[PATHS] SERVICEHOME = ~/.gnunet/ # SERVICEHOME = /var/lib/gnunet/ # DEFAULTCONFIG = /etc/gnunet.conf # If 'DEFAULTCONFIG' is not defined, the current # configuration file is assumed to be the default, # which is what we want by default... [gnunetd] HOSTKEY = $SERVICEHOME/.hostkey [TESTING] WEAKRANDOM = NO # How long before failing a connection? CONNECT_TIMEOUT = 30 # How many connect attempts should we make? CONNECT_ATTEMPTS = 3 # How many connections can happen simultaneously? MAX_OUTSTANDING_CONNECTIONS = 50 # Should we clean up the files on peer group shutdown? DELETE_FILES = YES [client] HOME = $SERVICEHOME [nat] # Are we behind NAT? BEHIND_NAT = NO # Is the NAT hole-punched? PUNCHED_NAT = NO # Enable UPNP by default? ENABLE_UPNP = NO # Use addresses from the local network interfaces (inluding loopback, but also others) USE_LOCALADDR = YES # Use address obtained from a DNS lookup of our hostname USE_HOSTNAME = NO # External IP address of the NAT box (if known); IPv4 dotted-decimal ONLY at this time (should allow DynDNS!) # normal interface IP address for non-NATed peers; # possibly auto-detected (using UPnP) if possible if not specified # EXTERNAL_ADDRESS = # Should we use ICMP-based NAT traversal to try connect to NATed peers # or, if we are behind NAT, to allow connections to us? ENABLE_ICMP_CLIENT = NO ENABLE_ICMP_SERVER = NO # IP address of the interface connected to the NAT box; IPv4 dotted-decimal ONLY; # normal interface IP address for non-NATed peers; # likely auto-detected (via interface list) if not specified (!) # INTERNAL_ADDRESS = # Disable IPv6 support DISABLEV6 = NO # How often do we query the DNS resolver # for our hostname (to get our own IP), in ms HOSTNAME_DNS_FREQUENCY = 1200000 # How often do we iterate over our # network interfaces to check for changes # in our IP address? in ms IFC_SCAN_FREQUENCY = 3000000 # How often do we query the DNS resolver # for our hostname (to get our own IP), in ms DYNDNS_FREQUENCY = 140000 [gnunet-nat-server] HOSTNAME = gnunet.org PORT = 5724 [transport-tcp] # Use 0 to ONLY advertise as a peer behind NAT (no port binding) PORT = 2086 ADVERTISED_PORT = 2086 # Maximum number of open TCP connections allowed MAX_CONNECTIONS = 128 TIMEOUT = 5000 # ACCEPT_FROM = # ACCEPT_FROM6 = # REJECT_FROM = # REJECT_FROM6 = # BINDTO = MAX_CONNECTIONS = 128 [transport-udp] PORT = 2086 MAX_BPS = 1000000 [transport-http] PORT = 1080 MAX_CONNECTIONS = 128 [transport-https] PORT = 4433 CRYPTO_INIT = NORMAL KEY_FILE = https.key CERT_FILE = https.cert MAX_CONNECTIONS = 128 [transport-wlan] # Name of the interface in monitor mode (typically monX) INTERFACE = mon0 # Real hardware, no testing TESTMODE = 0 [arm] PORT = 2087 HOSTNAME = localhost HOME = $SERVICEHOME CONFIG = $DEFAULTCONFIG BINARY = gnunet-service-arm ACCEPT_FROM = 127.0.0.1; ACCEPT_FROM6 = ::1; DEFAULTSERVICES = topology hostlist UNIXPATH = /tmp/gnunet-service-arm.sock UNIX_MATCH_UID = YES UNIX_MATCH_GID = YES # GLOBAL_POSTFIX = -l $SERVICEHOME/{}-logs # GLOBAL_PREFIX = # USERNAME = # MAXBUF = # TIMEOUT = # DISABLEV6 = # BINDTO = # REJECT_FROM = # REJECT_FROM6 = # PREFIX = [statistics] AUTOSTART = YES PORT = 2088 HOSTNAME = localhost HOME = $SERVICEHOME CONFIG = $DEFAULTCONFIG BINARY = gnunet-service-statistics ACCEPT_FROM = 127.0.0.1; ACCEPT_FROM6 = ::1; UNIXPATH = /tmp/gnunet-service-statistics.sock UNIX_MATCH_UID = NO UNIX_MATCH_GID = YES # DISABLE_SOCKET_FORWARDING = NO # USERNAME = # MAXBUF = # TIMEOUT = # DISABLEV6 = # BINDTO = # REJECT_FROM = # REJECT_FROM6 = # PREFIX = [resolver] AUTOSTART = YES PORT = 2089 HOSTNAME = localhost HOME = $SERVICEHOME CONFIG = $DEFAULTCONFIG BINARY = gnunet-service-resolver ACCEPT_FROM = 127.0.0.1; ACCEPT_FROM6 = ::1; UNIXPATH = /tmp/gnunet-service-resolver.sock UNIX_MATCH_UID = NO UNIX_MATCH_GID = NO # DISABLE_SOCKET_FORWARDING = NO # USERNAME = # MAXBUF = # TIMEOUT = # DISABLEV6 = # BINDTO = # REJECT_FROM = # REJECT_FROM6 = # PREFIX = [peerinfo] AUTOSTART = YES PORT = 2090 HOSTNAME = localhost HOME = $SERVICEHOME CONFIG = $DEFAULTCONFIG BINARY = gnunet-service-peerinfo ACCEPT_FROM = 127.0.0.1; ACCEPT_FROM6 = ::1; UNIXPATH = /tmp/gnunet-service-peerinfo.sock UNIX_MATCH_UID = NO UNIX_MATCH_GID = YES # DISABLE_SOCKET_FORWARDING = NO # USERNAME = # MAXBUF = # TIMEOUT = # DISABLEV6 = # BINDTO = # REJECT_FROM = # REJECT_FROM6 = # PREFIX = HOSTS = $SERVICEHOME/data/hosts/ [transport] AUTOSTART = YES PORT = 2091 HOSTNAME = localhost HOME = $SERVICEHOME CONFIG = $DEFAULTCONFIG BINARY = gnunet-service-transport #PREFIX = valgrind NEIGHBOUR_LIMIT = 50 ACCEPT_FROM = 127.0.0.1; ACCEPT_FROM6 = ::1; PLUGINS = tcp UNIXPATH = /tmp/gnunet-service-transport.sock BLACKLIST_FILE = $SERVICEHOME/blacklist UNIX_MATCH_UID = YES UNIX_MATCH_GID = YES # DISABLE_SOCKET_FORWARDING = NO # USERNAME = # MAXBUF = # TIMEOUT = # DISABLEV6 = # BINDTO = # REJECT_FROM = # REJECT_FROM6 = # PREFIX = # ATS options DUMP_MLP = NO DUMP_SOLUTION = NO DUMP_OVERWRITE = NO DUMP_MIN_PEERS = 0 DUMP_MIN_ADDRS = 0 DUMP_OVERWRITE = NO ATS_MIN_INTERVAL = 15000 ATS_EXEC_INTERVAL = 30000 [core] AUTOSTART = YES PORT = 2092 HOSTNAME = localhost HOME = $SERVICEHOME CONFIG = $DEFAULTCONFIG BINARY = gnunet-service-core ACCEPT_FROM = 127.0.0.1; ACCEPT_FROM6 = ::1; # quotas are in bytes per second now! TOTAL_QUOTA_IN = 65536 TOTAL_QUOTA_OUT = 65536 UNIXPATH = /tmp/gnunet-service-core.sock UNIX_MATCH_UID = YES UNIX_MATCH_GID = YES # DISABLE_SOCKET_FORWARDING = NO # DEBUG = YES # USERNAME = # MAXBUF = # TIMEOUT = # DISABLEV6 = # BINDTO = # REJECT_FROM = # REJECT_FROM6 = # PREFIX = [topology] MINIMUM-FRIENDS = 0 FRIENDS-ONLY = NO AUTOCONNECT = YES TARGET-CONNECTION-COUNT = 16 FRIENDS = $SERVICEHOME/friends CONFIG = $DEFAULTCONFIG BINARY = gnunet-daemon-topology [hostlist] # port for hostlist http server HTTPPORT = 8080 HOME = $SERVICEHOME HOSTLISTFILE = $SERVICEHOME/hostlist/learned.data CONFIG = $DEFAULTCONFIG BINARY = gnunet-daemon-hostlist # consider having "-e" as default as well once implemented OPTIONS = -b SERVERS = http://v9.gnunet.org:58080/ # proxy for downloading hostlists HTTP-PROXY = [datastore] AUTOSTART = YES UNIXPATH = /tmp/gnunet-service-datastore.sock UNIX_MATCH_UID = YES UNIX_MATCH_GID = YES PORT = 2093 HOSTNAME = localhost HOME = $SERVICEHOME CONFIG = $DEFAULTCONFIG BINARY = gnunet-service-datastore ACCEPT_FROM = 127.0.0.1; ACCEPT_FROM6 = ::1; QUOTA = 100000000 BLOOMFILTER = $SERVICEHOME/fs/bloomfilter DATABASE = sqlite # DISABLE_SOCKET_FORWARDING = NO [datastore-sqlite] FILENAME = $SERVICEHOME/datastore/sqlite.db [datastore-postgres] CONFIG = connect_timeout=10; dbname=gnunet [datastore-mysql] DATABASE = gnunet CONFIG = ~/.my.cnf # USER = gnunet # PASSWORD = # HOST = localhost # PORT = 3306 [datacache-mysql] DATABASE = gnunetcheck CONFIG = ~/.my.cnf # USER = gnunet # PASSWORD = # HOST = localhost # PORT = 3306 [fs] AUTOSTART = YES INDEXDB = $SERVICEHOME/idxinfo.lst TRUST = $SERVICEHOME/data/credit/ IDENTITY_DIR = $SERVICEHOME/identities/ STATE_DIR = $SERVICEHOME/persistence/ UPDATE_DIR = $SERVICEHOME/updates/ PORT = 2094 HOSTNAME = localhost HOME = $SERVICEHOME CONFIG = $DEFAULTCONFIG BINARY = gnunet-service-fs ACCEPT_FROM = 127.0.0.1; ACCEPT_FROM6 = ::1; DELAY = YES CONTENT_CACHING = YES CONTENT_PUSHING = YES UNIXPATH = /tmp/gnunet-service-fs.sock UNIX_MATCH_UID = NO UNIX_MATCH_GID = YES # DISABLE_SOCKET_FORWARDING = NO # DEBUG = YES MAX_PENDING_REQUESTS = 65536 # Maximum frequency we're allowed to poll the datastore # for content for migration (can be used to reduce # GNUnet's disk-IO rate) MIN_MIGRATION_DELAY = 100 EXPECTED_NEIGHBOUR_COUNT = 128 [dht] AUTOSTART = YES PORT = 2095 HOSTNAME = localhost HOME = $SERVICEHOME CONFIG = $DEFAULTCONFIG BINARY = gnunet-service-dht ACCEPT_FROM = 127.0.0.1; ACCEPT_FROM6 = ::1; BUCKET_SIZE = 4 UNIXPATH = /tmp/gnunet-service-dht.sock UNIX_MATCH_UID = YES UNIX_MATCH_GID = YES # DISABLE_SOCKET_FORWARDING = NO # DEBUG = YES # USERNAME = # MAXBUF = # TIMEOUT = # DISABLEV6 = # BINDTO = # REJECT_FROM = # REJECT_FROM6 = # PREFIX = # DO_FIND_PEER = # STRICT_KADEMLIA = # USE_MAX_HOPS = # MAX_HOPS = # REPUBLISH = YES # REPLICATION_FREQUENCY = 60 # STOP_ON_CLOSEST = # STOP_FOUND = # CONVERGE_MODIFIER = [dhtcache] DATABASE = sqlite QUOTA = 1024000 [block] PLUGINS = fs dht test dns [mesh] AUTOSTART = YES PORT = 2096 HOSTNAME = localhost HOME = $SERVICEHOME CONFIG = $DEFAULTCONFIG BINARY = gnunet-service-mesh ACCEPT_FROM = 127.0.0.1; ACCEPT_FROM6 = ::1; UNIXPATH = /tmp/gnunet-service-mesh.sock UNIX_MATCH_UID = YES UNIX_MATCH_GID = YES [nse] AUTOSTART = YES PORT = 2097 HOSTNAME = localhost HOME = $SERVICEHOME CONFIG = $DEFAULTCONFIG BINARY = gnunet-service-nse ACCEPT_FROM = 127.0.0.1; ACCEPT_FROM6 = ::1; UNIXPATH = /tmp/test-nse-service-nse.unix UNIX_MATCH_UID = YES UNIX_MATCH_GID = YES PROOFFILE = $SERVICEHOME/.nse-proof HISTOGRAM = $SERVICEHOME/nse-history.log # How 'slowly' should the proof-of-work be constructed (delay # between rounds in ms); sane values between 0 and ~1000. WORKDELAY = 5 # Note: changing any of the values below will make this peer # completely incompatible with other peers! INTERVAL = 3600000 WORKBITS = 20 [vpn] CONFIG = $DEFAULTCONFIG BINARY = gnunet-daemon-vpn IPV6ADDR = 1234::1 IPV6PREFIX = 32 IPV4ADDR = 10.11.10.1 IPV4MASK = 255.255.0.0 VIRTDNS = 10.11.10.2 IFNAME = vpn-gnunet [exit] CONFIG = $DEFAULTCONFIG BINARY = gnunet-daemon-exit IPV6ADDR = 1234:1::1 IPV6PREFIX = 32 IPV4ADDR = 10.10.1.1 IPV4MASK = 255.255.0.0 IFNAME = exit-gnunet ENABLE_UDP = NO ENABLE_TCP = NO [dns] AUTOSTART = YES PORT = 0 HOSTNAME = localhost HOME = $SERVICEHOME CONFIG = $DEFAULTCONFIG BINARY = gnunet-service-dns ACCEPT_FROM = 127.0.0.1; ACCEPT_FROM6 = ::1; UNIXPATH = /tmp/gnunet-service-dns.sock PROVIDE_EXIT = NO