prefix=$GNUNET_PREFIX --with-extractor=/usr \ + --with-mysql=/usr/lib/mysql --enable-logging=verbose@ +make install@ +@end example + +Done! + + +@node Basic Installation for Fedora/PlanetLab nodes running Fedora 8 . +@subsection Basic Installation for Fedora/PlanetLab nodes running Fedora 8 . +@c %**end of header + +@strong{This documentation is outdated and not valid for GNUnet 0.10.0!}@ + GNUnet installation on Fedora 8/Planetlab nodes can be done as following: + +1. Install the build tools to build GNUnet@ +@example +sudo yum -y -t --nogpgcheck install gcc make automake autoconf gettext-devel \ +texinfo zlib-devel subversion@ +@end example + +2. Install the GNUnet dependencies@ +@example +sudo yum -y -t --nogpgcheck install gnutls-devel gnutls-devel libgcrypt-devel \ +sqlite-devel postgresql-devel mysql-devel libgsf-devel libvorbis-devel \ +libidn-devel +@end example + +3. Install outdated dependencies from source@ + libtool@ +@code{@ + wget http://ftp.gnu.org/gnu/libtool/libtool-2.4.2.tar.gz@ + tar xvfz libtool-2.4.2.tar.gz@ + cd libtool-2.4.2@ + ./configure@ + sudo make install@ +} + +libtool@ +@code{@ + wget http://ftp.gnu.org/gnu/libtool/libtool-2.4.2.tar.gz@ + tar xvfz libtool-2.4.2.tar.gz@ + cd libtool-2.4.2@ + ./configure@ + sudo make install@ +} + +glpk@ +@code{@ + wget http://ftp.gnu.org/gnu/glpk/glpk-4.47.tar.gz@ + tar xvfz glpk-4.47.tar.gz@ + cd glpk-4.47@ + ./configure@ + sudo make install@ +} + +libgpg-error@ +@code{@ + wget ftp://ftp.gnupg.org/gcrypt/libgpg-error/libgpg-error-1.10.tar.bz2@ + tar xvfj libgpg-error-1.10.tar.bz2@ + cd libgpg-error-1.10@ + ./configure --prefix=/usr@ + sudo make install@ +} + +libgcrypt@ +@code{@ + wget ftp://ftp.gnupg.org/gcrypt/libgcrypt/libgcrypt-1.5.0.tar.bz2@ + tar xvfj libgcrypt-1.5.0.tar.tar.bz2@ + cd libgcrypt-1.5.0@ + ./configure --prefix=/usr@ + sudo make install@ +} + +libcurl@ +@code{@ + wget http://curl.haxx.se/download/curl-7.26.0.tar.gz@ + tar xvfz curl-7.26.0.tar.gz@ + cd curl-7.26.0@ + ./configure@ + sudo make install@ +} + +libunistring@ +@code{@ + wget http://ftp.gnu.org/gnu/libunistring/libunistring-0.9.3.tar.gz@ + tar xvfz libunistring-0.9.3.tar.gz@ + cd libunistring-0.9.3@ + ./configure@ + sudo make install@ +} + +4. Remove conflicting packages@ +@code{@ + sudo rpm -e --nodeps libgcrypt libgpg-error@ +} + +4. Install libextractor@ +@code{@ + wget ftp://ftp.gnu.org/gnu/libextractor/libextractor-0.6.3.tar.gz@ + tar xvfz libextractor-0.6.3.tar.gz@ + cd libextractor-0.6.3@ + ./configure@ + sudo make install@ +} + +5. Install libmicrohttpd and dependencies + +nettle@ +@code{@ + wget http://ftp.gnu.org/gnu/nettle/nettle-2.5.tar.gz@ + tar xvfz nettle-2.5.tar.gz@ + cd nettle-2.5@ + ./configure@ + sudo make install@ +} + +GnuTLS@ +@code{@ + wget http://ftp.gnu.org/gnu/gnutls/gnutls-2.12.20.tar.bz2@ + tar xvfj gnutls-2.12.20.tar.bz2@ + cd gnutls-2.12.20@ + ./configure --without-p11-kit@ + sudo make install@ +} + +libmicrohttpd@ +@code{@ + wget ftp://ftp.gnu.org/gnu/libmicrohttpd/libmicrohttpd-0.9.21.tar.gz@ + tar xvfz libmicrohttpd-0.9.21.tar.gz@ + cd libmicrohttpd-0.9.21@ + ./configure@ + sudo make install@ +} + +6. Set GNUnet prefix and add to PATH@ +@code{@ + export GNUNET_PREFIX=@ + export PATH=$PATH:$GNUNET_PREFIX/bin@ +} + +7. Install GNUnet from svn@ +@example + export LD_LIBRARY_PATH=/usr/local/lib@ + svn co https://gnunet.org/svn/gnunet@ + cd gnunet@ + libtoolize@ + ./bootstrap@ + ./configure --prefix=$GNUNET_PREFIX --with-extractor=/usr/local \ + --with-curl=/usr/local --with-mysql=/usr/lib/mysql --enable-logging=verbose@ + make install@ +@end example + +Done! + + -- cgit v1.2.3