better glade detection

7 files changed, 2178 insertions, 3865 deletions

diff --git a/configure.ac b/configure.ac
index 2154cc85..26ce2fd5 100644
--- a/configure.ac
+++ b/configure.ac
@@ -178,7 +178,7 @@ fi
 CFLAGS="$CFLAGS $GTK_CFLAGS"
 CPPFLAGS="$CPPFLAGS $GTK_CFLAGS"
 LIBS="$LIBS $GTK_LIBS"
-AC_CHECK_HEADERS([glib.h gmodule.h gtk/gtk.h],,AC_MSG_ERROR([gnunet-gtk requires GTK]))
+AC_CHECK_HEADERS([glib.h gmodule.h gtk/gtk.h gdk/gdk.h],,AC_MSG_ERROR([gnunet-gtk requires GTK]))
 
 
 
@@ -226,7 +226,7 @@ then
   LIBS="$GLADE_LIBS $backup_LIBS"
   CFLAGS="$GLADE_CFLAGS $backup_CFLAGS"
   CPPFLAGS="$GLADE_CPPFLAGS $backup_CPPFLAGS"
-  AC_CHECK_HEADERS(gladeui/glade.h,
+  AC_CHECK_HEADERS([glib.h gmodule.h gtk/gtk.h gdk/gdk.h gdk/gdkpixbuf.h  gladeui/glade.h],
     AC_CHECK_LIB([gladeui-1], [glade_xml_node_new],
       [glade=1]
     )
@@ -239,7 +239,7 @@ then
     LIBS="$GLADE_LIBS $backup_LIBS"
     CFLAGS="$GLADE_CFLAGS $backup_CFLAGS"
     CPPFLAGS="$GLADE_CPPFLAGS $backup_CPPFLAGS"
-    AC_CHECK_HEADERS(gladeui/glade.h,
+    AC_CHECK_HEADERS([glib.h gmodule.h gtk/gtk.h gdk/gdk.h gdk/gdkpixbuf.h gladeui/glade.h],
       AC_CHECK_LIB([gladeui-2], [glade_xml_node_new],
         glade=2)
     )
diff --git a/ltmain.sh b/ltmain.sh
index c7dd9063..fa4b1e1f 100755
--- a/ltmain.sh
+++ b/ltmain.sh
@@ -1,9 +1,9 @@
+# Generated from ltmain.m4sh.
 
-# libtool (GNU libtool) 2.4
+# ltmain.sh (GNU libtool) 2.2.6b
 # Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
 
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
-# 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc.
 # This is free software; see the source for copying conditions.  There is NO
 # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
 
@@ -32,56 +32,50 @@
 #
 # Provide generalized library-building support services.
 #
-#       --config             show all configuration variables
-#       --debug              enable verbose shell tracing
-#   -n, --dry-run            display commands without modifying any files
-#       --features           display basic configuration information and exit
-#       --mode=MODE          use operation mode MODE
-#       --preserve-dup-deps  don't remove duplicate dependency libraries
-#       --quiet, --silent    don't print informational messages
-#       --no-quiet, --no-silent
-#                            print informational messages (default)
-#       --tag=TAG            use configuration variables from tag TAG
-#   -v, --verbose            print more informational messages than default
-#       --no-verbose         don't print the extra informational messages
-#       --version            print version information
-#   -h, --help, --help-all   print short, long, or detailed help message
+#     --config             show all configuration variables
+#     --debug              enable verbose shell tracing
+# -n, --dry-run            display commands without modifying any files
+#     --features           display basic configuration information and exit
+#     --mode=MODE          use operation mode MODE
+#     --preserve-dup-deps  don't remove duplicate dependency libraries
+#     --quiet, --silent    don't print informational messages
+#     --tag=TAG            use configuration variables from tag TAG
+# -v, --verbose            print informational messages (default)
+#     --version            print version information
+# -h, --help               print short or long help message
 #
 # MODE must be one of the following:
 #
-#         clean              remove files from the build directory
-#         compile            compile a source file into a libtool object
-#         execute            automatically set library path, then run a program
-#         finish             complete the installation of libtool libraries
-#         install            install libraries or executables
-#         link               create a library or an executable
-#         uninstall          remove libraries from an installed directory
+#       clean              remove files from the build directory
+#       compile            compile a source file into a libtool object
+#       execute            automatically set library path, then run a program
+#       finish             complete the installation of libtool libraries
+#       install            install libraries or executables
+#       link               create a library or an executable
+#       uninstall          remove libraries from an installed directory
 #
-# MODE-ARGS vary depending on the MODE.  When passed as first option,
-# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that.
+# MODE-ARGS vary depending on the MODE.
 # Try `$progname --help --mode=MODE' for a more detailed description of MODE.
 #
 # When reporting a bug, please describe a test case to reproduce it and
 # include the following information:
 #
-#         host-triplet: $host
-#         shell:                $SHELL
-#         compiler:             $LTCC
-#         compiler flags:               $LTCFLAGS
-#         linker:               $LD (gnu? $with_gnu_ld)
-#         $progname:    (GNU libtool) 2.4 Debian-2.4-3
-#         automake:     $automake_version
-#         autoconf:     $autoconf_version
+#       host-triplet:   $host
+#       shell:          $SHELL
+#       compiler:               $LTCC
+#       compiler flags:         $LTCFLAGS
+#       linker:         $LD (gnu? $with_gnu_ld)
+#       $progname:              (GNU libtool) 2.2.6b Debian-2.2.6b-2ubuntu3
+#       automake:               $automake_version
+#       autoconf:               $autoconf_version
 #
 # Report bugs to <bug-libtool@gnu.org>.
-# GNU libtool home page: <http://www.gnu.org/software/libtool/>.
-# General help using GNU software: <http://www.gnu.org/gethelp/>.
 
-PROGRAM=libtool
+PROGRAM=ltmain.sh
 PACKAGE=libtool
-VERSION="2.4 Debian-2.4-3"
+VERSION="2.2.6b Debian-2.2.6b-2ubuntu3"
 TIMESTAMP=""
-package_revision=1.3293
+package_revision=1.3017
 
 # Be Bourne compatible
 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
@@ -97,15 +91,10 @@ fi
 BIN_SH=xpg4; export BIN_SH # for Tru64
 DUALCASE=1; export DUALCASE # for MKS sh
 
-# A function that is used when there is no print builtin or printf.
-func_fallback_echo ()
-{
-  eval 'cat <<_LTECHO_EOF
-$1
-_LTECHO_EOF'
-}
-
 # NLS nuisances: We save the old values to restore during execute mode.
+# Only set LANG and LC_ALL to C if already set.
+# These must not be set unconditionally because not all systems understand
+# e.g. LANG=C (notably SCO).
 lt_user_locale=
 lt_safe_locale=
 for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
@@ -118,24 +107,15 @@ do
           lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
         fi"
 done
-LC_ALL=C
-LANGUAGE=C
-export LANGUAGE LC_ALL
 
 $lt_unset CDPATH
 
 
-# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
-# is ksh but when the shell is invoked as "sh" and the current value of
-# the _XPG environment variable is not equal to 1 (one), the special
-# positional parameter $0, within a function call, is the name of the
-# function.
-progpath="$0"
 
 
 
 : ${CP="cp -f"}
-test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'}
+: ${ECHO="echo"}
 : ${EGREP="/bin/grep -E"}
 : ${FGREP="/bin/grep -F"}
 : ${GREP="/bin/grep"}
@@ -164,27 +144,6 @@ IFS=" 	$lt_nl"
 dirname="s,/[^/]*$,,"
 basename="s,^.*/,,"
 
-# func_dirname file append nondir_replacement
-# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
-# otherwise set result to NONDIR_REPLACEMENT.
-func_dirname ()
-{
-    func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
-    if test "X$func_dirname_result" = "X${1}"; then
-      func_dirname_result="${3}"
-    else
-      func_dirname_result="$func_dirname_result${2}"
-    fi
-} # func_dirname may be replaced by extended shell implementation
-
-
-# func_basename file
-func_basename ()
-{
-    func_basename_result=`$ECHO "${1}" | $SED "$basename"`
-} # func_basename may be replaced by extended shell implementation
-
-
 # func_dirname_and_basename file append nondir_replacement
 # perform func_basename and func_dirname in a single function
 # call:
@@ -199,183 +158,33 @@ func_basename ()
 # those functions but instead duplicate the functionality here.
 func_dirname_and_basename ()
 {
-    # Extract subdirectory from the argument.
-    func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"`
-    if test "X$func_dirname_result" = "X${1}"; then
-      func_dirname_result="${3}"
-    else
-      func_dirname_result="$func_dirname_result${2}"
-    fi
-    func_basename_result=`$ECHO "${1}" | $SED -e "$basename"`
-} # func_dirname_and_basename may be replaced by extended shell implementation
-
-
-# func_stripname prefix suffix name
-# strip PREFIX and SUFFIX off of NAME.
-# PREFIX and SUFFIX must not contain globbing or regex special
-# characters, hashes, percent signs, but SUFFIX may contain a leading
-# dot (in which case that matches only a dot).
-# func_strip_suffix prefix name
-func_stripname ()
-{
-    case ${2} in
-      .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
-      *)  func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
-    esac
-} # func_stripname may be replaced by extended shell implementation
-
-
-# These SED scripts presuppose an absolute path with a trailing slash.
-pathcar='s,^/\([^/]*\).*$,\1,'
-pathcdr='s,^/[^/]*,,'
-removedotparts=':dotsl
-                s@/\./@/@g
-                t dotsl
-                s,/\.$,/,'
-collapseslashes='s@/\{1,\}@/@g'
-finalslash='s,/*$,/,'
-
-# func_normal_abspath PATH
-# Remove doubled-up and trailing slashes, "." path components,
-# and cancel out any ".." path components in PATH after making
-# it an absolute path.
-#             value returned in "$func_normal_abspath_result"
-func_normal_abspath ()
-{
-  # Start from root dir and reassemble the path.
-  func_normal_abspath_result=
-  func_normal_abspath_tpath=$1
-  func_normal_abspath_altnamespace=
-  case $func_normal_abspath_tpath in
-    "")
-      # Empty path, that just means $cwd.
-      func_stripname '' '/' "`pwd`"
-      func_normal_abspath_result=$func_stripname_result
-      return
-    ;;
-    # The next three entries are used to spot a run of precisely
-    # two leading slashes without using negated character classes;
-    # we take advantage of case's first-match behaviour.
-    ///*)
-      # Unusual form of absolute path, do nothing.
-    ;;
-    //*)
-      # Not necessarily an ordinary path; POSIX reserves leading '//'
-      # and for example Cygwin uses it to access remote file shares
-      # over CIFS/SMB, so we conserve a leading double slash if found.
-      func_normal_abspath_altnamespace=/
-    ;;
-    /*)
-      # Absolute path, do nothing.
-    ;;
-    *)
-      # Relative path, prepend $cwd.
-      func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
-    ;;
-  esac
-  # Cancel out all the simple stuff to save iterations.  We also want
-  # the path to end with a slash for ease of parsing, so make sure
-  # there is one (and only one) here.
-  func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
-        -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"`
-  while :; do
-    # Processed it all yet?
-    if test "$func_normal_abspath_tpath" = / ; then
-      # If we ascended to the root using ".." the result may be empty now.
-      if test -z "$func_normal_abspath_result" ; then
-        func_normal_abspath_result=/
-      fi
-      break
-    fi
-    func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
-        -e "$pathcar"`
-    func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
-        -e "$pathcdr"`
-    # Figure out what to do with it
-    case $func_normal_abspath_tcomponent in
-      "")
-        # Trailing empty path component, ignore it.
-      ;;
-      ..)
-        # Parent dir; strip last assembled component from result.
-        func_dirname "$func_normal_abspath_result"
-        func_normal_abspath_result=$func_dirname_result
-      ;;
-      *)
-        # Actual path component, append it.
-        func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent
-      ;;
-    esac
-  done
-  # Restore leading double-slash if one was found on entry.
-  func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
+  # Extract subdirectory from the argument.
+  func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
+  if test "X$func_dirname_result" = "X${1}"; then
+    func_dirname_result="${3}"
+  else
+    func_dirname_result="$func_dirname_result${2}"
+  fi
+  func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
 }
 
-# func_relative_path SRCDIR DSTDIR
-# generates a relative path from SRCDIR to DSTDIR, with a trailing
-# slash if non-empty, suitable for immediately appending a filename
-# without needing to append a separator.
-#             value returned in "$func_relative_path_result"
-func_relative_path ()
-{
-  func_relative_path_result=
-  func_normal_abspath "$1"
-  func_relative_path_tlibdir=$func_normal_abspath_result
-  func_normal_abspath "$2"
-  func_relative_path_tbindir=$func_normal_abspath_result
-
-  # Ascend the tree starting from libdir
-  while :; do
-    # check if we have found a prefix of bindir
-    case $func_relative_path_tbindir in
-      $func_relative_path_tlibdir)
-        # found an exact match
-        func_relative_path_tcancelled=
-        break
-        ;;
-      $func_relative_path_tlibdir*)
-        # found a matching prefix
-        func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
-        func_relative_path_tcancelled=$func_stripname_result
-        if test -z "$func_relative_path_result"; then
-          func_relative_path_result=.
-        fi
-        break
-        ;;
-      *)
-        func_dirname $func_relative_path_tlibdir
-        func_relative_path_tlibdir=${func_dirname_result}
-        if test "x$func_relative_path_tlibdir" = x ; then
-          # Have to descend all the way to the root!
-          func_relative_path_result=../$func_relative_path_result
-          func_relative_path_tcancelled=$func_relative_path_tbindir
-          break
-        fi
-        func_relative_path_result=../$func_relative_path_result
-        ;;
-    esac
-  done
-
-  # Now calculate path; take care to avoid doubling-up slashes.
-  func_stripname '' '/' "$func_relative_path_result"
-  func_relative_path_result=$func_stripname_result
-  func_stripname '/' '/' "$func_relative_path_tcancelled"
-  if test "x$func_stripname_result" != x ; then
-    func_relative_path_result=${func_relative_path_result}/${func_stripname_result}
-  fi
+# Generated shell functions inserted here.
 
-  # Normalisation. If bindir is libdir, return empty string,
-  # else relative path ending with a slash; either way, target
-  # file name can be directly appended.
-  if test ! -z "$func_relative_path_result"; then
-    func_stripname './' '' "$func_relative_path_result/"
-    func_relative_path_result=$func_stripname_result
-  fi
-}
+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+# is ksh but when the shell is invoked as "sh" and the current value of
+# the _XPG environment variable is not equal to 1 (one), the special
+# positional parameter $0, within a function call, is the name of the
+# function.
+progpath="$0"
 
 # The name of this program:
+# In the unlikely event $progname began with a '-', it would play havoc with
+# func_echo (imagine progname=-n), so we prepend ./ in that case:
 func_dirname_and_basename "$progpath"
 progname=$func_basename_result
+case $progname in
+  -*) progname=./$progname ;;
+esac
 
 # Make sure we have an absolute path for reexecution:
 case $progpath in
@@ -406,15 +215,6 @@ sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
 # Same as above, but do not quote variable references.
 double_quote_subst='s/\(["`\\]\)/\\\1/g'
 
-# Sed substitution that turns a string into a regex matching for the
-# string literally.
-sed_make_literal_regex='s,[].[^$\\*\/],\\&,g'
-
-# Sed substitution that converts a w32 file name or path
-# which contains forward slashes, into one that contains
-# (escaped) backslashes.  A very naive implementation.
-lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
-
 # Re-`\' parameter expansions in output of double_quote_subst that were
 # `\'-ed in input to the same.  If an odd number of `\' preceded a '$'
 # in input to double_quote_subst, that '$' was protected from expansion.
@@ -443,7 +243,7 @@ opt_warning=:
 # name if it has been set yet.
 func_echo ()
 {
-    $ECHO "$progname: ${opt_mode+$opt_mode: }$*"
+    $ECHO "$progname${mode+: }$mode: $*"
 }
 
 # func_verbose arg...
@@ -458,25 +258,18 @@ func_verbose ()
     :
 }
 
-# func_echo_all arg...
-# Invoke $ECHO with all args, space-separated.
-func_echo_all ()
-{
-    $ECHO "$*"
-}
-
 # func_error arg...
 # Echo program name prefixed message to standard error.
 func_error ()
 {
-    $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2
+    $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2
 }
 
 # func_warning arg...
 # Echo program name prefixed warning message to standard error.
 func_warning ()
 {
-    $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2
+    $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2
 
     # bash bug again:
     :
@@ -533,9 +326,9 @@ func_mkdir_p ()
         case $my_directory_path in */*) ;; *) break ;; esac
 
         # ...otherwise throw away the child directory and loop
-        my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"`
+        my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"`
       done
-      my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'`
+      my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'`
 
       save_mkdir_p_IFS="$IFS"; IFS=':'
       for my_dir in $my_dir_list; do
@@ -585,7 +378,7 @@ func_mktempdir ()
         func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
     fi
 
-    $ECHO "$my_tmpdir"
+    $ECHO "X$my_tmpdir" | $Xsed
 }
 
 
@@ -599,7 +392,7 @@ func_quote_for_eval ()
 {
     case $1 in
       *[\\\`\"\$]*)
-        func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;;
+        func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;;
       *)
         func_quote_for_eval_unquoted_result="$1" ;;
     esac
@@ -626,7 +419,7 @@ func_quote_for_expand ()
 {
     case $1 in
       *[\\\`\"]*)
-        my_arg=`$ECHO "$1" | $SED \
+        my_arg=`$ECHO "X$1" | $Xsed \
             -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
       *)
         my_arg="$1" ;;
@@ -695,39 +488,15 @@ func_show_eval_locale ()
     fi
 }
 
-# func_tr_sh
-# Turn $1 into a string suitable for a shell variable name.
-# Result is stored in $func_tr_sh_result.  All characters
-# not in the set a-zA-Z0-9_ are replaced with '_'. Further,
-# if $1 begins with a digit, a '_' is prepended as well.
-func_tr_sh ()
-{
-  case $1 in
-  [0-9]* | *[!a-zA-Z0-9_]*)
-    func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'`
-    ;;
-  * )
-    func_tr_sh_result=$1
-    ;;
-  esac
-}
+
+
 
 
 # func_version
 # Echo version message to standard output and exit.
 func_version ()
 {
-    $opt_debug
-
-    $SED -n '/(C)/!b go
-        :more
-        /\./!{
-          N
-          s/\n# / /
-          b more
-        }
-        :go
-        /^# '$PROGRAM' (GNU /,/# warranty; / {
+    $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / {
         s/^# //
         s/^# *$//
         s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
@@ -740,28 +509,22 @@ func_version ()
 # Echo short help message to standard output and exit.
 func_usage ()
 {
-    $opt_debug
-
-    $SED -n '/^# Usage:/,/^#  *.*--help/ {
+    $SED -n '/^# Usage:/,/# -h/ {
         s/^# //
         s/^# *$//
         s/\$progname/'$progname'/
         p
     }' < "$progpath"
-    echo
+    $ECHO
     $ECHO "run \`$progname --help | more' for full usage"
     exit $?
 }
 
-# func_help [NOEXIT]
-# Echo long help message to standard output and exit,
-# unless 'noexit' is passed as argument.
+# func_help
+# Echo long help message to standard output and exit.
 func_help ()
 {
-    $opt_debug
-
     $SED -n '/^# Usage:/,/# Report bugs to/ {
-        :print
         s/^# //
         s/^# *$//
         s*\$progname*'$progname'*
@@ -774,15 +537,8 @@ func_help ()
         s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/
         s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/
         p
-        d
-     }
-     /^# .* home page:/b print
-     /^# General help using/b print
-     ' < "$progpath"
-    ret=$?
-    if test -z "$1"; then
-      exit $ret
-    fi
+     }' < "$progpath"
+    exit $?
 }
 
 # func_missing_arg argname
@@ -790,106 +546,63 @@ func_help ()
 # exit_cmd.
 func_missing_arg ()
 {
-    $opt_debug
-
-    func_error "missing argument for $1."
+    func_error "missing argument for $1"
     exit_cmd=exit
 }
 
+exit_cmd=:
 
-# func_split_short_opt shortopt
-# Set func_split_short_opt_name and func_split_short_opt_arg shell
-# variables after splitting SHORTOPT after the 2nd character.
-func_split_short_opt ()
-{
-    my_sed_short_opt='1s/^\(..\).*$/\1/;q'
-    my_sed_short_rest='1s/^..\(.*\)$/\1/;q'
-
-    func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"`
-    func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"`
-} # func_split_short_opt may be replaced by extended shell implementation
-
-
-# func_split_long_opt longopt
-# Set func_split_long_opt_name and func_split_long_opt_arg shell
-# variables after splitting LONGOPT at the `=' sign.
-func_split_long_opt ()
-{
-    my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q'
-    my_sed_long_arg='1s/^--[^=]*=//'
-
-    func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"`
-    func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"`
-} # func_split_long_opt may be replaced by extended shell implementation
 
-exit_cmd=:
 
 
 
+# Check that we have a working $ECHO.
+if test "X$1" = X--no-reexec; then
+  # Discard the --no-reexec flag, and continue.
+  shift
+elif test "X$1" = X--fallback-echo; then
+  # Avoid inline document here, it may be left over
+  :
+elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then
+  # Yippee, $ECHO works!
+  :
+else
+  # Restart under the correct shell, and then maybe $ECHO will work.
+  exec $SHELL "$progpath" --no-reexec ${1+"$@"}
+fi
 
+if test "X$1" = X--fallback-echo; then
+  # used as fallback echo
+  shift
+  cat <<EOF
+$*
+EOF
+  exit $EXIT_SUCCESS
+fi
 
 magic="%%%MAGIC variable%%%"
 magic_exe="%%%MAGIC EXE variable%%%"
 
 # Global variables.
+# $mode is unset
 nonopt=
+execute_dlfiles=
 preserve_args=
 lo2o="s/\\.lo\$/.${objext}/"
 o2lo="s/\\.${objext}\$/.lo/"
 extracted_archives=
 extracted_serial=0
 
+opt_dry_run=false
+opt_duplicate_deps=false
+opt_silent=false
+opt_debug=:
+
 # If this variable is set in any of the actions, the command in it
 # will be execed at the end.  This prevents here-documents from being
 # left over by shells.
 exec_cmd=
 
-# func_append var value
-# Append VALUE to the end of shell variable VAR.
-func_append ()
-{
-    eval "${1}=\$${1}\${2}"
-} # func_append may be replaced by extended shell implementation
-
-# func_append_quoted var value
-# Quote VALUE and append to the end of shell variable VAR, separated
-# by a space.
-func_append_quoted ()
-{
-    func_quote_for_eval "${2}"
-    eval "${1}=\$${1}\\ \$func_quote_for_eval_result"
-} # func_append_quoted may be replaced by extended shell implementation
-
-
-# func_arith arithmetic-term...
-func_arith ()
-{
-    func_arith_result=`expr "${@}"`
-} # func_arith may be replaced by extended shell implementation
-
-
-# func_len string
-# STRING may not start with a hyphen.
-func_len ()
-{
-    func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len`
-} # func_len may be replaced by extended shell implementation
-
-
-# func_lo2o object
-func_lo2o ()
-{
-    func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
-} # func_lo2o may be replaced by extended shell implementation
-
-
-# func_xform libobj-or-source
-func_xform ()
-{
-    func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'`
-} # func_xform may be replaced by extended shell implementation
-
-
 # func_fatal_configuration arg...
 # Echo program name prefixed message to standard error, followed by
 # a configuration failure hint, and exit.
@@ -923,16 +636,16 @@ func_config ()
 # Display the features supported by this script.
 func_features ()
 {
-    echo "host: $host"
+    $ECHO "host: $host"
     if test "$build_libtool_libs" = yes; then
-      echo "enable shared libraries"
+      $ECHO "enable shared libraries"
     else
-      echo "disable shared libraries"
+      $ECHO "disable shared libraries"
     fi
     if test "$build_old_libs" = yes; then
-      echo "enable static libraries"
+      $ECHO "enable static libraries"
     else
-      echo "disable static libraries"
+      $ECHO "disable static libraries"
     fi
 
     exit $?
@@ -979,204 +692,117 @@ func_enable_tag ()
   esac
 }
 
-# func_check_version_match
-# Ensure that we are using m4 macros, and libtool script from the same
-# release of libtool.
-func_check_version_match ()
+# Parse options once, thoroughly.  This comes as soon as possible in
+# the script to make things like `libtool --version' happen quickly.
 {
-  if test "$package_revision" != "$macro_revision"; then
-    if test "$VERSION" != "$macro_version"; then
-      if test -z "$macro_version"; then
-        cat >&2 <<_LT_EOF
-$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
-$progname: definition of this LT_INIT comes from an older release.
-$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
-$progname: and run autoconf again.
-_LT_EOF
-      else
-        cat >&2 <<_LT_EOF
-$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
-$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
-$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
-$progname: and run autoconf again.
-_LT_EOF
-      fi
-    else
-      cat >&2 <<_LT_EOF
-$progname: Version mismatch error.  This is $PACKAGE $VERSION, revision $package_revision,
-$progname: but the definition of this LT_INIT comes from revision $macro_revision.
-$progname: You should recreate aclocal.m4 with macros from revision $package_revision
-$progname: of $PACKAGE $VERSION and run autoconf again.
-_LT_EOF
-    fi
-
-    exit $EXIT_MISMATCH
-  fi
-}
-
-
-# Shorthand for --mode=foo, only valid as the first argument
-case $1 in
-clean|clea|cle|cl)
-  shift; set dummy --mode clean ${1+"$@"}; shift
-  ;;
-compile|compil|compi|comp|com|co|c)
-  shift; set dummy --mode compile ${1+"$@"}; shift
-  ;;
-execute|execut|execu|exec|exe|ex|e)
-  shift; set dummy --mode execute ${1+"$@"}; shift
-  ;;
-finish|finis|fini|fin|fi|f)
-  shift; set dummy --mode finish ${1+"$@"}; shift
-  ;;
-install|instal|insta|inst|ins|in|i)
-  shift; set dummy --mode install ${1+"$@"}; shift
-  ;;
-link|lin|li|l)
-  shift; set dummy --mode link ${1+"$@"}; shift
-  ;;
-uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
-  shift; set dummy --mode uninstall ${1+"$@"}; shift
-  ;;
-esac
-
-
-
-# Option defaults:
-opt_debug=:
-opt_dry_run=false
-opt_config=false
-opt_preserve_dup_deps=false
-opt_features=false
-opt_finish=false
-opt_help=false
-opt_help_all=false
-opt_silent=:
-opt_verbose=:
-opt_silent=false
-opt_verbose=false
 
+  # Shorthand for --mode=foo, only valid as the first argument
+  case $1 in
+  clean|clea|cle|cl)
+    shift; set dummy --mode clean ${1+"$@"}; shift
+    ;;
+  compile|compil|compi|comp|com|co|c)
+    shift; set dummy --mode compile ${1+"$@"}; shift
+    ;;
+  execute|execut|execu|exec|exe|ex|e)
+    shift; set dummy --mode execute ${1+"$@"}; shift
+    ;;
+  finish|finis|fini|fin|fi|f)
+    shift; set dummy --mode finish ${1+"$@"}; shift
+    ;;
+  install|instal|insta|inst|ins|in|i)
+    shift; set dummy --mode install ${1+"$@"}; shift
+    ;;
+  link|lin|li|l)
+    shift; set dummy --mode link ${1+"$@"}; shift
+    ;;
+  uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
+    shift; set dummy --mode uninstall ${1+"$@"}; shift
+    ;;
+  esac
 
-# Parse options once, thoroughly.  This comes as soon as possible in the
-# script to make things like `--version' happen as quickly as we can.
-{
-  # this just eases exit handling
-  while test $# -gt 0; do
+  # Parse non-mode specific arguments:
+  while test "$#" -gt 0; do
     opt="$1"
     shift
+
     case $opt in
-      --debug|-x)       opt_debug='set -x'
+      --config)         func_config                                     ;;
+
+      --debug)          preserve_args="$preserve_args $opt"
                         func_echo "enabling shell trace mode"
+                        opt_debug='set -x'
                         $opt_debug
                         ;;
-      --dry-run|--dryrun|-n)
-                        opt_dry_run=:
-                        ;;
-      --config)
-                        opt_config=:
-func_config
-                        ;;
-      --dlopen|-dlopen)
-                        optarg="$1"
-                        opt_dlopen="${opt_dlopen+$opt_dlopen
-}$optarg"
+
+      -dlopen)          test "$#" -eq 0 && func_missing_arg "$opt" && break
+                        execute_dlfiles="$execute_dlfiles $1"
                         shift
                         ;;
-      --preserve-dup-deps)
-                        opt_preserve_dup_deps=:
-                        ;;
-      --features)
-                        opt_features=:
-func_features
-                        ;;
-      --finish)
-                        opt_finish=:
-set dummy --mode finish ${1+"$@"}; shift
-                        ;;
-      --help)
-                        opt_help=:
-                        ;;
-      --help-all)
-                        opt_help_all=:
-opt_help=': help-all'
-                        ;;
-      --mode)
-                        test $# = 0 && func_missing_arg $opt && break
-                        optarg="$1"
-                        opt_mode="$optarg"
-case $optarg in
-  # Valid mode arguments:
-  clean|compile|execute|finish|install|link|relink|uninstall) ;;
-
-  # Catch anything else as an error
-  *) func_error "invalid argument for $opt"
-     exit_cmd=exit
-     break
-     ;;
-esac
+
+      --dry-run | -n)   opt_dry_run=:                                   ;;
+      --features)       func_features                                   ;;
+      --finish)         mode="finish"                                   ;;
+
+      --mode)           test "$#" -eq 0 && func_missing_arg "$opt" && break
+                        case $1 in
+                          # Valid mode arguments:
+                          clean)        ;;
+                          compile)      ;;
+                          execute)      ;;
+                          finish)       ;;
+                          install)      ;;
+                          link)         ;;
+                          relink)       ;;
+                          uninstall)    ;;
+
+                          # Catch anything else as an error
+                          *) func_error "invalid argument for $opt"
+                             exit_cmd=exit
+                             break
+                             ;;
+                        esac
+
+                        mode="$1"
                         shift
                         ;;
-      --no-silent|--no-quiet)
-                        opt_silent=false
-func_append preserve_args " $opt"
-                        ;;
-      --no-verbose)
-                        opt_verbose=false
-func_append preserve_args " $opt"
-                        ;;
-      --silent|--quiet)
+
+      --preserve-dup-deps)
+                        opt_duplicate_deps=:                            ;;
+
+      --quiet|--silent) preserve_args="$preserve_args $opt"
                         opt_silent=:
-func_append preserve_args " $opt"
-        opt_verbose=false
                         ;;
-      --verbose|-v)
-                        opt_verbose=:
-func_append preserve_args " $opt"
-opt_silent=false
+
+      --verbose| -v)    preserve_args="$preserve_args $opt"
+                        opt_silent=false
                         ;;
-      --tag)
-                        test $# = 0 && func_missing_arg $opt && break
-                        optarg="$1"
-                        opt_tag="$optarg"
-func_append preserve_args " $opt $optarg"
-func_enable_tag "$optarg"
+
+      --tag)            test "$#" -eq 0 && func_missing_arg "$opt" && break
+                        preserve_args="$preserve_args $opt $1"
+                        func_enable_tag "$1"    # tagname is set here
                         shift
                         ;;
 
-      -\?|-h)           func_usage                              ;;
-      --help)           func_help                               ;;
-      --version)        func_version                            ;;
-
       # Separate optargs to long options:
-      --*=*)
-                        func_split_long_opt "$opt"
-                        set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"}
+      -dlopen=*|--mode=*|--tag=*)
+                        func_opt_split "$opt"
+                        set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"}
                         shift
                         ;;
 
-      # Separate non-argument short options:
-      -\?*|-h*|-n*|-v*)
-                        func_split_short_opt "$opt"
-                        set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"}
-                        shift
-                        ;;
+      -\?|-h)           func_usage                                      ;;
+      --help)           opt_help=:                                      ;;
+      --version)        func_version                                    ;;
+
+      -*)               func_fatal_help "unrecognized option \`$opt'"   ;;
 
-      --)               break                                   ;;
-      -*)               func_fatal_help "unrecognized option \`$opt'" ;;
-      *)                set dummy "$opt" ${1+"$@"};     shift; break  ;;
+      *)                nonopt="$opt"
+                        break
+                        ;;
     esac
   done
 
-  # Validate options:
-
-  # save first non-option argument
-  if test "$#" -gt 0; then
-    nonopt="$opt"
-    shift
-  fi
-
-  # preserve --debug
-  test "$opt_debug" = : || func_append preserve_args " --debug"
 
   case $host in
     *cygwin* | *mingw* | *pw32* | *cegcc*)
@@ -1184,44 +810,82 @@ func_enable_tag "$optarg"
       opt_duplicate_compiler_generated_deps=:
       ;;
     *)
-      opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
+      opt_duplicate_compiler_generated_deps=$opt_duplicate_deps
       ;;
   esac
 
-  $opt_help || {
-    # Sanity checks first:
-    func_check_version_match
+  # Having warned about all mis-specified options, bail out if
+  # anything was wrong.
+  $exit_cmd $EXIT_FAILURE
+}
 
-    if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
-      func_fatal_configuration "not configured to build any kind of library"
+# func_check_version_match
+# Ensure that we are using m4 macros, and libtool script from the same
+# release of libtool.
+func_check_version_match ()
+{
+  if test "$package_revision" != "$macro_revision"; then
+    if test "$VERSION" != "$macro_version"; then
+      if test -z "$macro_version"; then
+        cat >&2 <<_LT_EOF
+$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from an older release.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+      else
+        cat >&2 <<_LT_EOF
+$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+      fi
+    else
+      cat >&2 <<_LT_EOF
+$progname: Version mismatch error.  This is $PACKAGE $VERSION, revision $package_revision,
+$progname: but the definition of this LT_INIT comes from revision $macro_revision.
+$progname: You should recreate aclocal.m4 with macros from revision $package_revision
+$progname: of $PACKAGE $VERSION and run autoconf again.
+_LT_EOF
     fi
 
-    # Darwin sucks
-    eval std_shrext=\"$shrext_cmds\"
+    exit $EXIT_MISMATCH
+  fi
+}
+
 
-    # Only execute mode is allowed to have -dlopen flags.
-    if test -n "$opt_dlopen" && test "$opt_mode" != execute; then
-      func_error "unrecognized option \`-dlopen'"
-      $ECHO "$help" 1>&2
-      exit $EXIT_FAILURE
-    fi
+## ----------- ##
+##    Main.    ##
+## ----------- ##
 
-    # Change the help message to a mode-specific one.
-    generic_help="$help"
-    help="Try \`$progname --help --mode=$opt_mode' for more information."
-  }
+$opt_help || {
+  # Sanity checks first:
+  func_check_version_match
 
+  if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+    func_fatal_configuration "not configured to build any kind of library"
+  fi
 
-  # Bail if the options were screwed
-  $exit_cmd $EXIT_FAILURE
-}
+  test -z "$mode" && func_fatal_error "error: you must specify a MODE."
 
 
+  # Darwin sucks
+  eval std_shrext=\"$shrext_cmds\"
 
 
-## ----------- ##
-##    Main.    ##
-## ----------- ##
+  # Only execute mode is allowed to have -dlopen flags.
+  if test -n "$execute_dlfiles" && test "$mode" != execute; then
+    func_error "unrecognized option \`-dlopen'"
+    $ECHO "$help" 1>&2
+    exit $EXIT_FAILURE
+  fi
+
+  # Change the help message to a mode-specific one.
+  generic_help="$help"
+  help="Try \`$progname --help --mode=$mode' for more information."
+}
+
 
 # func_lalib_p file
 # True iff FILE is a libtool `.la' library or `.lo' object file.
@@ -1286,9 +950,12 @@ func_ltwrapper_executable_p ()
 # temporary ltwrapper_script.
 func_ltwrapper_scriptname ()
 {
-    func_dirname_and_basename "$1" "" "."
-    func_stripname '' '.exe' "$func_basename_result"
-    func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
+    func_ltwrapper_scriptname_result=""
+    if func_ltwrapper_executable_p "$1"; then
+        func_dirname_and_basename "$1" "" "."
+        func_stripname '' '.exe' "$func_basename_result"
+        func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
+    fi
 }
 
 # func_ltwrapper_p file
@@ -1334,37 +1001,6 @@ func_source ()
 }
 
 
-# func_resolve_sysroot PATH
-# Replace a leading = in PATH with a sysroot.  Store the result into
-# func_resolve_sysroot_result
-func_resolve_sysroot ()
-{
-  func_resolve_sysroot_result=$1
-  case $func_resolve_sysroot_result in
-  =*)
-    func_stripname '=' '' "$func_resolve_sysroot_result"
-    func_resolve_sysroot_result=$lt_sysroot$func_stripname_result
-    ;;
-  esac
-}
-
-# func_replace_sysroot PATH
-# If PATH begins with the sysroot, replace it with = and
-# store the result into func_replace_sysroot_result.
-func_replace_sysroot ()
-{
-  case "$lt_sysroot:$1" in
-  ?*:"$lt_sysroot"*)
-    func_stripname "$lt_sysroot" '' "$1"
-    func_replace_sysroot_result="=$func_stripname_result"
-    ;;
-  *)
-    # Including no sysroot.
-    func_replace_sysroot_result=$1
-    ;;
-  esac
-}
-
 # func_infer_tag arg
 # Infer tagged configuration to use if any are available and
 # if one wasn't chosen via the "--tag" command line option.
@@ -1377,15 +1013,13 @@ func_infer_tag ()
     if test -n "$available_tags" && test -z "$tagname"; then
       CC_quoted=
       for arg in $CC; do
-        func_append_quoted CC_quoted "$arg"
+        func_quote_for_eval "$arg"
+        CC_quoted="$CC_quoted $func_quote_for_eval_result"
       done
-      CC_expanded=`func_echo_all $CC`
-      CC_quoted_expanded=`func_echo_all $CC_quoted`
       case $@ in
       # Blanks in the command may have been stripped by the calling shell,
       # but not from the CC environment variable when configure was run.
-      " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
-      " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;;
+      " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ;;
       # Blanks at the start of $base_compile will cause this to fail
       # if we don't check for them as well.
       *)
@@ -1396,13 +1030,11 @@ func_infer_tag ()
             CC_quoted=
             for arg in $CC; do
               # Double-quote args containing other shell metacharacters.
-              func_append_quoted CC_quoted "$arg"
+              func_quote_for_eval "$arg"
+              CC_quoted="$CC_quoted $func_quote_for_eval_result"
             done
-            CC_expanded=`func_echo_all $CC`
-            CC_quoted_expanded=`func_echo_all $CC_quoted`
             case "$@ " in
-            " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
-            " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*)
+              " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*)
               # The compiler in the base compile command matches
               # the one in the tagged configuration.
               # Assume this is the tagged configuration we want.
@@ -1465,486 +1097,6 @@ EOF
     }
 }
 
-
-##################################################
-# FILE NAME AND PATH CONVERSION HELPER FUNCTIONS #
-##################################################
-
-# func_convert_core_file_wine_to_w32 ARG
-# Helper function used by file name conversion functions when $build is *nix,
-# and $host is mingw, cygwin, or some other w32 environment. Relies on a
-# correctly configured wine environment available, with the winepath program
-# in $build's $PATH.
-#
-# ARG is the $build file name to be converted to w32 format.
-# Result is available in $func_convert_core_file_wine_to_w32_result, and will
-# be empty on error (or when ARG is empty)
-func_convert_core_file_wine_to_w32 ()
-{
-  $opt_debug
-  func_convert_core_file_wine_to_w32_result="$1"
-  if test -n "$1"; then
-    # Unfortunately, winepath does not exit with a non-zero error code, so we
-    # are forced to check the contents of stdout. On the other hand, if the
-    # command is not found, the shell will set an exit code of 127 and print
-    # *an error message* to stdout. So we must check for both error code of
-    # zero AND non-empty stdout, which explains the odd construction:
-    func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null`
-    if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then
-      func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" |
-        $SED -e "$lt_sed_naive_backslashify"`
-    else
-      func_convert_core_file_wine_to_w32_result=
-    fi
-  fi
-}
-# end: func_convert_core_file_wine_to_w32
-
-
-# func_convert_core_path_wine_to_w32 ARG
-# Helper function used by path conversion functions when $build is *nix, and
-# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly
-# configured wine environment available, with the winepath program in $build's
-# $PATH. Assumes ARG has no leading or trailing path separator characters.
-#
-# ARG is path to be converted from $build format to win32.
-# Result is available in $func_convert_core_path_wine_to_w32_result.
-# Unconvertible file (directory) names in ARG are skipped; if no directory names
-# are convertible, then the result may be empty.
-func_convert_core_path_wine_to_w32 ()
-{
-  $opt_debug
-  # unfortunately, winepath doesn't convert paths, only file names
-  func_convert_core_path_wine_to_w32_result=""
-  if test -n "$1"; then
-    oldIFS=$IFS
-    IFS=:
-    for func_convert_core_path_wine_to_w32_f in $1; do
-      IFS=$oldIFS
-      func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f"
-      if test -n "$func_convert_core_file_wine_to_w32_result" ; then
-        if test -z "$func_convert_core_path_wine_to_w32_result"; then
-          func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result"
-        else
-          func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result"
-        fi
-      fi
-    done
-    IFS=$oldIFS
-  fi
-}
-# end: func_convert_core_path_wine_to_w32
-
-
-# func_cygpath ARGS...
-# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when
-# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2)
-# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or
-# (2), returns the Cygwin file name or path in func_cygpath_result (input
-# file name or path is assumed to be in w32 format, as previously converted
-# from $build's *nix or MSYS format). In case (3), returns the w32 file name
-# or path in func_cygpath_result (input file name or path is assumed to be in
-# Cygwin format). Returns an empty string on error.
-#
-# ARGS are passed to cygpath, with the last one being the file name or path to
-# be converted.
-#
-# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH
-# environment variable; do not put it in $PATH.
-func_cygpath ()
-{
-  $opt_debug
-  if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
-    func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
-    if test "$?" -ne 0; then
-      # on failure, ensure result is empty
-      func_cygpath_result=
-    fi
-  else
-    func_cygpath_result=
-    func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'"
-  fi
-}
-#end: func_cygpath
-
-
-# func_convert_core_msys_to_w32 ARG
-# Convert file name or path ARG from MSYS format to w32 format.  Return
-# result in func_convert_core_msys_to_w32_result.
-func_convert_core_msys_to_w32 ()
-{
-  $opt_debug
-  # awkward: cmd appends spaces to result
-  func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null |
-    $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"`
-}
-#end: func_convert_core_msys_to_w32
-
-
-# func_convert_file_check ARG1 ARG2
-# Verify that ARG1 (a file name in $build format) was converted to $host
-# format in ARG2. Otherwise, emit an error message, but continue (resetting
-# func_to_host_file_result to ARG1).
-func_convert_file_check ()
-{
-  $opt_debug
-  if test -z "$2" && test -n "$1" ; then
-    func_error "Could not determine host file name corresponding to"
-    func_error "  \`$1'"
-    func_error "Continuing, but uninstalled executables may not work."
-    # Fallback:
-    func_to_host_file_result="$1"
-  fi
-}
-# end func_convert_file_check
-
-
-# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH
-# Verify that FROM_PATH (a path in $build format) was converted to $host
-# format in TO_PATH. Otherwise, emit an error message, but continue, resetting
-# func_to_host_file_result to a simplistic fallback value (see below).
-func_convert_path_check ()
-{
-  $opt_debug
-  if test -z "$4" && test -n "$3"; then
-    func_error "Could not determine the host path corresponding to"
-    func_error "  \`$3'"
-    func_error "Continuing, but uninstalled executables may not work."
-    # Fallback.  This is a deliberately simplistic "conversion" and
-    # should not be "improved".  See libtool.info.
-    if test "x$1" != "x$2"; then
-      lt_replace_pathsep_chars="s|$1|$2|g"
-      func_to_host_path_result=`echo "$3" |
-        $SED -e "$lt_replace_pathsep_chars"`
-    else
-      func_to_host_path_result="$3"
-    fi
-  fi
-}
-# end func_convert_path_check
-
-
-# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG
-# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT
-# and appending REPL if ORIG matches BACKPAT.
-func_convert_path_front_back_pathsep ()
-{
-  $opt_debug
-  case $4 in
-  $1 ) func_to_host_path_result="$3$func_to_host_path_result"
-    ;;
-  esac
-  case $4 in
-  $2 ) func_append func_to_host_path_result "$3"
-    ;;
-  esac
-}
-# end func_convert_path_front_back_pathsep
-
-
-##################################################
-# $build to $host FILE NAME CONVERSION FUNCTIONS #
-##################################################
-# invoked via `$to_host_file_cmd ARG'
-#
-# In each case, ARG is the path to be converted from $build to $host format.
-# Result will be available in $func_to_host_file_result.
-
-
-# func_to_host_file ARG
-# Converts the file name ARG from $build format to $host format. Return result
-# in func_to_host_file_result.
-func_to_host_file ()
-{
-  $opt_debug
-  $to_host_file_cmd "$1"
-}
-# end func_to_host_file
-
-
-# func_to_tool_file ARG LAZY
-# converts the file name ARG from $build format to toolchain format. Return
-# result in func_to_tool_file_result.  If the conversion in use is listed
-# in (the comma separated) LAZY, no conversion takes place.
-func_to_tool_file ()
-{
-  $opt_debug
-  case ,$2, in
-    *,"$to_tool_file_cmd",*)
-      func_to_tool_file_result=$1
-      ;;
-    *)
-      $to_tool_file_cmd "$1"
-      func_to_tool_file_result=$func_to_host_file_result
-      ;;
-  esac
-}
-# end func_to_tool_file
-
-
-# func_convert_file_noop ARG
-# Copy ARG to func_to_host_file_result.
-func_convert_file_noop ()
-{
-  func_to_host_file_result="$1"
-}
-# end func_convert_file_noop
-
-
-# func_convert_file_msys_to_w32 ARG
-# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic
-# conversion to w32 is not available inside the cwrapper.  Returns result in
-# func_to_host_file_result.
-func_convert_file_msys_to_w32 ()
-{
-  $opt_debug
-  func_to_host_file_result="$1"
-  if test -n "$1"; then
-    func_convert_core_msys_to_w32 "$1"
-    func_to_host_file_result="$func_convert_core_msys_to_w32_result"
-  fi
-  func_convert_file_check "$1" "$func_to_host_file_result"
-}
-# end func_convert_file_msys_to_w32
-
-
-# func_convert_file_cygwin_to_w32 ARG
-# Convert file name ARG from Cygwin to w32 format.  Returns result in
-# func_to_host_file_result.
-func_convert_file_cygwin_to_w32 ()
-{
-  $opt_debug
-  func_to_host_file_result="$1"
-  if test -n "$1"; then
-    # because $build is cygwin, we call "the" cygpath in $PATH; no need to use
-    # LT_CYGPATH in this case.
-    func_to_host_file_result=`cygpath -m "$1"`
-  fi
-  func_convert_file_check "$1" "$func_to_host_file_result"
-}
-# end func_convert_file_cygwin_to_w32
-
-
-# func_convert_file_nix_to_w32 ARG
-# Convert file name ARG from *nix to w32 format.  Requires a wine environment
-# and a working winepath. Returns result in func_to_host_file_result.
-func_convert_file_nix_to_w32 ()
-{
-  $opt_debug
-  func_to_host_file_result="$1"
-  if test -n "$1"; then
-    func_convert_core_file_wine_to_w32 "$1"
-    func_to_host_file_result="$func_convert_core_file_wine_to_w32_result"
-  fi
-  func_convert_file_check "$1" "$func_to_host_file_result"
-}
-# end func_convert_file_nix_to_w32
-
-
-# func_convert_file_msys_to_cygwin ARG
-# Convert file name ARG from MSYS to Cygwin format.  Requires LT_CYGPATH set.
-# Returns result in func_to_host_file_result.
-func_convert_file_msys_to_cygwin ()
-{
-  $opt_debug
-  func_to_host_file_result="$1"
-  if test -n "$1"; then
-    func_convert_core_msys_to_w32 "$1"
-    func_cygpath -u "$func_convert_core_msys_to_w32_result"
-    func_to_host_file_result="$func_cygpath_result"
-  fi
-  func_convert_file_check "$1" "$func_to_host_file_result"
-}
-# end func_convert_file_msys_to_cygwin
-
-
-# func_convert_file_nix_to_cygwin ARG
-# Convert file name ARG from *nix to Cygwin format.  Requires Cygwin installed
-# in a wine environment, working winepath, and LT_CYGPATH set.  Returns result
-# in func_to_host_file_result.
-func_convert_file_nix_to_cygwin ()
-{
-  $opt_debug
-  func_to_host_file_result="$1"
-  if test -n "$1"; then
-    # convert from *nix to w32, then use cygpath to convert from w32 to cygwin.
-    func_convert_core_file_wine_to_w32 "$1"
-    func_cygpath -u "$func_convert_core_file_wine_to_w32_result"
-    func_to_host_file_result="$func_cygpath_result"
-  fi
-  func_convert_file_check "$1" "$func_to_host_file_result"
-}
-# end func_convert_file_nix_to_cygwin
-
-
-#############################################
-# $build to $host PATH CONVERSION FUNCTIONS #
-#############################################
-# invoked via `$to_host_path_cmd ARG'
-#
-# In each case, ARG is the path to be converted from $build to $host format.
-# The result will be available in $func_to_host_path_result.
-#
-# Path separators are also converted from $build format to $host format.  If
-# ARG begins or ends with a path separator character, it is preserved (but
-# converted to $host format) on output.
-#
-# All path conversion functions are named using the following convention:
-#   file name conversion function    : func_convert_file_X_to_Y ()
-#   path conversion function         : func_convert_path_X_to_Y ()
-# where, for any given $build/$host combination the 'X_to_Y' value is the
-# same.  If conversion functions are added for new $build/$host combinations,
-# the two new functions must follow this pattern, or func_init_to_host_path_cmd
-# will break.
-
-
-# func_init_to_host_path_cmd
-# Ensures that function "pointer" variable $to_host_path_cmd is set to the
-# appropriate value, based on the value of $to_host_file_cmd.
-to_host_path_cmd=
-func_init_to_host_path_cmd ()
-{
-  $opt_debug
-  if test -z "$to_host_path_cmd"; then
-    func_stripname 'func_convert_file_' '' "$to_host_file_cmd"
-    to_host_path_cmd="func_convert_path_${func_stripname_result}"
-  fi
-}
-
-
-# func_to_host_path ARG
-# Converts the path ARG from $build format to $host format. Return result
-# in func_to_host_path_result.
-func_to_host_path ()
-{
-  $opt_debug
-  func_init_to_host_path_cmd
-  $to_host_path_cmd "$1"
-}
-# end func_to_host_path
-
-
-# func_convert_path_noop ARG
-# Copy ARG to func_to_host_path_result.
-func_convert_path_noop ()
-{
-  func_to_host_path_result="$1"
-}
-# end func_convert_path_noop
-
-
-# func_convert_path_msys_to_w32 ARG
-# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic
-# conversion to w32 is not available inside the cwrapper.  Returns result in
-# func_to_host_path_result.
-func_convert_path_msys_to_w32 ()
-{
-  $opt_debug
-  func_to_host_path_result="$1"
-  if test -n "$1"; then
-    # Remove leading and trailing path separator characters from ARG.  MSYS
-    # behavior is inconsistent here; cygpath turns them into '.;' and ';.';
-    # and winepath ignores them completely.
-    func_stripname : : "$1"
-    func_to_host_path_tmp1=$func_stripname_result
-    func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
-    func_to_host_path_result="$func_convert_core_msys_to_w32_result"
-    func_convert_path_check : ";" \
-      "$func_to_host_path_tmp1" "$func_to_host_path_result"
-    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
-  fi
-}
-# end func_convert_path_msys_to_w32
-
-
-# func_convert_path_cygwin_to_w32 ARG
-# Convert path ARG from Cygwin to w32 format.  Returns result in
-# func_to_host_file_result.
-func_convert_path_cygwin_to_w32 ()
-{
-  $opt_debug
-  func_to_host_path_result="$1"
-  if test -n "$1"; then
-    # See func_convert_path_msys_to_w32:
-    func_stripname : : "$1"
-    func_to_host_path_tmp1=$func_stripname_result
-    func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"`
-    func_convert_path_check : ";" \
-      "$func_to_host_path_tmp1" "$func_to_host_path_result"
-    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
-  fi
-}
-# end func_convert_path_cygwin_to_w32
-
-
-# func_convert_path_nix_to_w32 ARG
-# Convert path ARG from *nix to w32 format.  Requires a wine environment and
-# a working winepath.  Returns result in func_to_host_file_result.
-func_convert_path_nix_to_w32 ()
-{
-  $opt_debug
-  func_to_host_path_result="$1"
-  if test -n "$1"; then
-    # See func_convert_path_msys_to_w32:
-    func_stripname : : "$1"
-    func_to_host_path_tmp1=$func_stripname_result
-    func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
-    func_to_host_path_result="$func_convert_core_path_wine_to_w32_result"
-    func_convert_path_check : ";" \
-      "$func_to_host_path_tmp1" "$func_to_host_path_result"
-    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
-  fi
-}
-# end func_convert_path_nix_to_w32
-
-
-# func_convert_path_msys_to_cygwin ARG
-# Convert path ARG from MSYS to Cygwin format.  Requires LT_CYGPATH set.
-# Returns result in func_to_host_file_result.
-func_convert_path_msys_to_cygwin ()
-{
-  $opt_debug
-  func_to_host_path_result="$1"
-  if test -n "$1"; then
-    # See func_convert_path_msys_to_w32:
-    func_stripname : : "$1"
-    func_to_host_path_tmp1=$func_stripname_result
-    func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
-    func_cygpath -u -p "$func_convert_core_msys_to_w32_result"
-    func_to_host_path_result="$func_cygpath_result"
-    func_convert_path_check : : \
-      "$func_to_host_path_tmp1" "$func_to_host_path_result"
-    func_convert_path_front_back_pathsep ":*" "*:" : "$1"
-  fi
-}
-# end func_convert_path_msys_to_cygwin
-
-
-# func_convert_path_nix_to_cygwin ARG
-# Convert path ARG from *nix to Cygwin format.  Requires Cygwin installed in a
-# a wine environment, working winepath, and LT_CYGPATH set.  Returns result in
-# func_to_host_file_result.
-func_convert_path_nix_to_cygwin ()
-{
-  $opt_debug
-  func_to_host_path_result="$1"
-  if test -n "$1"; then
-    # Remove leading and trailing path separator characters from
-    # ARG. msys behavior is inconsistent here, cygpath turns them
-    # into '.;' and ';.', and winepath ignores them completely.
-    func_stripname : : "$1"
-    func_to_host_path_tmp1=$func_stripname_result
-    func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
-    func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result"
-    func_to_host_path_result="$func_cygpath_result"
-    func_convert_path_check : : \
-      "$func_to_host_path_tmp1" "$func_to_host_path_result"
-    func_convert_path_front_back_pathsep ":*" "*:" : "$1"
-  fi
-}
-# end func_convert_path_nix_to_cygwin
-
-
 # func_mode_compile arg...
 func_mode_compile ()
 {
@@ -1985,12 +1137,12 @@ func_mode_compile ()
           ;;
 
         -pie | -fpie | -fPIE)
-          func_append pie_flag " $arg"
+          pie_flag="$pie_flag $arg"
           continue
           ;;
 
         -shared | -static | -prefer-pic | -prefer-non-pic)
-          func_append later " $arg"
+          later="$later $arg"
           continue
           ;;
 
@@ -2011,14 +1163,15 @@ func_mode_compile ()
           save_ifs="$IFS"; IFS=','
           for arg in $args; do
             IFS="$save_ifs"
-            func_append_quoted lastarg "$arg"
+            func_quote_for_eval "$arg"
+            lastarg="$lastarg $func_quote_for_eval_result"
           done
           IFS="$save_ifs"
           func_stripname ' ' '' "$lastarg"
           lastarg=$func_stripname_result
 
           # Add the arguments to base_compile.
-          func_append base_compile " $lastarg"
+          base_compile="$base_compile $lastarg"
           continue
           ;;
 
@@ -2034,7 +1187,8 @@ func_mode_compile ()
       esac    #  case $arg_mode
 
       # Aesthetically quote the previous argument.
-      func_append_quoted base_compile "$lastarg"
+      func_quote_for_eval "$lastarg"
+      base_compile="$base_compile $func_quote_for_eval_result"
     done # for arg
 
     case $arg_mode in
@@ -2059,7 +1213,7 @@ func_mode_compile ()
     *.[cCFSifmso] | \
     *.ada | *.adb | *.ads | *.asm | \
     *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
-    *.[fF][09]? | *.for | *.java | *.obj | *.sx | *.cu | *.cup)
+    *.[fF][09]? | *.for | *.java | *.obj | *.sx)
       func_xform "$libobj"
       libobj=$func_xform_result
       ;;
@@ -2134,7 +1288,7 @@ func_mode_compile ()
     # Calculate the filename of the output object if compiler does
     # not support -o with -c
     if test "$compiler_c_o" = no; then
-      output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext}
+      output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
       lockfile="$output_obj.lock"
     else
       output_obj=
@@ -2165,16 +1319,17 @@ compiler."
         $opt_dry_run || $RM $removelist
         exit $EXIT_FAILURE
       fi
-      func_append removelist " $output_obj"
+      removelist="$removelist $output_obj"
       $ECHO "$srcfile" > "$lockfile"
     fi
 
     $opt_dry_run || $RM $removelist
-    func_append removelist " $lockfile"
+    removelist="$removelist $lockfile"
     trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
 
-    func_to_tool_file "$srcfile" func_convert_file_msys_to_w32
-    srcfile=$func_to_tool_file_result
+    if test -n "$fix_srcfile_path"; then
+      eval srcfile=\"$fix_srcfile_path\"
+    fi
     func_quote_for_eval "$srcfile"
     qsrcfile=$func_quote_for_eval_result
 
@@ -2194,7 +1349,7 @@ compiler."
 
       if test -z "$output_obj"; then
         # Place PIC objects in $objdir
-        func_append command " -o $lobj"
+        command="$command -o $lobj"
       fi
 
       func_show_eval_locale "$command"  \
@@ -2241,11 +1396,11 @@ compiler."
         command="$base_compile $qsrcfile $pic_flag"
       fi
       if test "$compiler_c_o" = yes; then
-        func_append command " -o $obj"
+        command="$command -o $obj"
       fi
 
       # Suppress compiler output if we already did a PIC compilation.
-      func_append command "$suppress_output"
+      command="$command$suppress_output"
       func_show_eval_locale "$command" \
         '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
 
@@ -2290,13 +1445,13 @@ compiler."
 }
 
 $opt_help || {
-  test "$opt_mode" = compile && func_mode_compile ${1+"$@"}
+test "$mode" = compile && func_mode_compile ${1+"$@"}
 }
 
 func_mode_help ()
 {
     # We need to display help for each of the modes.
-    case $opt_mode in
+    case $mode in
       "")
         # Generic help is extracted from the usage comments
         # at the start of this file.
@@ -2327,11 +1482,10 @@ This mode accepts the following additional options:
 
   -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
   -no-suppress      do not suppress compiler output for multiple passes
-  -prefer-pic       try to build PIC objects only
-  -prefer-non-pic   try to build non-PIC objects only
+  -prefer-pic       try to building PIC objects only
+  -prefer-non-pic   try to building non-PIC objects only
   -shared           do not build a \`.o' file suitable for static linking
   -static           only build a \`.o' file suitable for static linking
-  -Wc,FLAG          pass FLAG directly to the compiler
 
 COMPILE-COMMAND is a command to be used in creating a \`standard' object file
 from the given SOURCEFILE.
@@ -2384,7 +1538,7 @@ either the \`install' or \`cp' program.
 
 The following components of INSTALL-COMMAND are treated specially:
 
-  -inst-prefix-dir PREFIX-DIR  Use PREFIX-DIR as a staging area for installation
+  -inst-prefix PREFIX-DIR  Use PREFIX-DIR as a staging area for installation
 
 The rest of the components are interpreted as arguments to that command (only
 BSD-compatible install options are recognized)."
@@ -2404,8 +1558,6 @@ The following components of LINK-COMMAND are treated specially:
 
   -all-static       do not do any dynamic linking at all
   -avoid-version    do not add a version suffix if possible
-  -bindir BINDIR    specify path to binaries directory (for systems where
-                    libraries must be found in the PATH setting at runtime)
   -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
   -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
   -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
@@ -2434,11 +1586,6 @@ The following components of LINK-COMMAND are treated specially:
   -version-info CURRENT[:REVISION[:AGE]]
                     specify library version info [each variable defaults to 0]
   -weak LIBNAME     declare that the target provides the LIBNAME interface
-  -Wc,FLAG
-  -Xcompiler FLAG   pass linker-specific FLAG directly to the compiler
-  -Wl,FLAG
-  -Xlinker FLAG     pass linker-specific FLAG directly to the linker
-  -XCClinker FLAG   pass link-specific FLAG to the compiler driver (CC)
 
 All other options (arguments beginning with \`-') are ignored.
 
@@ -2472,44 +1619,18 @@ Otherwise, only FILE itself is deleted using RM."
         ;;
 
       *)
-        func_fatal_help "invalid operation mode \`$opt_mode'"
+        func_fatal_help "invalid operation mode \`$mode'"
         ;;
     esac
 
-    echo
+    $ECHO
     $ECHO "Try \`$progname --help' for more information about other modes."
+
+    exit $?
 }
 
-# Now that we've collected a possible --mode arg, show help if necessary
-if $opt_help; then
-  if test "$opt_help" = :; then
-    func_mode_help
-  else
-    {
-      func_help noexit
-      for opt_mode in compile link execute install finish uninstall clean; do
-        func_mode_help
-      done
-    } | sed -n '1p; 2,$s/^Usage:/  or: /p'
-    {
-      func_help noexit
-      for opt_mode in compile link execute install finish uninstall clean; do
-        echo
-        func_mode_help
-      done
-    } |
-    sed '1d
-      /^When reporting/,/^Report/{
-        H
-        d
-      }
-      $x
-      /information about other modes/d
-      /more detailed .*MODE/d
-      s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/'
-  fi
-  exit $?
-fi
+  # Now that we've collected a possible --mode arg, show help if necessary
+  $opt_help && func_mode_help
 
 
 # func_mode_execute arg...
@@ -2522,16 +1643,13 @@ func_mode_execute ()
       func_fatal_help "you must specify a COMMAND"
 
     # Handle -dlopen flags immediately.
-    for file in $opt_dlopen; do
+    for file in $execute_dlfiles; do
       test -f "$file" \
         || func_fatal_help "\`$file' is not a file"
 
       dir=
       case $file in
       *.la)
-        func_resolve_sysroot "$file"
-        file=$func_resolve_sysroot_result
-
         # Check to see that this really is a libtool archive.
         func_lalib_unsafe_p "$file" \
           || func_fatal_help "\`$lib' is not a valid libtool archive"
@@ -2553,7 +1671,7 @@ func_mode_execute ()
         dir="$func_dirname_result"
 
         if test -f "$dir/$objdir/$dlname"; then
-          func_append dir "/$objdir"
+          dir="$dir/$objdir"
         else
           if test ! -f "$dir/$dlname"; then
             func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
@@ -2594,7 +1712,7 @@ func_mode_execute ()
     for file
     do
       case $file in
-      -* | *.la | *.lo ) ;;
+      -*) ;;
       *)
         # Do a test to see if this is really a libtool program.
         if func_ltwrapper_script_p "$file"; then
@@ -2610,7 +1728,8 @@ func_mode_execute ()
         ;;
       esac
       # Quote arguments (to preserve shell metacharacters).
-      func_append_quoted args "$file"
+      func_quote_for_eval "$file"
+      args="$args $func_quote_for_eval_result"
     done
 
     if test "X$opt_dry_run" = Xfalse; then
@@ -2635,66 +1754,29 @@ func_mode_execute ()
       # Display what would be done.
       if test -n "$shlibpath_var"; then
         eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
-        echo "export $shlibpath_var"
+        $ECHO "export $shlibpath_var"
       fi
       $ECHO "$cmd$args"
       exit $EXIT_SUCCESS
     fi
 }
 
-test "$opt_mode" = execute && func_mode_execute ${1+"$@"}
+test "$mode" = execute && func_mode_execute ${1+"$@"}
 
 
 # func_mode_finish arg...
 func_mode_finish ()
 {
     $opt_debug
-    libs=
-    libdirs=
+    libdirs="$nonopt"
     admincmds=
 
-    for opt in "$nonopt" ${1+"$@"}
-    do
-      if test -d "$opt"; then
-        func_append libdirs " $opt"
-
-      elif test -f "$opt"; then
-        if func_lalib_unsafe_p "$opt"; then
-          func_append libs " $opt"
-        else
-          func_warning "\`$opt' is not a valid libtool archive"
-        fi
-
-      else
-        func_fatal_error "invalid argument \`$opt'"
-      fi
-    done
-
-    if test -n "$libs"; then
-      if test -n "$lt_sysroot"; then
-        sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"`
-        sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;"
-      else
-        sysroot_cmd=
-      fi
-
-      # Remove sysroot references
-      if $opt_dry_run; then
-        for lib in $libs; do
-          echo "removing references to $lt_sysroot and \`=' prefixes from $lib"
-        done
-      else
-        tmpdir=`func_mktempdir`
-        for lib in $libs; do
-          sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
-            > $tmpdir/tmp-la
-          mv -f $tmpdir/tmp-la $lib
-        done
-        ${RM}r "$tmpdir"
-      fi
-    fi
-
     if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+      for dir
+      do
+        libdirs="$libdirs $dir"
+      done
+
       for libdir in $libdirs; do
         if test -n "$finish_cmds"; then
           # Do each command in the finish commands.
@@ -2704,7 +1786,7 @@ func_mode_finish ()
         if test -n "$finish_eval"; then
           # Do the single finish_eval.
           eval cmds=\"$finish_eval\"
-          $opt_dry_run || eval "$cmds" || func_append admincmds "
+          $opt_dry_run || eval "$cmds" || admincmds="$admincmds
        $cmds"
         fi
       done
@@ -2713,55 +1795,53 @@ func_mode_finish ()
     # Exit here if they wanted silent mode.
     $opt_silent && exit $EXIT_SUCCESS
 
-    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
-      echo "----------------------------------------------------------------------"
-      echo "Libraries have been installed in:"
-      for libdir in $libdirs; do
-        $ECHO "   $libdir"
-      done
-      echo
-      echo "If you ever happen to want to link against installed libraries"
-      echo "in a given directory, LIBDIR, you must either use libtool, and"
-      echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
-      echo "flag during linking and do at least one of the following:"
-      if test -n "$shlibpath_var"; then
-        echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
-        echo "     during execution"
-      fi
-      if test -n "$runpath_var"; then
-        echo "   - add LIBDIR to the \`$runpath_var' environment variable"
-        echo "     during linking"
-      fi
-      if test -n "$hardcode_libdir_flag_spec"; then
-        libdir=LIBDIR
-        eval flag=\"$hardcode_libdir_flag_spec\"
-
-        $ECHO "   - use the \`$flag' linker flag"
-      fi
-      if test -n "$admincmds"; then
-        $ECHO "   - have your system administrator run these commands:$admincmds"
-      fi
-      if test -f /etc/ld.so.conf; then
-        echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
-      fi
-      echo
+    $ECHO "X----------------------------------------------------------------------" | $Xsed
+    $ECHO "Libraries have been installed in:"
+    for libdir in $libdirs; do
+      $ECHO "   $libdir"
+    done
+    $ECHO
+    $ECHO "If you ever happen to want to link against installed libraries"
+    $ECHO "in a given directory, LIBDIR, you must either use libtool, and"
+    $ECHO "specify the full pathname of the library, or use the \`-LLIBDIR'"
+    $ECHO "flag during linking and do at least one of the following:"
+    if test -n "$shlibpath_var"; then
+      $ECHO "   - add LIBDIR to the \`$shlibpath_var' environment variable"
+      $ECHO "     during execution"
+    fi
+    if test -n "$runpath_var"; then
+      $ECHO "   - add LIBDIR to the \`$runpath_var' environment variable"
+      $ECHO "     during linking"
+    fi
+    if test -n "$hardcode_libdir_flag_spec"; then
+      libdir=LIBDIR
+      eval flag=\"$hardcode_libdir_flag_spec\"
 
-      echo "See any operating system documentation about shared libraries for"
-      case $host in
-        solaris2.[6789]|solaris2.1[0-9])
-          echo "more information, such as the ld(1), crle(1) and ld.so(8) manual"
-          echo "pages."
-          ;;
-        *)
-          echo "more information, such as the ld(1) and ld.so(8) manual pages."
-          ;;
-      esac
-      echo "----------------------------------------------------------------------"
+      $ECHO "   - use the \`$flag' linker flag"
     fi
+    if test -n "$admincmds"; then
+      $ECHO "   - have your system administrator run these commands:$admincmds"
+    fi
+    if test -f /etc/ld.so.conf; then
+      $ECHO "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+    fi
+    $ECHO
+
+    $ECHO "See any operating system documentation about shared libraries for"
+    case $host in
+      solaris2.[6789]|solaris2.1[0-9])
+        $ECHO "more information, such as the ld(1), crle(1) and ld.so(8) manual"
+        $ECHO "pages."
+        ;;
+      *)
+        $ECHO "more information, such as the ld(1) and ld.so(8) manual pages."
+        ;;
+    esac
+    $ECHO "X----------------------------------------------------------------------" | $Xsed
     exit $EXIT_SUCCESS
 }
 
-test "$opt_mode" = finish && func_mode_finish ${1+"$@"}
+test "$mode" = finish && func_mode_finish ${1+"$@"}
 
 
 # func_mode_install arg...
@@ -2772,7 +1852,7 @@ func_mode_install ()
     # install_prog (especially on Windows NT).
     if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
        # Allow the use of GNU shtool's install command.
-       case $nonopt in *shtool*) :;; *) false;; esac; then
+       $ECHO "X$nonopt" | $GREP shtool >/dev/null; then
       # Aesthetically quote it.
       func_quote_for_eval "$nonopt"
       install_prog="$func_quote_for_eval_result "
@@ -2786,12 +1866,7 @@ func_mode_install ()
     # The real first argument should be the name of the installation program.
     # Aesthetically quote it.
     func_quote_for_eval "$arg"
-    func_append install_prog "$func_quote_for_eval_result"
-    install_shared_prog=$install_prog
-    case " $install_prog " in
-      *[\\\ /]cp\ *) install_cp=: ;;
-      *) install_cp=false ;;
-    esac
+    install_prog="$install_prog$func_quote_for_eval_result"
 
     # We need to accept at least all the BSD install flags.
     dest=
@@ -2801,12 +1876,10 @@ func_mode_install ()
     install_type=
     isdir=no
     stripme=
-    no_mode=:
     for arg
     do
-      arg2=
       if test -n "$dest"; then
-        func_append files " $dest"
+        files="$files $dest"
         dest=$arg
         continue
       fi
@@ -2814,9 +1887,10 @@ func_mode_install ()
       case $arg in
       -d) isdir=yes ;;
       -f)
-        if $install_cp; then :; else
-          prev=$arg
-        fi
+        case " $install_prog " in
+        *[\\\ /]cp\ *) ;;
+        *) prev=$arg ;;
+        esac
         ;;
       -g | -m | -o)
         prev=$arg
@@ -2830,10 +1904,6 @@ func_mode_install ()
       *)
         # If the previous option needed an argument, then skip it.
         if test -n "$prev"; then
-          if test "x$prev" = x-m && test -n "$install_override_mode"; then
-            arg2=$install_override_mode
-            no_mode=false
-          fi
           prev=
         else
           dest=$arg
@@ -2844,11 +1914,7 @@ func_mode_install ()
 
       # Aesthetically quote the argument.
       func_quote_for_eval "$arg"
-      func_append install_prog " $func_quote_for_eval_result"
-      if test -n "$arg2"; then
-        func_quote_for_eval "$arg2"
-      fi
-      func_append install_shared_prog " $func_quote_for_eval_result"
+      install_prog="$install_prog $func_quote_for_eval_result"
     done
 
     test -z "$install_prog" && \
@@ -2857,13 +1923,6 @@ func_mode_install ()
     test -n "$prev" && \
       func_fatal_help "the \`$prev' option requires an argument"
 
-    if test -n "$install_override_mode" && $no_mode; then
-      if $install_cp; then :; else
-        func_quote_for_eval "$install_override_mode"
-        func_append install_shared_prog " -m $func_quote_for_eval_result"
-      fi
-    fi
-
     if test -z "$files"; then
       if test -z "$dest"; then
         func_fatal_help "no file or destination specified"
@@ -2918,13 +1977,10 @@ func_mode_install ()
       case $file in
       *.$libext)
         # Do the static libraries later.
-        func_append staticlibs " $file"
+        staticlibs="$staticlibs $file"
         ;;
 
       *.la)
-        func_resolve_sysroot "$file"
-        file=$func_resolve_sysroot_result
-
         # Check to see that this really is a libtool archive.
         func_lalib_unsafe_p "$file" \
           || func_fatal_help "\`$file' is not a valid libtool archive"
@@ -2938,23 +1994,23 @@ func_mode_install ()
         if test "X$destdir" = "X$libdir"; then
           case "$current_libdirs " in
           *" $libdir "*) ;;
-          *) func_append current_libdirs " $libdir" ;;
+          *) current_libdirs="$current_libdirs $libdir" ;;
           esac
         else
           # Note the libdir as a future libdir.
           case "$future_libdirs " in
           *" $libdir "*) ;;
-          *) func_append future_libdirs " $libdir" ;;
+          *) future_libdirs="$future_libdirs $libdir" ;;
           esac
         fi
 
         func_dirname "$file" "/" ""
         dir="$func_dirname_result"
-        func_append dir "$objdir"
+        dir="$dir$objdir"
 
         if test -n "$relink_command"; then
           # Determine the prefix the user has applied to our future dir.
-          inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"`
+          inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"`
 
           # Don't allow the user to place us outside of our expected
           # location b/c this prevents finding dependent libraries that
@@ -2967,9 +2023,9 @@ func_mode_install ()
 
           if test -n "$inst_prefix_dir"; then
             # Stick the inst_prefix_dir data into the link command.
-            relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
+            relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
           else
-            relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
+            relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"`
           fi
 
           func_warning "relinking \`$file'"
@@ -2987,7 +2043,7 @@ func_mode_install ()
           test -n "$relink_command" && srcname="$realname"T
 
           # Install the shared library and build the symlinks.
-          func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \
+          func_show_eval "$install_prog $dir/$srcname $destdir/$realname" \
               'exit $?'
           tstripme="$stripme"
           case $host_os in
@@ -3027,7 +2083,7 @@ func_mode_install ()
         func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
 
         # Maybe install the static library, too.
-        test -n "$old_library" && func_append staticlibs " $dir/$old_library"
+        test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
         ;;
 
       *.lo)
@@ -3127,7 +2183,7 @@ func_mode_install ()
             if test -f "$lib"; then
               func_source "$lib"
             fi
-            libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test
+            libfile="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
             if test -n "$libdir" && test ! -f "$libfile"; then
               func_warning "\`$lib' has not been installed in \`$libdir'"
               finalize=no
@@ -3146,7 +2202,7 @@ func_mode_install ()
                 file="$func_basename_result"
                 outputname="$tmpdir/$file"
                 # Replace the output file specification.
-                relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'`
+                relink_command=`$ECHO "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
 
                 $opt_silent || {
                   func_quote_for_expand "$relink_command"
@@ -3165,7 +2221,7 @@ func_mode_install ()
             }
           else
             # Install the binary that we compiled earlier.
-            file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"`
+            file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
           fi
         fi
 
@@ -3224,7 +2280,7 @@ func_mode_install ()
     fi
 }
 
-test "$opt_mode" = install && func_mode_install ${1+"$@"}
+test "$mode" = install && func_mode_install ${1+"$@"}
 
 
 # func_generate_dlsyms outputname originator pic_p
@@ -3267,22 +2323,6 @@ func_generate_dlsyms ()
 extern \"C\" {
 #endif
 
-#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
-#pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
-#endif
-
-/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
-#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
-/* DATA imports from DLLs on WIN32 con't be const, because runtime
-   relocations are performed -- see ld's documentation on pseudo-relocs.  */
-# define LT_DLSYM_CONST
-#elif defined(__osf__)
-/* This system does not cope well with relocations in const data.  */
-# define LT_DLSYM_CONST
-#else
-# define LT_DLSYM_CONST const
-#endif
-
 /* External symbol declarations for the compiler. */\
 "
 
@@ -3292,11 +2332,10 @@ extern \"C\" {
           $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
 
           # Add our own program objects to the symbol list.
-          progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`
+          progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
           for progfile in $progfiles; do
-            func_to_tool_file "$progfile" func_convert_file_msys_to_w32
-            func_verbose "extracting global C symbols from \`$func_to_tool_file_result'"
-            $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'"
+            func_verbose "extracting global C symbols from \`$progfile'"
+            $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'"
           done
 
           if test -n "$exclude_expsyms"; then
@@ -3332,7 +2371,7 @@ extern \"C\" {
               eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
               eval '$MV "$nlist"T "$nlist"'
               case $host in
-                *cygwin* | *mingw* | *cegcc* )
+                *cygwin | *mingw* | *cegcc* )
                   eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
                   eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
                   ;;
@@ -3345,52 +2384,10 @@ extern \"C\" {
           func_verbose "extracting global C symbols from \`$dlprefile'"
           func_basename "$dlprefile"
           name="$func_basename_result"
-          case $host in
-            *cygwin* | *mingw* | *cegcc* )
-              # if an import library, we need to obtain dlname
-              if func_win32_import_lib_p "$dlprefile"; then
-                func_tr_sh "$dlprefile"
-                eval "curr_lafile=\$libfile_$func_tr_sh_result"
-                dlprefile_dlbasename=""
-                if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then
-                  # Use subshell, to avoid clobbering current variable values
-                  dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"`
-                  if test -n "$dlprefile_dlname" ; then
-                    func_basename "$dlprefile_dlname"
-                    dlprefile_dlbasename="$func_basename_result"
-                  else
-                    # no lafile. user explicitly requested -dlpreopen <import library>.
-                    $sharedlib_from_linklib_cmd "$dlprefile"
-                    dlprefile_dlbasename=$sharedlib_from_linklib_result
-                  fi
-                fi
-                $opt_dry_run || {
-                  if test -n "$dlprefile_dlbasename" ; then
-                    eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"'
-                  else
-                    func_warning "Could not compute DLL name from $name"
-                    eval '$ECHO ": $name " >> "$nlist"'
-                  fi
-                  func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
-                  eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe |
-                    $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'"
-                }
-              else # not an import lib
-                $opt_dry_run || {
-                  eval '$ECHO ": $name " >> "$nlist"'
-                  func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
-                  eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
-                }
-              fi
-            ;;
-            *)
-              $opt_dry_run || {
-                eval '$ECHO ": $name " >> "$nlist"'
-                func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
-                eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
-              }
-            ;;
-          esac
+          $opt_dry_run || {
+            eval '$ECHO ": $name " >> "$nlist"'
+            eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+          }
         done
 
         $opt_dry_run || {
@@ -3418,19 +2415,36 @@ extern \"C\" {
           if test -f "$nlist"S; then
             eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
           else
-            echo '/* NONE */' >> "$output_objdir/$my_dlsyms"
+            $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms"
           fi
 
-          echo >> "$output_objdir/$my_dlsyms" "\
+          $ECHO >> "$output_objdir/$my_dlsyms" "\
 
 /* The mapping between symbol names and symbols.  */
 typedef struct {
   const char *name;
   void *address;
 } lt_dlsymlist;
-extern LT_DLSYM_CONST lt_dlsymlist
+"
+          case $host in
+          *cygwin* | *mingw* | *cegcc* )
+            $ECHO >> "$output_objdir/$my_dlsyms" "\
+/* DATA imports from DLLs on WIN32 con't be const, because
+   runtime relocations are performed -- see ld's documentation
+   on pseudo-relocs.  */"
+            lt_dlsym_const= ;;
+          *osf5*)
+            echo >> "$output_objdir/$my_dlsyms" "\
+/* This system does not cope well with relocations in const data */"
+            lt_dlsym_const= ;;
+          *)
+            lt_dlsym_const=const ;;
+          esac
+
+          $ECHO >> "$output_objdir/$my_dlsyms" "\
+extern $lt_dlsym_const lt_dlsymlist
 lt_${my_prefix}_LTX_preloaded_symbols[];
-LT_DLSYM_CONST lt_dlsymlist
+$lt_dlsym_const lt_dlsymlist
 lt_${my_prefix}_LTX_preloaded_symbols[] =
 {\
   { \"$my_originator\", (void *) 0 },"
@@ -3443,7 +2457,7 @@ lt_${my_prefix}_LTX_preloaded_symbols[] =
             eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
             ;;
           esac
-          echo >> "$output_objdir/$my_dlsyms" "\
+          $ECHO >> "$output_objdir/$my_dlsyms" "\
   {0, (void *) 0}
 };
 
@@ -3486,7 +2500,7 @@ static const void *lt_preloaded_setup() {
         for arg in $LTCFLAGS; do
           case $arg in
           -pie | -fpie | -fPIE) ;;
-          *) func_append symtab_cflags " $arg" ;;
+          *) symtab_cflags="$symtab_cflags $arg" ;;
           esac
         done
 
@@ -3501,16 +2515,16 @@ static const void *lt_preloaded_setup() {
         case $host in
         *cygwin* | *mingw* | *cegcc* )
           if test -f "$output_objdir/$my_outputname.def"; then
-            compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
-            finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+            compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+            finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
           else
-            compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
-            finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+            compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+            finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
           fi
           ;;
         *)
-          compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
-          finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+          compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+          finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
           ;;
         esac
         ;;
@@ -3524,8 +2538,8 @@ static const void *lt_preloaded_setup() {
       # really was required.
 
       # Nullify the symbol file.
-      compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"`
-      finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"`
+      compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
+      finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
     fi
 }
 
@@ -3535,7 +2549,6 @@ static const void *lt_preloaded_setup() {
 # Need a lot of goo to handle *both* DLLs and import libs
 # Has to be a shell function in order to 'eat' the argument
 # that is supplied when $file_magic_command is called.
-# Despite the name, also deal with 64 bit binaries.
 func_win32_libid ()
 {
   $opt_debug
@@ -3546,11 +2559,9 @@ func_win32_libid ()
     win32_libid_type="x86 archive import"
     ;;
   *ar\ archive*) # could be an import, or static
-    # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.
     if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
-       $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
-      func_to_tool_file "$1" func_convert_file_msys_to_w32
-      win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
+       $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
+      win32_nmres=`eval $NM -f posix -A $1 |
         $SED -n -e '
             1,100{
                 / I /{
@@ -3579,131 +2590,6 @@ func_win32_libid ()
   $ECHO "$win32_libid_type"
 }
 
-# func_cygming_dll_for_implib ARG
-#
-# Platform-specific function to extract the
-# name of the DLL associated with the specified
-# import library ARG.
-# Invoked by eval'ing the libtool variable
-#    $sharedlib_from_linklib_cmd
-# Result is available in the variable
-#    $sharedlib_from_linklib_result
-func_cygming_dll_for_implib ()
-{
-  $opt_debug
-  sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"`
-}
-
-# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs
-#
-# The is the core of a fallback implementation of a
-# platform-specific function to extract the name of the
-# DLL associated with the specified import library LIBNAME.
-#
-# SECTION_NAME is either .idata$6 or .idata$7, depending
-# on the platform and compiler that created the implib.
-#
-# Echos the name of the DLL associated with the
-# specified import library.
-func_cygming_dll_for_implib_fallback_core ()
-{
-  $opt_debug
-  match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"`
-  $OBJDUMP -s --section "$1" "$2" 2>/dev/null |
-    $SED '/^Contents of section '"$match_literal"':/{
-      # Place marker at beginning of archive member dllname section
-      s/.*/====MARK====/
-      p
-      d
-    }
-    # These lines can sometimes be longer than 43 characters, but
-    # are always uninteresting
-    /:[  ]*file format pe[i]\{,1\}-/d
-    /^In archive [^:]*:/d
-    # Ensure marker is printed
-    /^====MARK====/p
-    # Remove all lines with less than 43 characters
-    /^.\{43\}/!d
-    # From remaining lines, remove first 43 characters
-    s/^.\{43\}//' |
-    $SED -n '
-      # Join marker and all lines until next marker into a single line
-      /^====MARK====/ b para
-      H
-      $ b para
-      b
-      :para
-      x
-      s/\n//g
-      # Remove the marker
-      s/^====MARK====//
-      # Remove trailing dots and whitespace
-      s/[\. \t]*$//
-      # Print
-      /./p' |
-    # we now have a list, one entry per line, of the stringified
-    # contents of the appropriate section of all members of the
-    # archive which possess that section. Heuristic: eliminate
-    # all those which have a first or second character that is
-    # a '.' (that is, objdump's representation of an unprintable
-    # character.) This should work for all archives with less than
-    # 0x302f exports -- but will fail for DLLs whose name actually
-    # begins with a literal '.' or a single character followed by
-    # a '.'.
-    #
-    # Of those that remain, print the first one.
-    $SED -e '/^\./d;/^.\./d;q'
-}
-
-# func_cygming_gnu_implib_p ARG
-# This predicate returns with zero status (TRUE) if
-# ARG is a GNU/binutils-style import library. Returns
-# with nonzero status (FALSE) otherwise.
-func_cygming_gnu_implib_p ()
-{
-  $opt_debug
-  func_to_tool_file "$1" func_convert_file_msys_to_w32
-  func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
-  test -n "$func_cygming_gnu_implib_tmp"
-}
-
-# func_cygming_ms_implib_p ARG
-# This predicate returns with zero status (TRUE) if
-# ARG is an MS-style import library. Returns
-# with nonzero status (FALSE) otherwise.
-func_cygming_ms_implib_p ()
-{
-  $opt_debug
-  func_to_tool_file "$1" func_convert_file_msys_to_w32
-  func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
-  test -n "$func_cygming_ms_implib_tmp"
-}
-
-# func_cygming_dll_for_implib_fallback ARG
-# Platform-specific function to extract the
-# name of the DLL associated with the specified
-# import library ARG.
-#
-# This fallback implementation is for use when $DLLTOOL
-# does not support the --identify-strict option.
-# Invoked by eval'ing the libtool variable
-#    $sharedlib_from_linklib_cmd
-# Result is available in the variable
-#    $sharedlib_from_linklib_result
-func_cygming_dll_for_implib_fallback ()
-{
-  $opt_debug
-  if func_cygming_gnu_implib_p "$1" ; then
-    # binutils import library
-    sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"`
-  elif func_cygming_ms_implib_p "$1" ; then
-    # ms-generated import library
-    sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"`
-  else
-    # unknown
-    sharedlib_from_linklib_result=""
-  fi
-}
 
 
 # func_extract_an_archive dir oldlib
@@ -3712,18 +2598,7 @@ func_extract_an_archive ()
     $opt_debug
     f_ex_an_ar_dir="$1"; shift
     f_ex_an_ar_oldlib="$1"
-    if test "$lock_old_archive_extraction" = yes; then
-      lockfile=$f_ex_an_ar_oldlib.lock
-      until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
-        func_echo "Waiting for $lockfile to be removed"
-        sleep 2
-      done
-    fi
-    func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \
-                   'stat=$?; rm -f "$lockfile"; exit $stat'
-    if test "$lock_old_archive_extraction" = yes; then
-      $opt_dry_run || rm -f "$lockfile"
-    fi
+    func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?'
     if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
      :
     else
@@ -3794,7 +2669,7 @@ func_extract_archives ()
             darwin_file=
             darwin_files=
             for darwin_file in $darwin_filelist; do
-              darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP`
+              darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
               $LIPO -create -output "$darwin_file" $darwin_files
             done # $darwin_filelist
             $RM -rf unfat-$$
@@ -3809,30 +2684,25 @@ func_extract_archives ()
         func_extract_an_archive "$my_xdir" "$my_xabs"
         ;;
       esac
-      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP`
+      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
     done
 
     func_extract_archives_result="$my_oldobjs"
 }
 
 
-# func_emit_wrapper [arg=no]
-#
-# Emit a libtool wrapper script on stdout.
-# Don't directly open a file because we may want to
-# incorporate the script contents within a cygwin/mingw
-# wrapper executable.  Must ONLY be called from within
-# func_mode_link because it depends on a number of variables
-# set therein.
+
+# func_emit_wrapper_part1 [arg=no]
 #
-# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
-# variable will take.  If 'yes', then the emitted script
-# will assume that the directory in which it is stored is
-# the $objdir directory.  This is a cygwin/mingw-specific
-# behavior.
-func_emit_wrapper ()
+# Emit the first part of a libtool wrapper script on stdout.
+# For more information, see the description associated with
+# func_emit_wrapper(), below.
+func_emit_wrapper_part1 ()
 {
-        func_emit_wrapper_arg1=${1-no}
+        func_emit_wrapper_part1_arg1=no
+        if test -n "$1" ; then
+          func_emit_wrapper_part1_arg1=$1
+        fi
 
         $ECHO "\
 #! $SHELL
@@ -3848,6 +2718,7 @@ func_emit_wrapper ()
 
 # Sed substitution that helps us do robust quoting.  It backslashifies
 # metacharacters that are still active within double-quoted strings.
+Xsed='${SED} -e 1s/^X//'
 sed_quote_subst='$sed_quote_subst'
 
 # Be Bourne compatible
@@ -3878,132 +2749,31 @@ if test \"\$libtool_install_magic\" = \"$magic\"; then
 else
   # When we are sourced in execute mode, \$file and \$ECHO are already set.
   if test \"\$libtool_execute_magic\" != \"$magic\"; then
-    file=\"\$0\""
-
-    qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"`
-    $ECHO "\
-
-# A function that is used when there is no print builtin or printf.
-func_fallback_echo ()
-{
-  eval 'cat <<_LTECHO_EOF
-\$1
-_LTECHO_EOF'
-}
-    ECHO=\"$qECHO\"
-  fi
-
-# Very basic option parsing. These options are (a) specific to
-# the libtool wrapper, (b) are identical between the wrapper
-# /script/ and the wrapper /executable/ which is used only on
-# windows platforms, and (c) all begin with the string "--lt-"
-# (application programs are unlikely to have options which match
-# this pattern).
-#
-# There are only two supported options: --lt-debug and
-# --lt-dump-script. There is, deliberately, no --lt-help.
-#
-# The first argument to this parsing function should be the
-# script's $0 value, followed by "$@".
-lt_option_debug=
-func_parse_lt_options ()
-{
-  lt_script_arg0=\$0
-  shift
-  for lt_opt
-  do
-    case \"\$lt_opt\" in
-    --lt-debug) lt_option_debug=1 ;;
-    --lt-dump-script)
-        lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\`
-        test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=.
-        lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\`
-        cat \"\$lt_dump_D/\$lt_dump_F\"
-        exit 0
-      ;;
-    --lt-*)
-        \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2
-        exit 1
-      ;;
-    esac
-  done
-
-  # Print the debug banner immediately:
-  if test -n \"\$lt_option_debug\"; then
-    echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2
-  fi
-}
-
-# Used when --lt-debug. Prints its arguments to stdout
-# (redirection is the responsibility of the caller)
-func_lt_dump_args ()
-{
-  lt_dump_args_N=1;
-  for lt_arg
-  do
-    \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\"
-    lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
-  done
-}
-
-# Core function for launching the target application
-func_exec_program_core ()
-{
-"
-  case $host in
-  # Backslashes separate directories on plain windows
-  *-*-mingw | *-*-os2* | *-cegcc*)
-    $ECHO "\
-      if test -n \"\$lt_option_debug\"; then
-        \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2
-        func_lt_dump_args \${1+\"\$@\"} 1>&2
-      fi
-      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
-"
-    ;;
-
-  *)
-    $ECHO "\
-      if test -n \"\$lt_option_debug\"; then
-        \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2
-        func_lt_dump_args \${1+\"\$@\"} 1>&2
-      fi
-      exec \"\$progdir/\$program\" \${1+\"\$@\"}
+    ECHO=\"$qecho\"
+    file=\"\$0\"
+    # Make sure echo works.
+    if test \"X\$1\" = X--no-reexec; then
+      # Discard the --no-reexec flag, and continue.
+      shift
+    elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then
+      # Yippee, \$ECHO works!
+      :
+    else
+      # Restart under the correct shell, and then maybe \$ECHO will work.
+      exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
+    fi
+  fi\
 "
-    ;;
-  esac
-  $ECHO "\
-      \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
-      exit 1
-}
-
-# A function to encapsulate launching the target application
-# Strips options in the --lt-* namespace from \$@ and
-# launches target application with the remaining arguments.
-func_exec_program ()
-{
-  for lt_wr_arg
-  do
-    case \$lt_wr_arg in
-    --lt-*) ;;
-    *) set x \"\$@\" \"\$lt_wr_arg\"; shift;;
-    esac
-    shift
-  done
-  func_exec_program_core \${1+\"\$@\"}
-}
-
-  # Parse options
-  func_parse_lt_options \"\$0\" \${1+\"\$@\"}
+        $ECHO "\
 
   # Find the directory that this script lives in.
-  thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\`
+  thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
   test \"x\$thisdir\" = \"x\$file\" && thisdir=.
 
   # Follow symbolic links until we get to the real thisdir.
-  file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\`
+  file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
   while test -n \"\$file\"; do
-    destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\`
+    destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
 
     # If there was a directory component, then change thisdir.
     if test \"x\$destdir\" != \"x\$file\"; then
@@ -4013,13 +2783,30 @@ func_exec_program ()
       esac
     fi
 
-    file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\`
-    file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\`
+    file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
+    file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
   done
+"
+}
+# end: func_emit_wrapper_part1
+
+# func_emit_wrapper_part2 [arg=no]
+#
+# Emit the second part of a libtool wrapper script on stdout.
+# For more information, see the description associated with
+# func_emit_wrapper(), below.
+func_emit_wrapper_part2 ()
+{
+        func_emit_wrapper_part2_arg1=no
+        if test -n "$1" ; then
+          func_emit_wrapper_part2_arg1=$1
+        fi
+
+        $ECHO "\
 
   # Usually 'no', except on cygwin/mingw when embedded into
   # the cwrapper.
-  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1
+  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_part2_arg1
   if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
     # special case for '.'
     if test \"\$thisdir\" = \".\"; then
@@ -4027,7 +2814,7 @@ func_exec_program ()
     fi
     # remove .libs from thisdir
     case \"\$thisdir\" in
-    *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;;
+    *[\\\\/]$objdir ) thisdir=\`\$ECHO \"X\$thisdir\" | \$Xsed -e 's%[\\\\/][^\\\\/]*$%%'\` ;;
     $objdir )   thisdir=. ;;
     esac
   fi
@@ -4082,18 +2869,6 @@ func_exec_program ()
 
   if test -f \"\$progdir/\$program\"; then"
 
-        # fixup the dll searchpath if we need to.
-        #
-        # Fix the DLL searchpath if we need to.  Do this before prepending
-        # to shlibpath, because on Windows, both are PATH and uninstalled
-        # libraries must come first.
-        if test -n "$dllsearchpath"; then
-          $ECHO "\
-    # Add the dll search path components to the executable PATH
-    PATH=$dllsearchpath:\$PATH
-"
-        fi
-
         # Export our shlibpath_var if we have one.
         if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
           $ECHO "\
@@ -4102,28 +2877,253 @@ func_exec_program ()
 
     # Some systems cannot cope with colon-terminated $shlibpath_var
     # The second colon is a workaround for a bug in BeOS R4 sed
-    $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\`
+    $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
 
     export $shlibpath_var
 "
         fi
 
+        # fixup the dll searchpath if we need to.
+        if test -n "$dllsearchpath"; then
+          $ECHO "\
+    # Add the dll search path components to the executable PATH
+    PATH=$dllsearchpath:\$PATH
+"
+        fi
+
         $ECHO "\
     if test \"\$libtool_execute_magic\" != \"$magic\"; then
       # Run the actual program with our arguments.
-      func_exec_program \${1+\"\$@\"}
+"
+        case $host in
+        # Backslashes separate directories on plain windows
+        *-*-mingw | *-*-os2* | *-cegcc*)
+          $ECHO "\
+      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
+"
+          ;;
+
+        *)
+          $ECHO "\
+      exec \"\$progdir/\$program\" \${1+\"\$@\"}
+"
+          ;;
+        esac
+        $ECHO "\
+      \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
+      exit 1
     fi
   else
     # The program doesn't exist.
     \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
     \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
-    \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
+    $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
     exit 1
   fi
 fi\
 "
 }
+# end: func_emit_wrapper_part2
+
+
+# func_emit_wrapper [arg=no]
+#
+# Emit a libtool wrapper script on stdout.
+# Don't directly open a file because we may want to
+# incorporate the script contents within a cygwin/mingw
+# wrapper executable.  Must ONLY be called from within
+# func_mode_link because it depends on a number of variables
+# set therein.
+#
+# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
+# variable will take.  If 'yes', then the emitted script
+# will assume that the directory in which it is stored is
+# the $objdir directory.  This is a cygwin/mingw-specific
+# behavior.
+func_emit_wrapper ()
+{
+        func_emit_wrapper_arg1=no
+        if test -n "$1" ; then
+          func_emit_wrapper_arg1=$1
+        fi
+
+        # split this up so that func_emit_cwrapperexe_src
+        # can call each part independently.
+        func_emit_wrapper_part1 "${func_emit_wrapper_arg1}"
+        func_emit_wrapper_part2 "${func_emit_wrapper_arg1}"
+}
+
+
+# func_to_host_path arg
+#
+# Convert paths to host format when used with build tools.
+# Intended for use with "native" mingw (where libtool itself
+# is running under the msys shell), or in the following cross-
+# build environments:
+#    $build          $host
+#    mingw (msys)    mingw  [e.g. native]
+#    cygwin          mingw
+#    *nix + wine     mingw
+# where wine is equipped with the `winepath' executable.
+# In the native mingw case, the (msys) shell automatically
+# converts paths for any non-msys applications it launches,
+# but that facility isn't available from inside the cwrapper.
+# Similar accommodations are necessary for $host mingw and
+# $build cygwin.  Calling this function does no harm for other
+# $host/$build combinations not listed above.
+#
+# ARG is the path (on $build) that should be converted to
+# the proper representation for $host. The result is stored
+# in $func_to_host_path_result.
+func_to_host_path ()
+{
+  func_to_host_path_result="$1"
+  if test -n "$1" ; then
+    case $host in
+      *mingw* )
+        lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+        case $build in
+          *mingw* ) # actually, msys
+            # awkward: cmd appends spaces to result
+            lt_sed_strip_trailing_spaces="s/[ ]*\$//"
+            func_to_host_path_tmp1=`( cmd //c echo "$1" |\
+              $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
+            func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
+              $SED -e "$lt_sed_naive_backslashify"`
+            ;;
+          *cygwin* )
+            func_to_host_path_tmp1=`cygpath -w "$1"`
+            func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
+              $SED -e "$lt_sed_naive_backslashify"`
+            ;;
+          * )
+            # Unfortunately, winepath does not exit with a non-zero
+            # error code, so we are forced to check the contents of
+            # stdout. On the other hand, if the command is not
+            # found, the shell will set an exit code of 127 and print
+            # *an error message* to stdout. So we must check for both
+            # error code of zero AND non-empty stdout, which explains
+            # the odd construction:
+            func_to_host_path_tmp1=`winepath -w "$1" 2>/dev/null`
+            if test "$?" -eq 0 && test -n "${func_to_host_path_tmp1}"; then
+              func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
+                $SED -e "$lt_sed_naive_backslashify"`
+            else
+              # Allow warning below.
+              func_to_host_path_result=""
+            fi
+            ;;
+        esac
+        if test -z "$func_to_host_path_result" ; then
+          func_error "Could not determine host path corresponding to"
+          func_error "  '$1'"
+          func_error "Continuing, but uninstalled executables may not work."
+          # Fallback:
+          func_to_host_path_result="$1"
+        fi
+        ;;
+    esac
+  fi
+}
+# end: func_to_host_path
 
+# func_to_host_pathlist arg
+#
+# Convert pathlists to host format when used with build tools.
+# See func_to_host_path(), above. This function supports the
+# following $build/$host combinations (but does no harm for
+# combinations not listed here):
+#    $build          $host
+#    mingw (msys)    mingw  [e.g. native]
+#    cygwin          mingw
+#    *nix + wine     mingw
+#
+# Path separators are also converted from $build format to
+# $host format. If ARG begins or ends with a path separator
+# character, it is preserved (but converted to $host format)
+# on output.
+#
+# ARG is a pathlist (on $build) that should be converted to
+# the proper representation on $host. The result is stored
+# in $func_to_host_pathlist_result.
+func_to_host_pathlist ()
+{
+  func_to_host_pathlist_result="$1"
+  if test -n "$1" ; then
+    case $host in
+      *mingw* )
+        lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+        # Remove leading and trailing path separator characters from
+        # ARG. msys behavior is inconsistent here, cygpath turns them
+        # into '.;' and ';.', and winepath ignores them completely.
+        func_to_host_pathlist_tmp2="$1"
+        # Once set for this call, this variable should not be
+        # reassigned. It is used in tha fallback case.
+        func_to_host_pathlist_tmp1=`echo "$func_to_host_pathlist_tmp2" |\
+          $SED -e 's|^:*||' -e 's|:*$||'`
+        case $build in
+          *mingw* ) # Actually, msys.
+            # Awkward: cmd appends spaces to result.
+            lt_sed_strip_trailing_spaces="s/[ ]*\$//"
+            func_to_host_pathlist_tmp2=`( cmd //c echo "$func_to_host_pathlist_tmp1" |\
+              $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
+            func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
+              $SED -e "$lt_sed_naive_backslashify"`
+            ;;
+          *cygwin* )
+            func_to_host_pathlist_tmp2=`cygpath -w -p "$func_to_host_pathlist_tmp1"`
+            func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
+              $SED -e "$lt_sed_naive_backslashify"`
+            ;;
+          * )
+            # unfortunately, winepath doesn't convert pathlists
+            func_to_host_pathlist_result=""
+            func_to_host_pathlist_oldIFS=$IFS
+            IFS=:
+            for func_to_host_pathlist_f in $func_to_host_pathlist_tmp1 ; do
+              IFS=$func_to_host_pathlist_oldIFS
+              if test -n "$func_to_host_pathlist_f" ; then
+                func_to_host_path "$func_to_host_pathlist_f"
+                if test -n "$func_to_host_path_result" ; then
+                  if test -z "$func_to_host_pathlist_result" ; then
+                    func_to_host_pathlist_result="$func_to_host_path_result"
+                  else
+                    func_to_host_pathlist_result="$func_to_host_pathlist_result;$func_to_host_path_result"
+                  fi
+                fi
+              fi
+              IFS=:
+            done
+            IFS=$func_to_host_pathlist_oldIFS
+            ;;
+        esac
+        if test -z "$func_to_host_pathlist_result" ; then
+          func_error "Could not determine the host path(s) corresponding to"
+          func_error "  '$1'"
+          func_error "Continuing, but uninstalled executables may not work."
+          # Fallback. This may break if $1 contains DOS-style drive
+          # specifications. The fix is not to complicate the expression
+          # below, but for the user to provide a working wine installation
+          # with winepath so that path translation in the cross-to-mingw
+          # case works properly.
+          lt_replace_pathsep_nix_to_dos="s|:|;|g"
+          func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp1" |\
+            $SED -e "$lt_replace_pathsep_nix_to_dos"`
+        fi
+        # Now, add the leading and trailing path separators back
+        case "$1" in
+          :* ) func_to_host_pathlist_result=";$func_to_host_pathlist_result"
+            ;;
+        esac
+        case "$1" in
+          *: ) func_to_host_pathlist_result="$func_to_host_pathlist_result;"
+            ;;
+        esac
+        ;;
+    esac
+  fi
+}
+# end: func_to_host_pathlist
 
 # func_emit_cwrapperexe_src
 # emit the source code for a wrapper executable on stdout
@@ -4141,23 +3141,31 @@ func_emit_cwrapperexe_src ()
 
    This wrapper executable should never be moved out of the build directory.
    If it is, it will not operate correctly.
+
+   Currently, it simply execs the wrapper *script* "$SHELL $output",
+   but could eventually absorb all of the scripts functionality and
+   exec $objdir/$outputname directly.
 */
 EOF
             cat <<"EOF"
-#ifdef _MSC_VER
-# define _CRT_SECURE_NO_DEPRECATE 1
-#endif
 #include <stdio.h>
 #include <stdlib.h>
 #ifdef _MSC_VER
 # include <direct.h>
 # include <process.h>
 # include <io.h>
+# define setmode _setmode
 #else
 # include <unistd.h>
 # include <stdint.h>
 # ifdef __CYGWIN__
 #  include <io.h>
+#  define HAVE_SETENV
+#  ifdef __STRICT_ANSI__
+char *realpath (const char *, char *);
+int putenv (char *);
+int setenv (const char *, const char *, int);
+#  endif
 # endif
 #endif
 #include <malloc.h>
@@ -4169,44 +3177,6 @@ EOF
 #include <fcntl.h>
 #include <sys/stat.h>
 
-/* declarations of non-ANSI functions */
-#if defined(__MINGW32__)
-# ifdef __STRICT_ANSI__
-int _putenv (const char *);
-# endif
-#elif defined(__CYGWIN__)
-# ifdef __STRICT_ANSI__
-char *realpath (const char *, char *);
-int putenv (char *);
-int setenv (const char *, const char *, int);
-# endif
-/* #elif defined (other platforms) ... */
-#endif
-
-/* portability defines, excluding path handling macros */
-#if defined(_MSC_VER)
-# define setmode _setmode
-# define stat    _stat
-# define chmod   _chmod
-# define getcwd  _getcwd
-# define putenv  _putenv
-# define S_IXUSR _S_IEXEC
-# ifndef _INTPTR_T_DEFINED
-#  define _INTPTR_T_DEFINED
-#  define intptr_t int
-# endif
-#elif defined(__MINGW32__)
-# define setmode _setmode
-# define stat    _stat
-# define chmod   _chmod
-# define getcwd  _getcwd
-# define putenv  _putenv
-#elif defined(__CYGWIN__)
-# define HAVE_SETENV
-# define FOPEN_WB "wb"
-/* #elif defined (other platforms) ... */
-#endif
-
 #if defined(PATH_MAX)
 # define LT_PATHMAX PATH_MAX
 #elif defined(MAXPATHLEN)
@@ -4222,7 +3192,14 @@ int setenv (const char *, const char *, int);
 # define S_IXGRP 0
 #endif
 
-/* path handling portability macros */
+#ifdef _MSC_VER
+# define S_IXUSR _S_IEXEC
+# define stat _stat
+# ifndef _INTPTR_T_DEFINED
+#  define intptr_t int
+# endif
+#endif
+
 #ifndef DIR_SEPARATOR
 # define DIR_SEPARATOR '/'
 # define PATH_SEPARATOR ':'
@@ -4253,6 +3230,10 @@ int setenv (const char *, const char *, int);
 # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
 #endif /* PATH_SEPARATOR_2 */
 
+#ifdef __CYGWIN__
+# define FOPEN_WB "wb"
+#endif
+
 #ifndef FOPEN_WB
 # define FOPEN_WB "w"
 #endif
@@ -4265,13 +3246,22 @@ int setenv (const char *, const char *, int);
   if (stale) { free ((void *) stale); stale = 0; } \
 } while (0)
 
-#if defined(LT_DEBUGWRAPPER)
-static int lt_debug = 1;
+#undef LTWRAPPER_DEBUGPRINTF
+#if defined DEBUGWRAPPER
+# define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args
+static void
+ltwrapper_debugprintf (const char *fmt, ...)
+{
+    va_list args;
+    va_start (args, fmt);
+    (void) vfprintf (stderr, fmt, args);
+    va_end (args);
+}
 #else
-static int lt_debug = 0;
+# define LTWRAPPER_DEBUGPRINTF(args)
 #endif
 
-const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */
+const char *program_name = NULL;
 
 void *xmalloc (size_t num);
 char *xstrdup (const char *string);
@@ -4281,27 +3271,41 @@ char *chase_symlinks (const char *pathspec);
 int make_executable (const char *path);
 int check_executable (const char *path);
 char *strendzap (char *str, const char *pat);
-void lt_debugprintf (const char *file, int line, const char *fmt, ...);
-void lt_fatal (const char *file, int line, const char *message, ...);
-static const char *nonnull (const char *s);
-static const char *nonempty (const char *s);
+void lt_fatal (const char *message, ...);
 void lt_setenv (const char *name, const char *value);
 char *lt_extend_str (const char *orig_value, const char *add, int to_end);
+void lt_opt_process_env_set (const char *arg);
+void lt_opt_process_env_prepend (const char *arg);
+void lt_opt_process_env_append (const char *arg);
+int lt_split_name_value (const char *arg, char** name, char** value);
 void lt_update_exe_path (const char *name, const char *value);
 void lt_update_lib_path (const char *name, const char *value);
-char **prepare_spawn (char **argv);
-void lt_dump_script (FILE *f);
+
+static const char *script_text_part1 =
 EOF
 
+            func_emit_wrapper_part1 yes |
+                $SED -e 's/\([\\"]\)/\\\1/g' \
+                     -e 's/^/  "/' -e 's/$/\\n"/'
+            echo ";"
             cat <<EOF
-volatile const char * MAGIC_EXE = "$magic_exe";
+
+static const char *script_text_part2 =
+EOF
+            func_emit_wrapper_part2 yes |
+                $SED -e 's/\([\\"]\)/\\\1/g' \
+                     -e 's/^/  "/' -e 's/$/\\n"/'
+            echo ";"
+
+            cat <<EOF
+const char * MAGIC_EXE = "$magic_exe";
 const char * LIB_PATH_VARNAME = "$shlibpath_var";
 EOF
 
             if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
-              func_to_host_path "$temp_rpath"
+              func_to_host_pathlist "$temp_rpath"
               cat <<EOF
-const char * LIB_PATH_VALUE   = "$func_to_host_path_result";
+const char * LIB_PATH_VALUE   = "$func_to_host_pathlist_result";
 EOF
             else
               cat <<"EOF"
@@ -4310,10 +3314,10 @@ EOF
             fi
 
             if test -n "$dllsearchpath"; then
-              func_to_host_path "$dllsearchpath:"
+              func_to_host_pathlist "$dllsearchpath:"
               cat <<EOF
 const char * EXE_PATH_VARNAME = "PATH";
-const char * EXE_PATH_VALUE   = "$func_to_host_path_result";
+const char * EXE_PATH_VALUE   = "$func_to_host_pathlist_result";
 EOF
             else
               cat <<"EOF"
@@ -4336,10 +3340,24 @@ EOF
             cat <<"EOF"
 
 #define LTWRAPPER_OPTION_PREFIX         "--lt-"
+#define LTWRAPPER_OPTION_PREFIX_LENGTH  5
 
+static const size_t opt_prefix_len         = LTWRAPPER_OPTION_PREFIX_LENGTH;
 static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
+
 static const char *dumpscript_opt       = LTWRAPPER_OPTION_PREFIX "dump-script";
-static const char *debug_opt            = LTWRAPPER_OPTION_PREFIX "debug";
+
+static const size_t env_set_opt_len     = LTWRAPPER_OPTION_PREFIX_LENGTH + 7;
+static const char *env_set_opt          = LTWRAPPER_OPTION_PREFIX "env-set";
+  /* argument is putenv-style "foo=bar", value of foo is set to bar */
+
+static const size_t env_prepend_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 11;
+static const char *env_prepend_opt      = LTWRAPPER_OPTION_PREFIX "env-prepend";
+  /* argument is putenv-style "foo=bar", new value of foo is bar${foo} */
+
+static const size_t env_append_opt_len  = LTWRAPPER_OPTION_PREFIX_LENGTH + 10;
+static const char *env_append_opt       = LTWRAPPER_OPTION_PREFIX "env-append";
+  /* argument is putenv-style "foo=bar", new value of foo is ${foo}bar */
 
 int
 main (int argc, char *argv[])
@@ -4356,13 +3374,10 @@ main (int argc, char *argv[])
   int i;
 
   program_name = (char *) xstrdup (base_name (argv[0]));
-  newargz = XMALLOC (char *, argc + 1);
+  LTWRAPPER_DEBUGPRINTF (("(main) argv[0]      : %s\n", argv[0]));
+  LTWRAPPER_DEBUGPRINTF (("(main) program_name : %s\n", program_name));
 
-  /* very simple arg parsing; don't want to rely on getopt
-   * also, copy all non cwrapper options to newargz, except
-   * argz[0], which is handled differently
-   */
-  newargc=0;
+  /* very simple arg parsing; don't want to rely on getopt */
   for (i = 1; i < argc; i++)
     {
       if (strcmp (argv[i], dumpscript_opt) == 0)
@@ -4376,57 +3391,25 @@ EOF
               esac
 
             cat <<"EOF"
-          lt_dump_script (stdout);
+          printf ("%s", script_text_part1);
+          printf ("%s", script_text_part2);
           return 0;
         }
-      if (strcmp (argv[i], debug_opt) == 0)
-        {
-          lt_debug = 1;
-          continue;
-        }
-      if (strcmp (argv[i], ltwrapper_option_prefix) == 0)
-        {
-          /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
-             namespace, but it is not one of the ones we know about and
-             have already dealt with, above (inluding dump-script), then
-             report an error. Otherwise, targets might begin to believe
-             they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
-             namespace. The first time any user complains about this, we'll
-             need to make LTWRAPPER_OPTION_PREFIX a configure-time option
-             or a configure.ac-settable value.
-           */
-          lt_fatal (__FILE__, __LINE__,
-                    "unrecognized %s option: '%s'",
-                    ltwrapper_option_prefix, argv[i]);
-        }
-      /* otherwise ... */
-      newargz[++newargc] = xstrdup (argv[i]);
     }
-  newargz[++newargc] = NULL;
-
-EOF
-            cat <<EOF
-  /* The GNU banner must be the first non-error debug message */
-  lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\n");
-EOF
-            cat <<"EOF"
-  lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]);
-  lt_debugprintf (__FILE__, __LINE__, "(main) program_name: %s\n", program_name);
 
+  newargz = XMALLOC (char *, argc + 1);
   tmp_pathspec = find_executable (argv[0]);
   if (tmp_pathspec == NULL)
-    lt_fatal (__FILE__, __LINE__, "couldn't find %s", argv[0]);
-  lt_debugprintf (__FILE__, __LINE__,
-                  "(main) found exe (before symlink chase) at: %s\n",
-                  tmp_pathspec);
+    lt_fatal ("Couldn't find %s", argv[0]);
+  LTWRAPPER_DEBUGPRINTF (("(main) found exe (before symlink chase) at : %s\n",
+                          tmp_pathspec));
 
   actual_cwrapper_path = chase_symlinks (tmp_pathspec);
-  lt_debugprintf (__FILE__, __LINE__,
-                  "(main) found exe (after symlink chase) at: %s\n",
-                  actual_cwrapper_path);
+  LTWRAPPER_DEBUGPRINTF (("(main) found exe (after symlink chase) at : %s\n",
+                          actual_cwrapper_path));
   XFREE (tmp_pathspec);
 
-  actual_cwrapper_name = xstrdup (base_name (actual_cwrapper_path));
+  actual_cwrapper_name = xstrdup( base_name (actual_cwrapper_path));
   strendzap (actual_cwrapper_path, actual_cwrapper_name);
 
   /* wrapper name transforms */
@@ -4444,9 +3427,8 @@ EOF
   target_name = tmp_pathspec;
   tmp_pathspec = 0;
 
-  lt_debugprintf (__FILE__, __LINE__,
-                  "(main) libtool target name: %s\n",
-                  target_name);
+  LTWRAPPER_DEBUGPRINTF (("(main) libtool target name: %s\n",
+                          target_name));
 EOF
 
             cat <<EOF
@@ -4496,19 +3478,80 @@ EOF
 
   lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
   lt_setenv ("DUALCASE", "1");  /* for MSK sh */
-  /* Update the DLL searchpath.  EXE_PATH_VALUE ($dllsearchpath) must
-     be prepended before (that is, appear after) LIB_PATH_VALUE ($temp_rpath)
-     because on Windows, both *_VARNAMEs are PATH but uninstalled
-     libraries must come first. */
-  lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
   lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
+  lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
 
-  lt_debugprintf (__FILE__, __LINE__, "(main) lt_argv_zero: %s\n",
-                  nonnull (lt_argv_zero));
+  newargc=0;
+  for (i = 1; i < argc; i++)
+    {
+      if (strncmp (argv[i], env_set_opt, env_set_opt_len) == 0)
+        {
+          if (argv[i][env_set_opt_len] == '=')
+            {
+              const char *p = argv[i] + env_set_opt_len + 1;
+              lt_opt_process_env_set (p);
+            }
+          else if (argv[i][env_set_opt_len] == '\0' && i + 1 < argc)
+            {
+              lt_opt_process_env_set (argv[++i]); /* don't copy */
+            }
+          else
+            lt_fatal ("%s missing required argument", env_set_opt);
+          continue;
+        }
+      if (strncmp (argv[i], env_prepend_opt, env_prepend_opt_len) == 0)
+        {
+          if (argv[i][env_prepend_opt_len] == '=')
+            {
+              const char *p = argv[i] + env_prepend_opt_len + 1;
+              lt_opt_process_env_prepend (p);
+            }
+          else if (argv[i][env_prepend_opt_len] == '\0' && i + 1 < argc)
+            {
+              lt_opt_process_env_prepend (argv[++i]); /* don't copy */
+            }
+          else
+            lt_fatal ("%s missing required argument", env_prepend_opt);
+          continue;
+        }
+      if (strncmp (argv[i], env_append_opt, env_append_opt_len) == 0)
+        {
+          if (argv[i][env_append_opt_len] == '=')
+            {
+              const char *p = argv[i] + env_append_opt_len + 1;
+              lt_opt_process_env_append (p);
+            }
+          else if (argv[i][env_append_opt_len] == '\0' && i + 1 < argc)
+            {
+              lt_opt_process_env_append (argv[++i]); /* don't copy */
+            }
+          else
+            lt_fatal ("%s missing required argument", env_append_opt);
+          continue;
+        }
+      if (strncmp (argv[i], ltwrapper_option_prefix, opt_prefix_len) == 0)
+        {
+          /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
+             namespace, but it is not one of the ones we know about and
+             have already dealt with, above (inluding dump-script), then
+             report an error. Otherwise, targets might begin to believe
+             they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
+             namespace. The first time any user complains about this, we'll
+             need to make LTWRAPPER_OPTION_PREFIX a configure-time option
+             or a configure.ac-settable value.
+           */
+          lt_fatal ("Unrecognized option in %s namespace: '%s'",
+                    ltwrapper_option_prefix, argv[i]);
+        }
+      /* otherwise ... */
+      newargz[++newargc] = xstrdup (argv[i]);
+    }
+  newargz[++newargc] = NULL;
+
+  LTWRAPPER_DEBUGPRINTF     (("(main) lt_argv_zero : %s\n", (lt_argv_zero ? lt_argv_zero : "<NULL>")));
   for (i = 0; i < newargc; i++)
     {
-      lt_debugprintf (__FILE__, __LINE__, "(main) newargz[%d]: %s\n",
-                      i, nonnull (newargz[i]));
+      LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d]   : %s\n", i, (newargz[i] ? newargz[i] : "<NULL>")));
     }
 
 EOF
@@ -4517,14 +3560,11 @@ EOF
               mingw*)
                 cat <<"EOF"
   /* execv doesn't actually work on mingw as expected on unix */
-  newargz = prepare_spawn (newargz);
   rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
   if (rval == -1)
     {
       /* failed to start process */
-      lt_debugprintf (__FILE__, __LINE__,
-                      "(main) failed to launch target \"%s\": %s\n",
-                      lt_argv_zero, nonnull (strerror (errno)));
+      LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"%s\": errno = %d\n", lt_argv_zero, errno));
       return 127;
     }
   return rval;
@@ -4546,7 +3586,7 @@ xmalloc (size_t num)
 {
   void *p = (void *) malloc (num);
   if (!p)
-    lt_fatal (__FILE__, __LINE__, "memory exhausted");
+    lt_fatal ("Memory exhausted");
 
   return p;
 }
@@ -4580,8 +3620,8 @@ check_executable (const char *path)
 {
   struct stat st;
 
-  lt_debugprintf (__FILE__, __LINE__, "(check_executable): %s\n",
-                  nonempty (path));
+  LTWRAPPER_DEBUGPRINTF (("(check_executable)  : %s\n",
+                          path ? (*path ? path : "EMPTY!") : "NULL!"));
   if ((!path) || (!*path))
     return 0;
 
@@ -4598,8 +3638,8 @@ make_executable (const char *path)
   int rval = 0;
   struct stat st;
 
-  lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n",
-                  nonempty (path));
+  LTWRAPPER_DEBUGPRINTF (("(make_executable)   : %s\n",
+                          path ? (*path ? path : "EMPTY!") : "NULL!"));
   if ((!path) || (!*path))
     return 0;
 
@@ -4625,8 +3665,8 @@ find_executable (const char *wrapper)
   int tmp_len;
   char *concat_name;
 
-  lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n",
-                  nonempty (wrapper));
+  LTWRAPPER_DEBUGPRINTF (("(find_executable)   : %s\n",
+                          wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!"));
 
   if ((wrapper == NULL) || (*wrapper == '\0'))
     return NULL;
@@ -4679,8 +3719,7 @@ find_executable (const char *wrapper)
                 {
                   /* empty path: current directory */
                   if (getcwd (tmp, LT_PATHMAX) == NULL)
-                    lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
-                              nonnull (strerror (errno)));
+                    lt_fatal ("getcwd failed");
                   tmp_len = strlen (tmp);
                   concat_name =
                     XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
@@ -4705,8 +3744,7 @@ find_executable (const char *wrapper)
     }
   /* Relative path | not found in path: prepend cwd */
   if (getcwd (tmp, LT_PATHMAX) == NULL)
-    lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
-              nonnull (strerror (errno)));
+    lt_fatal ("getcwd failed");
   tmp_len = strlen (tmp);
   concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
   memcpy (concat_name, tmp, tmp_len);
@@ -4732,9 +3770,8 @@ chase_symlinks (const char *pathspec)
   int has_symlinks = 0;
   while (strlen (tmp_pathspec) && !has_symlinks)
     {
-      lt_debugprintf (__FILE__, __LINE__,
-                      "checking path component for symlinks: %s\n",
-                      tmp_pathspec);
+      LTWRAPPER_DEBUGPRINTF (("checking path component for symlinks: %s\n",
+                              tmp_pathspec));
       if (lstat (tmp_pathspec, &s) == 0)
         {
           if (S_ISLNK (s.st_mode) != 0)
@@ -4756,9 +3793,8 @@ chase_symlinks (const char *pathspec)
         }
       else
         {
-          lt_fatal (__FILE__, __LINE__,
-                    "error accessing file \"%s\": %s",
-                    tmp_pathspec, nonnull (strerror (errno)));
+          char *errstr = strerror (errno);
+          lt_fatal ("Error accessing file %s (%s)", tmp_pathspec, errstr);
         }
     }
   XFREE (tmp_pathspec);
@@ -4771,8 +3807,7 @@ chase_symlinks (const char *pathspec)
   tmp_pathspec = realpath (pathspec, buf);
   if (tmp_pathspec == 0)
     {
-      lt_fatal (__FILE__, __LINE__,
-                "could not follow symlinks for %s", pathspec);
+      lt_fatal ("Could not follow symlinks for %s", pathspec);
     }
   return xstrdup (tmp_pathspec);
 #endif
@@ -4798,25 +3833,11 @@ strendzap (char *str, const char *pat)
   return str;
 }
 
-void
-lt_debugprintf (const char *file, int line, const char *fmt, ...)
-{
-  va_list args;
-  if (lt_debug)
-    {
-      (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line);
-      va_start (args, fmt);
-      (void) vfprintf (stderr, fmt, args);
-      va_end (args);
-    }
-}
-
 static void
-lt_error_core (int exit_status, const char *file,
-               int line, const char *mode,
+lt_error_core (int exit_status, const char *mode,
                const char *message, va_list ap)
 {
-  fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode);
+  fprintf (stderr, "%s: %s: ", program_name, mode);
   vfprintf (stderr, message, ap);
   fprintf (stderr, ".\n");
 
@@ -4825,32 +3846,20 @@ lt_error_core (int exit_status, const char *file,
 }
 
 void
-lt_fatal (const char *file, int line, const char *message, ...)
+lt_fatal (const char *message, ...)
 {
   va_list ap;
   va_start (ap, message);
-  lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap);
+  lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
   va_end (ap);
 }
 
-static const char *
-nonnull (const char *s)
-{
-  return s ? s : "(null)";
-}
-
-static const char *
-nonempty (const char *s)
-{
-  return (s && !*s) ? "(empty)" : nonnull (s);
-}
-
 void
 lt_setenv (const char *name, const char *value)
 {
-  lt_debugprintf (__FILE__, __LINE__,
-                  "(lt_setenv) setting '%s' to '%s'\n",
-                  nonnull (name), nonnull (value));
+  LTWRAPPER_DEBUGPRINTF (("(lt_setenv) setting '%s' to '%s'\n",
+                          (name ? name : "<NULL>"),
+                          (value ? value : "<NULL>")));
   {
 #ifdef HAVE_SETENV
     /* always make a copy, for consistency with !HAVE_SETENV */
@@ -4895,12 +3904,95 @@ lt_extend_str (const char *orig_value, const char *add, int to_end)
   return new_value;
 }
 
+int
+lt_split_name_value (const char *arg, char** name, char** value)
+{
+  const char *p;
+  int len;
+  if (!arg || !*arg)
+    return 1;
+
+  p = strchr (arg, (int)'=');
+
+  if (!p)
+    return 1;
+
+  *value = xstrdup (++p);
+
+  len = strlen (arg) - strlen (*value);
+  *name = XMALLOC (char, len);
+  strncpy (*name, arg, len-1);
+  (*name)[len - 1] = '\0';
+
+  return 0;
+}
+
+void
+lt_opt_process_env_set (const char *arg)
+{
+  char *name = NULL;
+  char *value = NULL;
+
+  if (lt_split_name_value (arg, &name, &value) != 0)
+    {
+      XFREE (name);
+      XFREE (value);
+      lt_fatal ("bad argument for %s: '%s'", env_set_opt, arg);
+    }
+
+  lt_setenv (name, value);
+  XFREE (name);
+  XFREE (value);
+}
+
+void
+lt_opt_process_env_prepend (const char *arg)
+{
+  char *name = NULL;
+  char *value = NULL;
+  char *new_value = NULL;
+
+  if (lt_split_name_value (arg, &name, &value) != 0)
+    {
+      XFREE (name);
+      XFREE (value);
+      lt_fatal ("bad argument for %s: '%s'", env_prepend_opt, arg);
+    }
+
+  new_value = lt_extend_str (getenv (name), value, 0);
+  lt_setenv (name, new_value);
+  XFREE (new_value);
+  XFREE (name);
+  XFREE (value);
+}
+
+void
+lt_opt_process_env_append (const char *arg)
+{
+  char *name = NULL;
+  char *value = NULL;
+  char *new_value = NULL;
+
+  if (lt_split_name_value (arg, &name, &value) != 0)
+    {
+      XFREE (name);
+      XFREE (value);
+      lt_fatal ("bad argument for %s: '%s'", env_append_opt, arg);
+    }
+
+  new_value = lt_extend_str (getenv (name), value, 1);
+  lt_setenv (name, new_value);
+  XFREE (new_value);
+  XFREE (name);
+  XFREE (value);
+}
+
 void
 lt_update_exe_path (const char *name, const char *value)
 {
-  lt_debugprintf (__FILE__, __LINE__,
-                  "(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
-                  nonnull (name), nonnull (value));
+  LTWRAPPER_DEBUGPRINTF (("(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
+                          (name ? name : "<NULL>"),
+                          (value ? value : "<NULL>")));
 
   if (name && *name && value && *value)
     {
@@ -4919,9 +4011,9 @@ lt_update_exe_path (const char *name, const char *value)
 void
 lt_update_lib_path (const char *name, const char *value)
 {
-  lt_debugprintf (__FILE__, __LINE__,
-                  "(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
-                  nonnull (name), nonnull (value));
+  LTWRAPPER_DEBUGPRINTF (("(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
+                          (name ? name : "<NULL>"),
+                          (value ? value : "<NULL>")));
 
   if (name && *name && value && *value)
     {
@@ -4931,152 +4023,11 @@ lt_update_lib_path (const char *name, const char *value)
     }
 }
 
-EOF
-            case $host_os in
-              mingw*)
-                cat <<"EOF"
-
-/* Prepares an argument vector before calling spawn().
-   Note that spawn() does not by itself call the command interpreter
-     (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") :
-      ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO);
-         GetVersionEx(&v);
-         v.dwPlatformId == VER_PLATFORM_WIN32_NT;
-      }) ? "cmd.exe" : "command.com").
-   Instead it simply concatenates the arguments, separated by ' ', and calls
-   CreateProcess().  We must quote the arguments since Win32 CreateProcess()
-   interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a
-   special way:
-   - Space and tab are interpreted as delimiters. They are not treated as
-     delimiters if they are surrounded by double quotes: "...".
-   - Unescaped double quotes are removed from the input. Their only effect is
-     that within double quotes, space and tab are treated like normal
-     characters.
-   - Backslashes not followed by double quotes are not special.
-   - But 2*n+1 backslashes followed by a double quote become
-     n backslashes followed by a double quote (n >= 0):
-       \" -> "
-       \\\" -> \"
-       \\\\\" -> \\"
- */
-#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
-#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
-char **
-prepare_spawn (char **argv)
-{
-  size_t argc;
-  char **new_argv;
-  size_t i;
-
-  /* Count number of arguments.  */
-  for (argc = 0; argv[argc] != NULL; argc++)
-    ;
-
-  /* Allocate new argument vector.  */
-  new_argv = XMALLOC (char *, argc + 1);
-
-  /* Put quoted arguments into the new argument vector.  */
-  for (i = 0; i < argc; i++)
-    {
-      const char *string = argv[i];
-
-      if (string[0] == '\0')
-        new_argv[i] = xstrdup ("\"\"");
-      else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL)
-        {
-          int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL);
-          size_t length;
-          unsigned int backslashes;
-          const char *s;
-          char *quoted_string;
-          char *p;
-
-          length = 0;
-          backslashes = 0;
-          if (quote_around)
-            length++;
-          for (s = string; *s != '\0'; s++)
-            {
-              char c = *s;
-              if (c == '"')
-                length += backslashes + 1;
-              length++;
-              if (c == '\\')
-                backslashes++;
-              else
-                backslashes = 0;
-            }
-          if (quote_around)
-            length += backslashes + 1;
 
-          quoted_string = XMALLOC (char, length + 1);
-
-          p = quoted_string;
-          backslashes = 0;
-          if (quote_around)
-            *p++ = '"';
-          for (s = string; *s != '\0'; s++)
-            {
-              char c = *s;
-              if (c == '"')
-                {
-                  unsigned int j;
-                  for (j = backslashes + 1; j > 0; j--)
-                    *p++ = '\\';
-                }
-              *p++ = c;
-              if (c == '\\')
-                backslashes++;
-              else
-                backslashes = 0;
-            }
-          if (quote_around)
-            {
-              unsigned int j;
-              for (j = backslashes; j > 0; j--)
-                *p++ = '\\';
-              *p++ = '"';
-            }
-          *p = '\0';
-
-          new_argv[i] = quoted_string;
-        }
-      else
-        new_argv[i] = (char *) string;
-    }
-  new_argv[argc] = NULL;
-
-  return new_argv;
-}
-EOF
-                ;;
-            esac
-
-            cat <<"EOF"
-void lt_dump_script (FILE* f)
-{
-EOF
-            func_emit_wrapper yes |
-              $SED -e 's/\([\\"]\)/\\\1/g' \
-                   -e 's/^/  fputs ("/' -e 's/$/\\n", f);/'
-
-            cat <<"EOF"
-}
 EOF
 }
 # end: func_emit_cwrapperexe_src
 
-# func_win32_import_lib_p ARG
-# True if ARG is an import lib, as indicated by $file_magic_cmd
-func_win32_import_lib_p ()
-{
-    $opt_debug
-    case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in
-    *import*) : ;;
-    *) false ;;
-    esac
-}
-
 # func_mode_link arg...
 func_mode_link ()
 {
@@ -5121,7 +4072,6 @@ func_mode_link ()
     new_inherited_linker_flags=
 
     avoid_version=no
-    bindir=
     dlfiles=
     dlprefiles=
     dlself=no
@@ -5214,11 +4164,6 @@ func_mode_link ()
         esac
 
         case $prev in
-        bindir)
-          bindir="$arg"
-          prev=
-          continue
-          ;;
         dlfiles|dlprefiles)
           if test "$preload" = no; then
             # Add the symbol object into the linking commands.
@@ -5250,9 +4195,9 @@ func_mode_link ()
             ;;
           *)
             if test "$prev" = dlfiles; then
-              func_append dlfiles " $arg"
+              dlfiles="$dlfiles $arg"
             else
-              func_append dlprefiles " $arg"
+              dlprefiles="$dlprefiles $arg"
             fi
             prev=
             continue
@@ -5276,7 +4221,7 @@ func_mode_link ()
             *-*-darwin*)
               case "$deplibs " in
                 *" $qarg.ltframework "*) ;;
-                *) func_append deplibs " $qarg.ltframework" # this is fixed later
+                *) deplibs="$deplibs $qarg.ltframework" # this is fixed later
                    ;;
               esac
               ;;
@@ -5295,7 +4240,7 @@ func_mode_link ()
             moreargs=
             for fil in `cat "$save_arg"`
             do
-#             func_append moreargs " $fil"
+#             moreargs="$moreargs $fil"
               arg=$fil
               # A libtool-controlled object.
 
@@ -5324,7 +4269,7 @@ func_mode_link ()
 
                   if test "$prev" = dlfiles; then
                     if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
-                      func_append dlfiles " $pic_object"
+                      dlfiles="$dlfiles $pic_object"
                       prev=
                       continue
                     else
@@ -5336,7 +4281,7 @@ func_mode_link ()
                   # CHECK ME:  I think I busted this.  -Ossama
                   if test "$prev" = dlprefiles; then
                     # Preload the old-style object.
-                    func_append dlprefiles " $pic_object"
+                    dlprefiles="$dlprefiles $pic_object"
                     prev=
                   fi
 
@@ -5406,12 +4351,12 @@ func_mode_link ()
           if test "$prev" = rpath; then
             case "$rpath " in
             *" $arg "*) ;;
-            *) func_append rpath " $arg" ;;
+            *) rpath="$rpath $arg" ;;
             esac
           else
             case "$xrpath " in
             *" $arg "*) ;;
-            *) func_append xrpath " $arg" ;;
+            *) xrpath="$xrpath $arg" ;;
             esac
           fi
           prev=
@@ -5423,28 +4368,28 @@ func_mode_link ()
           continue
           ;;
         weak)
-          func_append weak_libs " $arg"
+          weak_libs="$weak_libs $arg"
           prev=
           continue
           ;;
         xcclinker)
-          func_append linker_flags " $qarg"
-          func_append compiler_flags " $qarg"
+          linker_flags="$linker_flags $qarg"
+          compiler_flags="$compiler_flags $qarg"
           prev=
           func_append compile_command " $qarg"
           func_append finalize_command " $qarg"
           continue
           ;;
         xcompiler)
-          func_append compiler_flags " $qarg"
+          compiler_flags="$compiler_flags $qarg"
           prev=
           func_append compile_command " $qarg"
           func_append finalize_command " $qarg"
           continue
           ;;
         xlinker)
-          func_append linker_flags " $qarg"
-          func_append compiler_flags " $wl$qarg"
+          linker_flags="$linker_flags $qarg"
+          compiler_flags="$compiler_flags $wl$qarg"
           prev=
           func_append compile_command " $wl$qarg"
           func_append finalize_command " $wl$qarg"
@@ -5480,11 +4425,6 @@ func_mode_link ()
         continue
         ;;
 
-      -bindir)
-        prev=bindir
-        continue
-        ;;
-
       -dlopen)
         prev=dlfiles
         continue
@@ -5535,16 +4475,15 @@ func_mode_link ()
         ;;
 
       -L*)
-        func_stripname "-L" '' "$arg"
-        if test -z "$func_stripname_result"; then
+        func_stripname '-L' '' "$arg"
+        dir=$func_stripname_result
+        if test -z "$dir"; then
           if test "$#" -gt 0; then
             func_fatal_error "require no space between \`-L' and \`$1'"
           else
             func_fatal_error "need path for \`-L' option"
           fi
         fi
-        func_resolve_sysroot "$func_stripname_result"
-        dir=$func_resolve_sysroot_result
         # We need an absolute path.
         case $dir in
         [\\/]* | [A-Za-z]:[\\/]*) ;;
@@ -5556,30 +4495,24 @@ func_mode_link ()
           ;;
         esac
         case "$deplibs " in
-        *" -L$dir "* | *" $arg "*)
-          # Will only happen for absolute or sysroot arguments
-          ;;
+        *" -L$dir "*) ;;
         *)
-          # Preserve sysroot, but never include relative directories
-          case $dir in
-            [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;;
-            *) func_append deplibs " -L$dir" ;;
-          esac
-          func_append lib_search_path " $dir"
+          deplibs="$deplibs -L$dir"
+          lib_search_path="$lib_search_path $dir"
           ;;
         esac
         case $host in
         *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
-          testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'`
+          testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'`
           case :$dllsearchpath: in
           *":$dir:"*) ;;
           ::) dllsearchpath=$dir;;
-          *) func_append dllsearchpath ":$dir";;
+          *) dllsearchpath="$dllsearchpath:$dir";;
           esac
           case :$dllsearchpath: in
           *":$testbindir:"*) ;;
           ::) dllsearchpath=$testbindir;;
-          *) func_append dllsearchpath ":$testbindir";;
+          *) dllsearchpath="$dllsearchpath:$testbindir";;
           esac
           ;;
         esac
@@ -5589,7 +4522,7 @@ func_mode_link ()
       -l*)
         if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
           case $host in
-          *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*)
+          *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc*)
             # These systems don't actually have a C or math library (as such)
             continue
             ;;
@@ -5603,7 +4536,7 @@ func_mode_link ()
             ;;
           *-*-rhapsody* | *-*-darwin1.[012])
             # Rhapsody C and math libraries are in the System framework
-            func_append deplibs " System.ltframework"
+            deplibs="$deplibs System.ltframework"
             continue
             ;;
           *-*-sco3.2v5* | *-*-sco5v6*)
@@ -5623,7 +4556,7 @@ func_mode_link ()
            ;;
          esac
         fi
-        func_append deplibs " $arg"
+        deplibs="$deplibs $arg"
         continue
         ;;
 
@@ -5635,8 +4568,8 @@ func_mode_link ()
       # Tru64 UNIX uses -model [arg] to determine the layout of C++
       # classes, name mangling, and exception handling.
       # Darwin uses the -arch flag to determine output architecture.
-      -model|-arch|-isysroot|--sysroot)
-        func_append compiler_flags " $arg"
+      -model|-arch|-isysroot)
+        compiler_flags="$compiler_flags $arg"
         func_append compile_command " $arg"
         func_append finalize_command " $arg"
         prev=xcompiler
@@ -5644,12 +4577,12 @@ func_mode_link ()
         ;;
 
       -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
-        func_append compiler_flags " $arg"
+        compiler_flags="$compiler_flags $arg"
         func_append compile_command " $arg"
         func_append finalize_command " $arg"
         case "$new_inherited_linker_flags " in
             *" $arg "*) ;;
-            * ) func_append new_inherited_linker_flags " $arg" ;;
+            * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;;
         esac
         continue
         ;;
@@ -5716,17 +4649,13 @@ func_mode_link ()
         # We need an absolute path.
         case $dir in
         [\\/]* | [A-Za-z]:[\\/]*) ;;
-        =*)
-          func_stripname '=' '' "$dir"
-          dir=$lt_sysroot$func_stripname_result
-          ;;
         *)
           func_fatal_error "only absolute run-paths are allowed"
           ;;
         esac
         case "$xrpath " in
         *" $dir "*) ;;
-        *) func_append xrpath " $dir" ;;
+        *) xrpath="$xrpath $dir" ;;
         esac
         continue
         ;;
@@ -5779,8 +4708,8 @@ func_mode_link ()
         for flag in $args; do
           IFS="$save_ifs"
           func_quote_for_eval "$flag"
-          func_append arg " $func_quote_for_eval_result"
-          func_append compiler_flags " $func_quote_for_eval_result"
+          arg="$arg $wl$func_quote_for_eval_result"
+          compiler_flags="$compiler_flags $func_quote_for_eval_result"
         done
         IFS="$save_ifs"
         func_stripname ' ' '' "$arg"
@@ -5795,9 +4724,9 @@ func_mode_link ()
         for flag in $args; do
           IFS="$save_ifs"
           func_quote_for_eval "$flag"
-          func_append arg " $wl$func_quote_for_eval_result"
-          func_append compiler_flags " $wl$func_quote_for_eval_result"
-          func_append linker_flags " $func_quote_for_eval_result"
+          arg="$arg $wl$func_quote_for_eval_result"
+          compiler_flags="$compiler_flags $wl$func_quote_for_eval_result"
+          linker_flags="$linker_flags $func_quote_for_eval_result"
         done
         IFS="$save_ifs"
         func_stripname ' ' '' "$arg"
@@ -5825,27 +4754,23 @@ func_mode_link ()
         arg="$func_quote_for_eval_result"
         ;;
 
-      # Flags to be passed through unchanged, with rationale:
-      # -64, -mips[0-9]      enable 64-bit mode for the SGI compiler
-      # -r[0-9][0-9]*        specify processor for the SGI compiler
-      # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler
-      # +DA*, +DD*           enable 64-bit mode for the HP compiler
-      # -q*                  compiler args for the IBM compiler
-      # -m*, -t[45]*, -txscale* architecture-specific flags for GCC
-      # -F/path              path to uninstalled frameworks, gcc on darwin
-      # -p, -pg, --coverage, -fprofile-*  profiling flags for GCC
-      # @file                GCC response files
-      # -tp=*                Portland pgcc target processor selection
-      # --sysroot=*          for sysroot support
-      # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
+      # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
+      # -r[0-9][0-9]* specifies the processor on the SGI compiler
+      # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
+      # +DA*, +DD* enable 64-bit mode on the HP compiler
+      # -q* pass through compiler args for the IBM compiler
+      # -m*, -t[45]*, -txscale* pass through architecture-specific
+      # compiler args for GCC
+      # -F/path gives path to uninstalled frameworks, gcc on darwin
+      # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC
+      # @file GCC response files
       -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
-      -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \
-      -O*|-flto*|-fwhopr*|-fuse-linker-plugin)
+      -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*)
         func_quote_for_eval "$arg"
         arg="$func_quote_for_eval_result"
         func_append compile_command " $arg"
         func_append finalize_command " $arg"
-        func_append compiler_flags " $arg"
+        compiler_flags="$compiler_flags $arg"
         continue
         ;;
 
@@ -5857,7 +4782,7 @@ func_mode_link ()
 
       *.$objext)
         # A standard object.
-        func_append objs " $arg"
+        objs="$objs $arg"
         ;;
 
       *.lo)
@@ -5888,7 +4813,7 @@ func_mode_link ()
 
             if test "$prev" = dlfiles; then
               if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
-                func_append dlfiles " $pic_object"
+                dlfiles="$dlfiles $pic_object"
                 prev=
                 continue
               else
@@ -5900,7 +4825,7 @@ func_mode_link ()
             # CHECK ME:  I think I busted this.  -Ossama
             if test "$prev" = dlprefiles; then
               # Preload the old-style object.
-              func_append dlprefiles " $pic_object"
+              dlprefiles="$dlprefiles $pic_object"
               prev=
             fi
 
@@ -5945,25 +4870,24 @@ func_mode_link ()
 
       *.$libext)
         # An archive.
-        func_append deplibs " $arg"
-        func_append old_deplibs " $arg"
+        deplibs="$deplibs $arg"
+        old_deplibs="$old_deplibs $arg"
         continue
         ;;
 
       *.la)
         # A libtool-controlled library.
 
-        func_resolve_sysroot "$arg"
         if test "$prev" = dlfiles; then
           # This library was specified with -dlopen.
-          func_append dlfiles " $func_resolve_sysroot_result"
+          dlfiles="$dlfiles $arg"
           prev=
         elif test "$prev" = dlprefiles; then
           # The library was specified with -dlpreopen.
-          func_append dlprefiles " $func_resolve_sysroot_result"
+          dlprefiles="$dlprefiles $arg"
           prev=
         else
-          func_append deplibs " $func_resolve_sysroot_result"
+          deplibs="$deplibs $arg"
         fi
         continue
         ;;
@@ -6001,7 +4925,7 @@ func_mode_link ()
 
     if test -n "$shlibpath_var"; then
       # get the directories listed in $shlibpath_var
-      eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\`
+      eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
     else
       shlib_search_path=
     fi
@@ -6010,8 +4934,6 @@ func_mode_link ()
 
     func_dirname "$output" "/" ""
     output_objdir="$func_dirname_result$objdir"
-    func_to_tool_file "$output_objdir/"
-    tool_output_objdir=$func_to_tool_file_result
     # Create the object directory.
     func_mkdir_p "$output_objdir"
 
@@ -6032,12 +4954,12 @@ func_mode_link ()
     # Find all interdependent deplibs by searching for libraries
     # that are linked more than once (e.g. -la -lb -la)
     for deplib in $deplibs; do
-      if $opt_preserve_dup_deps ; then
+      if $opt_duplicate_deps ; then
         case "$libs " in
-        *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+        *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
         esac
       fi
-      func_append libs " $deplib"
+      libs="$libs $deplib"
     done
 
     if test "$linkmode" = lib; then
@@ -6050,9 +4972,9 @@ func_mode_link ()
       if $opt_duplicate_compiler_generated_deps; then
         for pre_post_dep in $predeps $postdeps; do
           case "$pre_post_deps " in
-          *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;;
+          *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
           esac
-          func_append pre_post_deps " $pre_post_dep"
+          pre_post_deps="$pre_post_deps $pre_post_dep"
         done
       fi
       pre_post_deps=
@@ -6122,19 +5044,17 @@ func_mode_link ()
         for lib in $dlprefiles; do
           # Ignore non-libtool-libs
           dependency_libs=
-          func_resolve_sysroot "$lib"
           case $lib in
-          *.la) func_source "$func_resolve_sysroot_result" ;;
+          *.la) func_source "$lib" ;;
           esac
 
           # Collect preopened libtool deplibs, except any this library
           # has declared as weak libs
           for deplib in $dependency_libs; do
-            func_basename "$deplib"
-            deplib_base=$func_basename_result
+            deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"`
             case " $weak_libs " in
             *" $deplib_base "*) ;;
-            *) func_append deplibs " $deplib" ;;
+            *) deplibs="$deplibs $deplib" ;;
             esac
           done
         done
@@ -6155,11 +5075,11 @@ func_mode_link ()
             compile_deplibs="$deplib $compile_deplibs"
             finalize_deplibs="$deplib $finalize_deplibs"
           else
-            func_append compiler_flags " $deplib"
+            compiler_flags="$compiler_flags $deplib"
             if test "$linkmode" = lib ; then
                 case "$new_inherited_linker_flags " in
                     *" $deplib "*) ;;
-                    * ) func_append new_inherited_linker_flags " $deplib" ;;
+                    * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
                 esac
             fi
           fi
@@ -6244,7 +5164,7 @@ func_mode_link ()
             if test "$linkmode" = lib ; then
                 case "$new_inherited_linker_flags " in
                     *" $deplib "*) ;;
-                    * ) func_append new_inherited_linker_flags " $deplib" ;;
+                    * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
                 esac
             fi
           fi
@@ -6257,8 +5177,7 @@ func_mode_link ()
             test "$pass" = conv && continue
             newdependency_libs="$deplib $newdependency_libs"
             func_stripname '-L' '' "$deplib"
-            func_resolve_sysroot "$func_stripname_result"
-            func_append newlib_search_path " $func_resolve_sysroot_result"
+            newlib_search_path="$newlib_search_path $func_stripname_result"
             ;;
           prog)
             if test "$pass" = conv; then
@@ -6272,8 +5191,7 @@ func_mode_link ()
               finalize_deplibs="$deplib $finalize_deplibs"
             fi
             func_stripname '-L' '' "$deplib"
-            func_resolve_sysroot "$func_stripname_result"
-            func_append newlib_search_path " $func_resolve_sysroot_result"
+            newlib_search_path="$newlib_search_path $func_stripname_result"
             ;;
           *)
             func_warning "\`-L' is ignored for archives/objects"
@@ -6284,21 +5202,17 @@ func_mode_link ()
         -R*)
           if test "$pass" = link; then
             func_stripname '-R' '' "$deplib"
-            func_resolve_sysroot "$func_stripname_result"
-            dir=$func_resolve_sysroot_result
+            dir=$func_stripname_result
             # Make sure the xrpath contains only unique directories.
             case "$xrpath " in
             *" $dir "*) ;;
-            *) func_append xrpath " $dir" ;;
+            *) xrpath="$xrpath $dir" ;;
             esac
           fi
           deplibs="$deplib $deplibs"
           continue
           ;;
-        *.la)
-          func_resolve_sysroot "$deplib"
-          lib=$func_resolve_sysroot_result
-          ;;
+        *.la) lib="$deplib" ;;
         *.$libext)
           if test "$pass" = conv; then
             deplibs="$deplib $deplibs"
@@ -6316,7 +5230,7 @@ func_mode_link ()
                 match_pattern*)
                   set dummy $deplibs_check_method; shift
                   match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
-                  if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \
+                  if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \
                     | $EGREP "$match_pattern_regex" > /dev/null; then
                     valid_a_lib=yes
                   fi
@@ -6326,15 +5240,15 @@ func_mode_link ()
                 ;;
               esac
               if test "$valid_a_lib" != yes; then
-                echo
+                $ECHO
                 $ECHO "*** Warning: Trying to link with static lib archive $deplib."
-                echo "*** I have the capability to make that library automatically link in when"
-                echo "*** you link to this library.  But I can only do this if you have a"
-                echo "*** shared version of the library, which you do not appear to have"
-                echo "*** because the file extensions .$libext of this argument makes me believe"
-                echo "*** that it is just a static archive that I should not use here."
+                $ECHO "*** I have the capability to make that library automatically link in when"
+                $ECHO "*** you link to this library.  But I can only do this if you have a"
+                $ECHO "*** shared version of the library, which you do not appear to have"
+                $ECHO "*** because the file extensions .$libext of this argument makes me believe"
+                $ECHO "*** that it is just a static archive that I should not use here."
               else
-                echo
+                $ECHO
                 $ECHO "*** Warning: Linking the shared library $output against the"
                 $ECHO "*** static library $deplib is not portable!"
                 deplibs="$deplib $deplibs"
@@ -6361,11 +5275,11 @@ func_mode_link ()
             if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
               # If there is no dlopen support or we're linking statically,
               # we need to preload.
-              func_append newdlprefiles " $deplib"
+              newdlprefiles="$newdlprefiles $deplib"
               compile_deplibs="$deplib $compile_deplibs"
               finalize_deplibs="$deplib $finalize_deplibs"
             else
-              func_append newdlfiles " $deplib"
+              newdlfiles="$newdlfiles $deplib"
             fi
           fi
           continue
@@ -6407,20 +5321,20 @@ func_mode_link ()
 
         # Convert "-framework foo" to "foo.ltframework"
         if test -n "$inherited_linker_flags"; then
-          tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'`
+          tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'`
           for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
             case " $new_inherited_linker_flags " in
               *" $tmp_inherited_linker_flag "*) ;;
-              *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";;
+              *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";;
             esac
           done
         fi
-        dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+        dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
         if test "$linkmode,$pass" = "lib,link" ||
            test "$linkmode,$pass" = "prog,scan" ||
            { test "$linkmode" != prog && test "$linkmode" != lib; }; then
-          test -n "$dlopen" && func_append dlfiles " $dlopen"
-          test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen"
+          test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
+          test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
         fi
 
         if test "$pass" = conv; then
@@ -6431,17 +5345,17 @@ func_mode_link ()
               func_fatal_error "cannot find name of link library for \`$lib'"
             fi
             # It is a libtool convenience library, so add in its objects.
-            func_append convenience " $ladir/$objdir/$old_library"
-            func_append old_convenience " $ladir/$objdir/$old_library"
+            convenience="$convenience $ladir/$objdir/$old_library"
+            old_convenience="$old_convenience $ladir/$objdir/$old_library"
             tmp_libs=
             for deplib in $dependency_libs; do
               deplibs="$deplib $deplibs"
-              if $opt_preserve_dup_deps ; then
+              if $opt_duplicate_deps ; then
                 case "$tmp_libs " in
-                *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+                *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
                 esac
               fi
-              func_append tmp_libs " $deplib"
+              tmp_libs="$tmp_libs $deplib"
             done
           elif test "$linkmode" != prog && test "$linkmode" != lib; then
             func_fatal_error "\`$lib' is not a convenience library"
@@ -6452,15 +5366,9 @@ func_mode_link ()
 
         # Get the name of the library we link against.
         linklib=
-        if test -n "$old_library" &&
-           { test "$prefer_static_libs" = yes ||
-             test "$prefer_static_libs,$installed" = "built,no"; }; then
-          linklib=$old_library
-        else
-          for l in $old_library $library_names; do
-            linklib="$l"
-          done
-        fi
+        for l in $old_library $library_names; do
+          linklib="$l"
+        done
         if test -z "$linklib"; then
           func_fatal_error "cannot find name of link library for \`$lib'"
         fi
@@ -6477,9 +5385,9 @@ func_mode_link ()
             # statically, we need to preload.  We also need to preload any
             # dependent libraries so libltdl's deplib preloader doesn't
             # bomb out in the load deplibs phase.
-            func_append dlprefiles " $lib $dependency_libs"
+            dlprefiles="$dlprefiles $lib $dependency_libs"
           else
-            func_append newdlfiles " $lib"
+            newdlfiles="$newdlfiles $lib"
           fi
           continue
         fi # $pass = dlopen
@@ -6501,14 +5409,14 @@ func_mode_link ()
 
         # Find the relevant object directory and library name.
         if test "X$installed" = Xyes; then
-          if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+          if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
             func_warning "library \`$lib' was moved."
             dir="$ladir"
             absdir="$abs_ladir"
             libdir="$abs_ladir"
           else
-            dir="$lt_sysroot$libdir"
-            absdir="$lt_sysroot$libdir"
+            dir="$libdir"
+            absdir="$libdir"
           fi
           test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
         else
@@ -6516,12 +5424,12 @@ func_mode_link ()
             dir="$ladir"
             absdir="$abs_ladir"
             # Remove this search path later
-            func_append notinst_path " $abs_ladir"
+            notinst_path="$notinst_path $abs_ladir"
           else
             dir="$ladir/$objdir"
             absdir="$abs_ladir/$objdir"
             # Remove this search path later
-            func_append notinst_path " $abs_ladir"
+            notinst_path="$notinst_path $abs_ladir"
           fi
         fi # $installed = yes
         func_stripname 'lib' '.la' "$laname"
@@ -6532,46 +5440,20 @@ func_mode_link ()
           if test -z "$libdir" && test "$linkmode" = prog; then
             func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
           fi
-          case "$host" in
-            # special handling for platforms with PE-DLLs.
-            *cygwin* | *mingw* | *cegcc* )
-              # Linker will automatically link against shared library if both
-              # static and shared are present.  Therefore, ensure we extract
-              # symbols from the import library if a shared library is present
-              # (otherwise, the dlopen module name will be incorrect).  We do
-              # this by putting the import library name into $newdlprefiles.
-              # We recover the dlopen module name by 'saving' the la file
-              # name in a special purpose variable, and (later) extracting the
-              # dlname from the la file.
-              if test -n "$dlname"; then
-                func_tr_sh "$dir/$linklib"
-                eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname"
-                func_append newdlprefiles " $dir/$linklib"
-              else
-                func_append newdlprefiles " $dir/$old_library"
-                # Keep a list of preopened convenience libraries to check
-                # that they are being used correctly in the link pass.
-                test -z "$libdir" && \
-                  func_append dlpreconveniencelibs " $dir/$old_library"
-              fi
-            ;;
-            * )
-              # Prefer using a static library (so that no silly _DYNAMIC symbols
-              # are required to link).
-              if test -n "$old_library"; then
-                func_append newdlprefiles " $dir/$old_library"
-                # Keep a list of preopened convenience libraries to check
-                # that they are being used correctly in the link pass.
-                test -z "$libdir" && \
-                  func_append dlpreconveniencelibs " $dir/$old_library"
-              # Otherwise, use the dlname, so that lt_dlopen finds it.
-              elif test -n "$dlname"; then
-                func_append newdlprefiles " $dir/$dlname"
-              else
-                func_append newdlprefiles " $dir/$linklib"
-              fi
-            ;;
-          esac
+          # Prefer using a static library (so that no silly _DYNAMIC symbols
+          # are required to link).
+          if test -n "$old_library"; then
+            newdlprefiles="$newdlprefiles $dir/$old_library"
+            # Keep a list of preopened convenience libraries to check
+            # that they are being used correctly in the link pass.
+            test -z "$libdir" && \
+                dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library"
+          # Otherwise, use the dlname, so that lt_dlopen finds it.
+          elif test -n "$dlname"; then
+            newdlprefiles="$newdlprefiles $dir/$dlname"
+          else
+            newdlprefiles="$newdlprefiles $dir/$linklib"
+          fi
         fi # $pass = dlpreopen
 
         if test -z "$libdir"; then
@@ -6589,7 +5471,7 @@ func_mode_link ()
 
 
         if test "$linkmode" = prog && test "$pass" != link; then
-          func_append newlib_search_path " $ladir"
+          newlib_search_path="$newlib_search_path $ladir"
           deplibs="$lib $deplibs"
 
           linkalldeplibs=no
@@ -6602,8 +5484,7 @@ func_mode_link ()
           for deplib in $dependency_libs; do
             case $deplib in
             -L*) func_stripname '-L' '' "$deplib"
-                 func_resolve_sysroot "$func_stripname_result"
-                 func_append newlib_search_path " $func_resolve_sysroot_result"
+                 newlib_search_path="$newlib_search_path $func_stripname_result"
                  ;;
             esac
             # Need to link against all dependency_libs?
@@ -6614,12 +5495,12 @@ func_mode_link ()
               # or/and link against static libraries
               newdependency_libs="$deplib $newdependency_libs"
             fi
-            if $opt_preserve_dup_deps ; then
+            if $opt_duplicate_deps ; then
               case "$tmp_libs " in
-              *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+              *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
               esac
             fi
-            func_append tmp_libs " $deplib"
+            tmp_libs="$tmp_libs $deplib"
           done # for deplib
           continue
         fi # $linkmode = prog...
@@ -6634,7 +5515,7 @@ func_mode_link ()
               # Make sure the rpath contains only unique directories.
               case "$temp_rpath:" in
               *"$absdir:"*) ;;
-              *) func_append temp_rpath "$absdir:" ;;
+              *) temp_rpath="$temp_rpath$absdir:" ;;
               esac
             fi
 
@@ -6646,7 +5527,7 @@ func_mode_link ()
             *)
               case "$compile_rpath " in
               *" $absdir "*) ;;
-              *) func_append compile_rpath " $absdir" ;;
+              *) compile_rpath="$compile_rpath $absdir"
               esac
               ;;
             esac
@@ -6655,7 +5536,7 @@ func_mode_link ()
             *)
               case "$finalize_rpath " in
               *" $libdir "*) ;;
-              *) func_append finalize_rpath " $libdir" ;;
+              *) finalize_rpath="$finalize_rpath $libdir"
               esac
               ;;
             esac
@@ -6680,12 +5561,12 @@ func_mode_link ()
           case $host in
           *cygwin* | *mingw* | *cegcc*)
               # No point in relinking DLLs because paths are not encoded
-              func_append notinst_deplibs " $lib"
+              notinst_deplibs="$notinst_deplibs $lib"
               need_relink=no
             ;;
           *)
             if test "$installed" = no; then
-              func_append notinst_deplibs " $lib"
+              notinst_deplibs="$notinst_deplibs $lib"
               need_relink=yes
             fi
             ;;
@@ -6702,7 +5583,7 @@ func_mode_link ()
             fi
           done
           if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
-            echo
+            $ECHO
             if test "$linkmode" = prog; then
               $ECHO "*** Warning: Linking the executable $output against the loadable module"
             else
@@ -6720,7 +5601,7 @@ func_mode_link ()
             *)
               case "$compile_rpath " in
               *" $absdir "*) ;;
-              *) func_append compile_rpath " $absdir" ;;
+              *) compile_rpath="$compile_rpath $absdir"
               esac
               ;;
             esac
@@ -6729,7 +5610,7 @@ func_mode_link ()
             *)
               case "$finalize_rpath " in
               *" $libdir "*) ;;
-              *) func_append finalize_rpath " $libdir" ;;
+              *) finalize_rpath="$finalize_rpath $libdir"
               esac
               ;;
             esac
@@ -6783,7 +5664,7 @@ func_mode_link ()
             linklib=$newlib
           fi # test -n "$old_archive_from_expsyms_cmds"
 
-          if test "$linkmode" = prog || test "$opt_mode" != relink; then
+          if test "$linkmode" = prog || test "$mode" != relink; then
             add_shlibpath=
             add_dir=
             add=
@@ -6805,9 +5686,9 @@ func_mode_link ()
                       if test "X$dlopenmodule" != "X$lib"; then
                         $ECHO "*** Warning: lib $linklib is a module, not a shared library"
                         if test -z "$old_library" ; then
-                          echo
-                          echo "*** And there doesn't seem to be a static archive available"
-                          echo "*** The link will probably fail, sorry"
+                          $ECHO
+                          $ECHO "*** And there doesn't seem to be a static archive available"
+                          $ECHO "*** The link will probably fail, sorry"
                         else
                           add="$dir/$old_library"
                         fi
@@ -6839,7 +5720,7 @@ func_mode_link ()
                 if test -n "$inst_prefix_dir"; then
                   case $libdir in
                     [\\/]*)
-                      func_append add_dir " -L$inst_prefix_dir$libdir"
+                      add_dir="$add_dir -L$inst_prefix_dir$libdir"
                       ;;
                   esac
                 fi
@@ -6861,7 +5742,7 @@ func_mode_link ()
             if test -n "$add_shlibpath"; then
               case :$compile_shlibpath: in
               *":$add_shlibpath:"*) ;;
-              *) func_append compile_shlibpath "$add_shlibpath:" ;;
+              *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
               esac
             fi
             if test "$linkmode" = prog; then
@@ -6875,13 +5756,13 @@ func_mode_link ()
                  test "$hardcode_shlibpath_var" = yes; then
                 case :$finalize_shlibpath: in
                 *":$libdir:"*) ;;
-                *) func_append finalize_shlibpath "$libdir:" ;;
+                *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
                 esac
               fi
             fi
           fi
 
-          if test "$linkmode" = prog || test "$opt_mode" = relink; then
+          if test "$linkmode" = prog || test "$mode" = relink; then
             add_shlibpath=
             add_dir=
             add=
@@ -6895,7 +5776,7 @@ func_mode_link ()
             elif test "$hardcode_shlibpath_var" = yes; then
               case :$finalize_shlibpath: in
               *":$libdir:"*) ;;
-              *) func_append finalize_shlibpath "$libdir:" ;;
+              *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
               esac
               add="-l$name"
             elif test "$hardcode_automatic" = yes; then
@@ -6912,7 +5793,7 @@ func_mode_link ()
               if test -n "$inst_prefix_dir"; then
                 case $libdir in
                   [\\/]*)
-                    func_append add_dir " -L$inst_prefix_dir$libdir"
+                    add_dir="$add_dir -L$inst_prefix_dir$libdir"
                     ;;
                 esac
               fi
@@ -6947,21 +5828,21 @@ func_mode_link ()
 
             # Just print a warning and add the library to dependency_libs so
             # that the program can be linked against the static library.
-            echo
+            $ECHO
             $ECHO "*** Warning: This system can not link to static lib archive $lib."
-            echo "*** I have the capability to make that library automatically link in when"
-            echo "*** you link to this library.  But I can only do this if you have a"
-            echo "*** shared version of the library, which you do not appear to have."
+            $ECHO "*** I have the capability to make that library automatically link in when"
+            $ECHO "*** you link to this library.  But I can only do this if you have a"
+            $ECHO "*** shared version of the library, which you do not appear to have."
             if test "$module" = yes; then
-              echo "*** But as you try to build a module library, libtool will still create "
-              echo "*** a static module, that should work as long as the dlopening application"
-              echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
+              $ECHO "*** But as you try to build a module library, libtool will still create "
+              $ECHO "*** a static module, that should work as long as the dlopening application"
+              $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime."
               if test -z "$global_symbol_pipe"; then
-                echo
-                echo "*** However, this would only work if libtool was able to extract symbol"
-                echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
-                echo "*** not find such a program.  So, this module is probably useless."
-                echo "*** \`nm' from GNU binutils and a full rebuild may help."
+                $ECHO
+                $ECHO "*** However, this would only work if libtool was able to extract symbol"
+                $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
+                $ECHO "*** not find such a program.  So, this module is probably useless."
+                $ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
               fi
               if test "$build_old_libs" = no; then
                 build_libtool_libs=module
@@ -6989,33 +5870,27 @@ func_mode_link ()
                    temp_xrpath=$func_stripname_result
                    case " $xrpath " in
                    *" $temp_xrpath "*) ;;
-                   *) func_append xrpath " $temp_xrpath";;
+                   *) xrpath="$xrpath $temp_xrpath";;
                    esac;;
-              *) func_append temp_deplibs " $libdir";;
+              *) temp_deplibs="$temp_deplibs $libdir";;
               esac
             done
             dependency_libs="$temp_deplibs"
           fi
 
-          func_append newlib_search_path " $absdir"
+          newlib_search_path="$newlib_search_path $absdir"
           # Link against this library
           test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
           # ... and its dependency_libs
           tmp_libs=
           for deplib in $dependency_libs; do
             newdependency_libs="$deplib $newdependency_libs"
-            case $deplib in
-              -L*) func_stripname '-L' '' "$deplib"
-                   func_resolve_sysroot "$func_stripname_result";;
-              *) func_resolve_sysroot "$deplib" ;;
-            esac
-            if $opt_preserve_dup_deps ; then
+            if $opt_duplicate_deps ; then
               case "$tmp_libs " in
-              *" $func_resolve_sysroot_result "*)
-                func_append specialdeplibs " $func_resolve_sysroot_result" ;;
+              *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
               esac
             fi
-            func_append tmp_libs " $func_resolve_sysroot_result"
+            tmp_libs="$tmp_libs $deplib"
           done
 
           if test "$link_all_deplibs" != no; then
@@ -7025,10 +5900,8 @@ func_mode_link ()
               case $deplib in
               -L*) path="$deplib" ;;
               *.la)
-                func_resolve_sysroot "$deplib"
-                deplib=$func_resolve_sysroot_result
                 func_dirname "$deplib" "" "."
-                dir=$func_dirname_result
+                dir="$func_dirname_result"
                 # We need an absolute path.
                 case $dir in
                 [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
@@ -7055,8 +5928,8 @@ func_mode_link ()
                       if test -z "$darwin_install_name"; then
                           darwin_install_name=`${OTOOL64} -L $depdepl  | awk '{if (NR == 2) {print $1;exit}}'`
                       fi
-                      func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
-                      func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}"
+                      compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
+                      linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}"
                       path=
                     fi
                   fi
@@ -7089,7 +5962,7 @@ func_mode_link ()
           compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
           finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
         else
-          compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+          compiler_flags="$compiler_flags "`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
         fi
       fi
       dependency_libs="$newdependency_libs"
@@ -7106,7 +5979,7 @@ func_mode_link ()
           for dir in $newlib_search_path; do
             case "$lib_search_path " in
             *" $dir "*) ;;
-            *) func_append lib_search_path " $dir" ;;
+            *) lib_search_path="$lib_search_path $dir" ;;
             esac
           done
           newlib_search_path=
@@ -7164,10 +6037,10 @@ func_mode_link ()
             -L*)
               case " $tmp_libs " in
               *" $deplib "*) ;;
-              *) func_append tmp_libs " $deplib" ;;
+              *) tmp_libs="$tmp_libs $deplib" ;;
               esac
               ;;
-            *) func_append tmp_libs " $deplib" ;;
+            *) tmp_libs="$tmp_libs $deplib" ;;
             esac
           done
           eval $var=\"$tmp_libs\"
@@ -7183,7 +6056,7 @@ func_mode_link ()
           ;;
         esac
         if test -n "$i" ; then
-          func_append tmp_libs " $i"
+          tmp_libs="$tmp_libs $i"
         fi
       done
       dependency_libs=$tmp_libs
@@ -7224,7 +6097,7 @@ func_mode_link ()
       # Now set the variables for building old libraries.
       build_libtool_libs=no
       oldlibs="$output"
-      func_append objs "$old_deplibs"
+      objs="$objs$old_deplibs"
       ;;
 
     lib)
@@ -7257,10 +6130,10 @@ func_mode_link ()
         if test "$deplibs_check_method" != pass_all; then
           func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
         else
-          echo
+          $ECHO
           $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
           $ECHO "*** objects $objs is not portable!"
-          func_append libobjs " $objs"
+          libobjs="$libobjs $objs"
         fi
       fi
 
@@ -7325,7 +6198,7 @@ func_mode_link ()
             age="$number_minor"
             revision="$number_revision"
             ;;
-          freebsd-aout|freebsd-elf|qnx|sunos)
+          freebsd-aout|freebsd-elf|sunos)
             current="$number_major"
             revision="$number_minor"
             age="0"
@@ -7461,7 +6334,7 @@ func_mode_link ()
           done
 
           # Make executables depend on our current version.
-          func_append verstring ":${current}.0"
+          verstring="$verstring:${current}.0"
           ;;
 
         qnx)
@@ -7529,10 +6402,10 @@ func_mode_link ()
       fi
 
       func_generate_dlsyms "$libname" "$libname" "yes"
-      func_append libobjs " $symfileobj"
+      libobjs="$libobjs $symfileobj"
       test "X$libobjs" = "X " && libobjs=
 
-      if test "$opt_mode" != relink; then
+      if test "$mode" != relink; then
         # Remove our outputs, but don't remove object files since they
         # may have been created when compiling PIC objects.
         removelist=
@@ -7548,7 +6421,7 @@ func_mode_link ()
                    continue
                  fi
                fi
-               func_append removelist " $p"
+               removelist="$removelist $p"
                ;;
             *) ;;
           esac
@@ -7559,28 +6432,27 @@ func_mode_link ()
 
       # Now set the variables for building old libraries.
       if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
-        func_append oldlibs " $output_objdir/$libname.$libext"
+        oldlibs="$oldlibs $output_objdir/$libname.$libext"
 
         # Transform .lo files to .o files.
-        oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP`
+        oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
       fi
 
       # Eliminate all temporary directories.
       #for path in $notinst_path; do
-      # lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"`
-      # deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"`
-      # dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"`
+      # lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e "s% $path % %g"`
+      # deplibs=`$ECHO "X$deplibs " | $Xsed -e "s% -L$path % %g"`
+      # dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e "s% -L$path % %g"`
       #done
 
       if test -n "$xrpath"; then
         # If the user specified any rpath flags, then add them.
         temp_xrpath=
         for libdir in $xrpath; do
-          func_replace_sysroot "$libdir"
-          func_append temp_xrpath " -R$func_replace_sysroot_result"
+          temp_xrpath="$temp_xrpath -R$libdir"
           case "$finalize_rpath " in
           *" $libdir "*) ;;
-          *) func_append finalize_rpath " $libdir" ;;
+          *) finalize_rpath="$finalize_rpath $libdir" ;;
           esac
         done
         if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
@@ -7594,7 +6466,7 @@ func_mode_link ()
       for lib in $old_dlfiles; do
         case " $dlprefiles $dlfiles " in
         *" $lib "*) ;;
-        *) func_append dlfiles " $lib" ;;
+        *) dlfiles="$dlfiles $lib" ;;
         esac
       done
 
@@ -7604,19 +6476,19 @@ func_mode_link ()
       for lib in $old_dlprefiles; do
         case "$dlprefiles " in
         *" $lib "*) ;;
-        *) func_append dlprefiles " $lib" ;;
+        *) dlprefiles="$dlprefiles $lib" ;;
         esac
       done
 
       if test "$build_libtool_libs" = yes; then
         if test -n "$rpath"; then
           case $host in
-          *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*)
+          *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc*)
             # these systems don't actually have a c library (as such)!
             ;;
           *-*-rhapsody* | *-*-darwin1.[012])
             # Rhapsody C library is in the System framework
-            func_append deplibs " System.ltframework"
+            deplibs="$deplibs System.ltframework"
             ;;
           *-*-netbsd*)
             # Don't link with libc until the a.out ld.so is fixed.
@@ -7633,7 +6505,7 @@ func_mode_link ()
           *)
             # Add libc to deplibs on all other systems if necessary.
             if test "$build_libtool_need_lc" = "yes"; then
-              func_append deplibs " -lc"
+              deplibs="$deplibs -lc"
             fi
             ;;
           esac
@@ -7682,7 +6554,7 @@ EOF
                 if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
                   case " $predeps $postdeps " in
                   *" $i "*)
-                    func_append newdeplibs " $i"
+                    newdeplibs="$newdeplibs $i"
                     i=""
                     ;;
                   esac
@@ -7693,21 +6565,21 @@ EOF
                   set dummy $deplib_matches; shift
                   deplib_match=$1
                   if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
-                    func_append newdeplibs " $i"
+                    newdeplibs="$newdeplibs $i"
                   else
                     droppeddeps=yes
-                    echo
+                    $ECHO
                     $ECHO "*** Warning: dynamic linker does not accept needed library $i."
-                    echo "*** I have the capability to make that library automatically link in when"
-                    echo "*** you link to this library.  But I can only do this if you have a"
-                    echo "*** shared version of the library, which I believe you do not have"
-                    echo "*** because a test_compile did reveal that the linker did not use it for"
-                    echo "*** its dynamic dependency list that programs get resolved with at runtime."
+                    $ECHO "*** I have the capability to make that library automatically link in when"
+                    $ECHO "*** you link to this library.  But I can only do this if you have a"
+                    $ECHO "*** shared version of the library, which I believe you do not have"
+                    $ECHO "*** because a test_compile did reveal that the linker did not use it for"
+                    $ECHO "*** its dynamic dependency list that programs get resolved with at runtime."
                   fi
                 fi
                 ;;
               *)
-                func_append newdeplibs " $i"
+                newdeplibs="$newdeplibs $i"
                 ;;
               esac
             done
@@ -7725,7 +6597,7 @@ EOF
                   if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
                     case " $predeps $postdeps " in
                     *" $i "*)
-                      func_append newdeplibs " $i"
+                      newdeplibs="$newdeplibs $i"
                       i=""
                       ;;
                     esac
@@ -7736,29 +6608,29 @@ EOF
                     set dummy $deplib_matches; shift
                     deplib_match=$1
                     if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
-                      func_append newdeplibs " $i"
+                      newdeplibs="$newdeplibs $i"
                     else
                       droppeddeps=yes
-                      echo
+                      $ECHO
                       $ECHO "*** Warning: dynamic linker does not accept needed library $i."
-                      echo "*** I have the capability to make that library automatically link in when"
-                      echo "*** you link to this library.  But I can only do this if you have a"
-                      echo "*** shared version of the library, which you do not appear to have"
-                      echo "*** because a test_compile did reveal that the linker did not use this one"
-                      echo "*** as a dynamic dependency that programs can get resolved with at runtime."
+                      $ECHO "*** I have the capability to make that library automatically link in when"
+                      $ECHO "*** you link to this library.  But I can only do this if you have a"
+                      $ECHO "*** shared version of the library, which you do not appear to have"
+                      $ECHO "*** because a test_compile did reveal that the linker did not use this one"
+                      $ECHO "*** as a dynamic dependency that programs can get resolved with at runtime."
                     fi
                   fi
                 else
                   droppeddeps=yes
-                  echo
+                  $ECHO
                   $ECHO "*** Warning!  Library $i is needed by this library but I was not able to"
-                  echo "*** make it link in!  You will probably need to install it or some"
-                  echo "*** library that it depends on before this library will be fully"
-                  echo "*** functional.  Installing it before continuing would be even better."
+                  $ECHO "*** make it link in!  You will probably need to install it or some"
+                  $ECHO "*** library that it depends on before this library will be fully"
+                  $ECHO "*** functional.  Installing it before continuing would be even better."
                 fi
                 ;;
               *)
-                func_append newdeplibs " $i"
+                newdeplibs="$newdeplibs $i"
                 ;;
               esac
             done
@@ -7775,27 +6647,15 @@ EOF
               if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
                 case " $predeps $postdeps " in
                 *" $a_deplib "*)
-                  func_append newdeplibs " $a_deplib"
+                  newdeplibs="$newdeplibs $a_deplib"
                   a_deplib=""
                   ;;
                 esac
               fi
               if test -n "$a_deplib" ; then
                 libname=`eval "\\$ECHO \"$libname_spec\""`
-                if test -n "$file_magic_glob"; then
-                  libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob`
-                else
-                  libnameglob=$libname
-                fi
-                test "$want_nocaseglob" = yes && nocaseglob=`shopt -p nocaseglob`
                 for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
-                  if test "$want_nocaseglob" = yes; then
-                    shopt -s nocaseglob
-                    potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
-                    $nocaseglob
-                  else
-                    potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
-                  fi
+                  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
                   for potent_lib in $potential_libs; do
                       # Follow soft links.
                       if ls -lLd "$potent_lib" 2>/dev/null |
@@ -7812,13 +6672,13 @@ EOF
                         potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
                         case $potliblink in
                         [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
-                        *) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";;
+                        *) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
                         esac
                       done
                       if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
                          $SED -e 10q |
                          $EGREP "$file_magic_regex" > /dev/null; then
-                        func_append newdeplibs " $a_deplib"
+                        newdeplibs="$newdeplibs $a_deplib"
                         a_deplib=""
                         break 2
                       fi
@@ -7827,12 +6687,12 @@ EOF
               fi
               if test -n "$a_deplib" ; then
                 droppeddeps=yes
-                echo
+                $ECHO
                 $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
-                echo "*** I have the capability to make that library automatically link in when"
-                echo "*** you link to this library.  But I can only do this if you have a"
-                echo "*** shared version of the library, which you do not appear to have"
-                echo "*** because I did check the linker path looking for a file starting"
+                $ECHO "*** I have the capability to make that library automatically link in when"
+                $ECHO "*** you link to this library.  But I can only do this if you have a"
+                $ECHO "*** shared version of the library, which you do not appear to have"
+                $ECHO "*** because I did check the linker path looking for a file starting"
                 if test -z "$potlib" ; then
                   $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
                 else
@@ -7843,7 +6703,7 @@ EOF
               ;;
             *)
               # Add a -L argument.
-              func_append newdeplibs " $a_deplib"
+              newdeplibs="$newdeplibs $a_deplib"
               ;;
             esac
           done # Gone through all deplibs.
@@ -7859,7 +6719,7 @@ EOF
               if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
                 case " $predeps $postdeps " in
                 *" $a_deplib "*)
-                  func_append newdeplibs " $a_deplib"
+                  newdeplibs="$newdeplibs $a_deplib"
                   a_deplib=""
                   ;;
                 esac
@@ -7870,9 +6730,9 @@ EOF
                   potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
                   for potent_lib in $potential_libs; do
                     potlib="$potent_lib" # see symlink-check above in file_magic test
-                    if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \
+                    if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \
                        $EGREP "$match_pattern_regex" > /dev/null; then
-                      func_append newdeplibs " $a_deplib"
+                      newdeplibs="$newdeplibs $a_deplib"
                       a_deplib=""
                       break 2
                     fi
@@ -7881,12 +6741,12 @@ EOF
               fi
               if test -n "$a_deplib" ; then
                 droppeddeps=yes
-                echo
+                $ECHO
                 $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
-                echo "*** I have the capability to make that library automatically link in when"
-                echo "*** you link to this library.  But I can only do this if you have a"
-                echo "*** shared version of the library, which you do not appear to have"
-                echo "*** because I did check the linker path looking for a file starting"
+                $ECHO "*** I have the capability to make that library automatically link in when"
+                $ECHO "*** you link to this library.  But I can only do this if you have a"
+                $ECHO "*** shared version of the library, which you do not appear to have"
+                $ECHO "*** because I did check the linker path looking for a file starting"
                 if test -z "$potlib" ; then
                   $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
                 else
@@ -7897,32 +6757,32 @@ EOF
               ;;
             *)
               # Add a -L argument.
-              func_append newdeplibs " $a_deplib"
+              newdeplibs="$newdeplibs $a_deplib"
               ;;
             esac
           done # Gone through all deplibs.
           ;;
         none | unknown | *)
           newdeplibs=""
-          tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'`
+          tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \
+              -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'`
           if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
             for i in $predeps $postdeps ; do
               # can't use Xsed below, because $i might contain '/'
-              tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"`
+              tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"`
             done
           fi
-          case $tmp_deplibs in
-          *[!\  \ ]*)
-            echo
+          if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[      ]//g' |
+             $GREP . >/dev/null; then
+            $ECHO
             if test "X$deplibs_check_method" = "Xnone"; then
-              echo "*** Warning: inter-library dependencies are not supported in this platform."
+              $ECHO "*** Warning: inter-library dependencies are not supported in this platform."
             else
-              echo "*** Warning: inter-library dependencies are not known to be supported."
+              $ECHO "*** Warning: inter-library dependencies are not known to be supported."
             fi
-            echo "*** All declared inter-library dependencies are being dropped."
+            $ECHO "*** All declared inter-library dependencies are being dropped."
             droppeddeps=yes
-            ;;
-          esac
+          fi
           ;;
         esac
         versuffix=$versuffix_save
@@ -7934,23 +6794,23 @@ EOF
         case $host in
         *-*-rhapsody* | *-*-darwin1.[012])
           # On Rhapsody replace the C library with the System framework
-          newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'`
+          newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
           ;;
         esac
 
         if test "$droppeddeps" = yes; then
           if test "$module" = yes; then
-            echo
-            echo "*** Warning: libtool could not satisfy all declared inter-library"
+            $ECHO
+            $ECHO "*** Warning: libtool could not satisfy all declared inter-library"
             $ECHO "*** dependencies of module $libname.  Therefore, libtool will create"
-            echo "*** a static module, that should work as long as the dlopening"
-            echo "*** application is linked with the -dlopen flag."
+            $ECHO "*** a static module, that should work as long as the dlopening"
+            $ECHO "*** application is linked with the -dlopen flag."
             if test -z "$global_symbol_pipe"; then
-              echo
-              echo "*** However, this would only work if libtool was able to extract symbol"
-              echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
-              echo "*** not find such a program.  So, this module is probably useless."
-              echo "*** \`nm' from GNU binutils and a full rebuild may help."
+              $ECHO
+              $ECHO "*** However, this would only work if libtool was able to extract symbol"
+              $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
+              $ECHO "*** not find such a program.  So, this module is probably useless."
+              $ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
             fi
             if test "$build_old_libs" = no; then
               oldlibs="$output_objdir/$libname.$libext"
@@ -7960,16 +6820,16 @@ EOF
               build_libtool_libs=no
             fi
           else
-            echo "*** The inter-library dependencies that have been dropped here will be"
-            echo "*** automatically added whenever a program is linked with this library"
-            echo "*** or is declared to -dlopen it."
+            $ECHO "*** The inter-library dependencies that have been dropped here will be"
+            $ECHO "*** automatically added whenever a program is linked with this library"
+            $ECHO "*** or is declared to -dlopen it."
 
             if test "$allow_undefined" = no; then
-              echo
-              echo "*** Since this library must not contain undefined symbols,"
-              echo "*** because either the platform does not support them or"
-              echo "*** it was explicitly requested with -no-undefined,"
-              echo "*** libtool will only create a static version of it."
+              $ECHO
+              $ECHO "*** Since this library must not contain undefined symbols,"
+              $ECHO "*** because either the platform does not support them or"
+              $ECHO "*** it was explicitly requested with -no-undefined,"
+              $ECHO "*** libtool will only create a static version of it."
               if test "$build_old_libs" = no; then
                 oldlibs="$output_objdir/$libname.$libext"
                 build_libtool_libs=module
@@ -7986,9 +6846,9 @@ EOF
       # Time to change all our "foo.ltframework" stuff back to "-framework foo"
       case $host in
         *-*-darwin*)
-          newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
-          new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
-          deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+          newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+          new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+          deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
           ;;
       esac
 
@@ -8001,7 +6861,7 @@ EOF
         *)
           case " $deplibs " in
           *" -L$path/$objdir "*)
-            func_append new_libs " -L$path/$objdir" ;;
+            new_libs="$new_libs -L$path/$objdir" ;;
           esac
           ;;
         esac
@@ -8011,10 +6871,10 @@ EOF
         -L*)
           case " $new_libs " in
           *" $deplib "*) ;;
-          *) func_append new_libs " $deplib" ;;
+          *) new_libs="$new_libs $deplib" ;;
           esac
           ;;
-        *) func_append new_libs " $deplib" ;;
+        *) new_libs="$new_libs $deplib" ;;
         esac
       done
       deplibs="$new_libs"
@@ -8031,12 +6891,10 @@ EOF
           hardcode_libdirs=
           dep_rpath=
           rpath="$finalize_rpath"
-          test "$opt_mode" != relink && rpath="$compile_rpath$rpath"
+          test "$mode" != relink && rpath="$compile_rpath$rpath"
           for libdir in $rpath; do
             if test -n "$hardcode_libdir_flag_spec"; then
               if test -n "$hardcode_libdir_separator"; then
-                func_replace_sysroot "$libdir"
-                libdir=$func_replace_sysroot_result
                 if test -z "$hardcode_libdirs"; then
                   hardcode_libdirs="$libdir"
                 else
@@ -8045,18 +6903,18 @@ EOF
                   *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
                     ;;
                   *)
-                    func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+                    hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
                     ;;
                   esac
                 fi
               else
                 eval flag=\"$hardcode_libdir_flag_spec\"
-                func_append dep_rpath " $flag"
+                dep_rpath="$dep_rpath $flag"
               fi
             elif test -n "$runpath_var"; then
               case "$perm_rpath " in
               *" $libdir "*) ;;
-              *) func_apped perm_rpath " $libdir" ;;
+              *) perm_rpath="$perm_rpath $libdir" ;;
               esac
             fi
           done
@@ -8074,7 +6932,7 @@ EOF
             # We should set the runpath_var.
             rpath=
             for dir in $perm_rpath; do
-              func_append rpath "$dir:"
+              rpath="$rpath$dir:"
             done
             eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
           fi
@@ -8082,7 +6940,7 @@ EOF
         fi
 
         shlibpath="$finalize_shlibpath"
-        test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
+        test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
         if test -n "$shlibpath"; then
           eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
         fi
@@ -8108,18 +6966,18 @@ EOF
         linknames=
         for link
         do
-          func_append linknames " $link"
+          linknames="$linknames $link"
         done
 
         # Use standard objects if they are pic
-        test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP`
+        test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
         test "X$libobjs" = "X " && libobjs=
 
         delfiles=
         if test -n "$export_symbols" && test -n "$include_expsyms"; then
           $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
           export_symbols="$output_objdir/$libname.uexp"
-          func_append delfiles " $export_symbols"
+          delfiles="$delfiles $export_symbols"
         fi
 
         orig_export_symbols=
@@ -8150,45 +7008,13 @@ EOF
             $opt_dry_run || $RM $export_symbols
             cmds=$export_symbols_cmds
             save_ifs="$IFS"; IFS='~'
-            for cmd1 in $cmds; do
+            for cmd in $cmds; do
               IFS="$save_ifs"
-              # Take the normal branch if the nm_file_list_spec branch
-              # doesn't work or if tool conversion is not needed.
-              case $nm_file_list_spec~$to_tool_file_cmd in
-                *~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*)
-                  try_normal_branch=yes
-                  eval cmd=\"$cmd1\"
-                  func_len " $cmd"
-                  len=$func_len_result
-                  ;;
-                *)
-                  try_normal_branch=no
-                  ;;
-              esac
-              if test "$try_normal_branch" = yes \
-                 && { test "$len" -lt "$max_cmd_len" \
-                      || test "$max_cmd_len" -le -1; }
-              then
-                func_show_eval "$cmd" 'exit $?'
-                skipped_export=false
-              elif test -n "$nm_file_list_spec"; then
-                func_basename "$output"
-                output_la=$func_basename_result
-                save_libobjs=$libobjs
-                save_output=$output
-                output=${output_objdir}/${output_la}.nm
-                func_to_tool_file "$output"
-                libobjs=$nm_file_list_spec$func_to_tool_file_result
-                func_append delfiles " $output"
-                func_verbose "creating $NM input file list: $output"
-                for obj in $save_libobjs; do
-                  func_to_tool_file "$obj"
-                  $ECHO "$func_to_tool_file_result"
-                done > "$output"
-                eval cmd=\"$cmd1\"
+              eval cmd=\"$cmd\"
+              func_len " $cmd"
+              len=$func_len_result
+              if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
                 func_show_eval "$cmd" 'exit $?'
-                output=$save_output
-                libobjs=$save_libobjs
                 skipped_export=false
               else
                 # The command line is too long to execute in one step.
@@ -8210,7 +7036,7 @@ EOF
         if test -n "$export_symbols" && test -n "$include_expsyms"; then
           tmp_export_symbols="$export_symbols"
           test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
-          $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
+          $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
         fi
 
         if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
@@ -8222,7 +7048,7 @@ EOF
           # global variables. join(1) would be nice here, but unfortunately
           # isn't a blessed tool.
           $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
-          func_append delfiles " $export_symbols $output_objdir/$libname.filter"
+          delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
           export_symbols=$output_objdir/$libname.def
           $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
         fi
@@ -8232,7 +7058,7 @@ EOF
           case " $convenience " in
           *" $test_deplib "*) ;;
           *)
-            func_append tmp_deplibs " $test_deplib"
+            tmp_deplibs="$tmp_deplibs $test_deplib"
             ;;
           esac
         done
@@ -8252,21 +7078,21 @@ EOF
             test "X$libobjs" = "X " && libobjs=
           else
             gentop="$output_objdir/${outputname}x"
-            func_append generated " $gentop"
+            generated="$generated $gentop"
 
             func_extract_archives $gentop $convenience
-            func_append libobjs " $func_extract_archives_result"
+            libobjs="$libobjs $func_extract_archives_result"
             test "X$libobjs" = "X " && libobjs=
           fi
         fi
 
         if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
           eval flag=\"$thread_safe_flag_spec\"
-          func_append linker_flags " $flag"
+          linker_flags="$linker_flags $flag"
         fi
 
         # Make a backup of the uninstalled library when relinking
-        if test "$opt_mode" = relink; then
+        if test "$mode" = relink; then
           $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
         fi
 
@@ -8311,8 +7137,7 @@ EOF
             save_libobjs=$libobjs
           fi
           save_output=$output
-          func_basename "$output"
-          output_la=$func_basename_result
+          output_la=`$ECHO "X$output" | $Xsed -e "$basename"`
 
           # Clear the reloadable object creation command queue and
           # initialize k to one.
@@ -8325,16 +7150,13 @@ EOF
           if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
             output=${output_objdir}/${output_la}.lnkscript
             func_verbose "creating GNU ld script: $output"
-            echo 'INPUT (' > $output
+            $ECHO 'INPUT (' > $output
             for obj in $save_libobjs
             do
-              func_to_tool_file "$obj"
-              $ECHO "$func_to_tool_file_result" >> $output
+              $ECHO "$obj" >> $output
             done
-            echo ')' >> $output
-            func_append delfiles " $output"
-            func_to_tool_file "$output"
-            output=$func_to_tool_file_result
+            $ECHO ')' >> $output
+            delfiles="$delfiles $output"
           elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
             output=${output_objdir}/${output_la}.lnk
             func_verbose "creating linker input file list: $output"
@@ -8348,12 +7170,10 @@ EOF
             fi
             for obj
             do
-              func_to_tool_file "$obj"
-              $ECHO "$func_to_tool_file_result" >> $output
+              $ECHO "$obj" >> $output
             done
-            func_append delfiles " $output"
-            func_to_tool_file "$output"
-            output=$firstobj\"$file_list_spec$func_to_tool_file_result\"
+            delfiles="$delfiles $output"
+            output=$firstobj\"$file_list_spec$output\"
           else
             if test -n "$save_libobjs"; then
               func_verbose "creating reloadable object files..."
@@ -8377,19 +7197,17 @@ EOF
                   # command to the queue.
                   if test "$k" -eq 1 ; then
                     # The first file doesn't have a previous command to add.
-                    reload_objs=$objlist
-                    eval concat_cmds=\"$reload_cmds\"
+                    eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
                   else
                     # All subsequent reloadable object files will link in
                     # the last one created.
-                    reload_objs="$objlist $last_robj"
-                    eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\"
+                    eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj~\$RM $last_robj\"
                   fi
                   last_robj=$output_objdir/$output_la-${k}.$objext
                   func_arith $k + 1
                   k=$func_arith_result
                   output=$output_objdir/$output_la-${k}.$objext
-                  objlist=" $obj"
+                  objlist=$obj
                   func_len " $last_robj"
                   func_arith $len0 + $func_len_result
                   len=$func_arith_result
@@ -8399,12 +7217,11 @@ EOF
               # reloadable object file.  All subsequent reloadable object
               # files will link in the last one created.
               test -z "$concat_cmds" || concat_cmds=$concat_cmds~
-              reload_objs="$objlist $last_robj"
-              eval concat_cmds=\"\${concat_cmds}$reload_cmds\"
+              eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
               if test -n "$last_robj"; then
                 eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
               fi
-              func_append delfiles " $output"
+              delfiles="$delfiles $output"
 
             else
               output=
@@ -8438,7 +7255,7 @@ EOF
                 lt_exit=$?
 
                 # Restore the uninstalled library and exit
-                if test "$opt_mode" = relink; then
+                if test "$mode" = relink; then
                   ( cd "$output_objdir" && \
                     $RM "${realname}T" && \
                     $MV "${realname}U" "$realname" )
@@ -8459,7 +7276,7 @@ EOF
             if test -n "$export_symbols" && test -n "$include_expsyms"; then
               tmp_export_symbols="$export_symbols"
               test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
-              $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
+              $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
             fi
 
             if test -n "$orig_export_symbols"; then
@@ -8471,7 +7288,7 @@ EOF
               # global variables. join(1) would be nice here, but unfortunately
               # isn't a blessed tool.
               $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
-              func_append delfiles " $export_symbols $output_objdir/$libname.filter"
+              delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
               export_symbols=$output_objdir/$libname.def
               $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
             fi
@@ -8512,10 +7329,10 @@ EOF
         # Add any objects from preloaded convenience libraries
         if test -n "$dlprefiles"; then
           gentop="$output_objdir/${outputname}x"
-          func_append generated " $gentop"
+          generated="$generated $gentop"
 
           func_extract_archives $gentop $dlprefiles
-          func_append libobjs " $func_extract_archives_result"
+          libobjs="$libobjs $func_extract_archives_result"
           test "X$libobjs" = "X " && libobjs=
         fi
 
@@ -8531,7 +7348,7 @@ EOF
             lt_exit=$?
 
             # Restore the uninstalled library and exit
-            if test "$opt_mode" = relink; then
+            if test "$mode" = relink; then
               ( cd "$output_objdir" && \
                 $RM "${realname}T" && \
                 $MV "${realname}U" "$realname" )
@@ -8543,7 +7360,7 @@ EOF
         IFS="$save_ifs"
 
         # Restore the uninstalled library and exit
-        if test "$opt_mode" = relink; then
+        if test "$mode" = relink; then
           $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
 
           if test -n "$convenience"; then
@@ -8624,21 +7441,18 @@ EOF
       if test -n "$convenience"; then
         if test -n "$whole_archive_flag_spec"; then
           eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
-          reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
+          reload_conv_objs=$reload_objs\ `$ECHO "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'`
         else
           gentop="$output_objdir/${obj}x"
-          func_append generated " $gentop"
+          generated="$generated $gentop"
 
           func_extract_archives $gentop $convenience
           reload_conv_objs="$reload_objs $func_extract_archives_result"
         fi
       fi
 
-      # If we're not building shared, we need to use non_pic_objs
-      test "$build_libtool_libs" != yes && libobjs="$non_pic_objects"
-
       # Create the old-style object.
-      reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
+      reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
 
       output="$obj"
       func_execute_cmds "$reload_cmds" 'exit $?'
@@ -8698,8 +7512,8 @@ EOF
       case $host in
       *-*-rhapsody* | *-*-darwin1.[012])
         # On Rhapsody replace the C library is the System framework
-        compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'`
-        finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'`
+        compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
+        finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
         ;;
       esac
 
@@ -8710,14 +7524,14 @@ EOF
         if test "$tagname" = CXX ; then
           case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
             10.[0123])
-              func_append compile_command " ${wl}-bind_at_load"
-              func_append finalize_command " ${wl}-bind_at_load"
+              compile_command="$compile_command ${wl}-bind_at_load"
+              finalize_command="$finalize_command ${wl}-bind_at_load"
             ;;
           esac
         fi
         # Time to change all our "foo.ltframework" stuff back to "-framework foo"
-        compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
-        finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+        compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+        finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
         ;;
       esac
 
@@ -8731,7 +7545,7 @@ EOF
         *)
           case " $compile_deplibs " in
           *" -L$path/$objdir "*)
-            func_append new_libs " -L$path/$objdir" ;;
+            new_libs="$new_libs -L$path/$objdir" ;;
           esac
           ;;
         esac
@@ -8741,17 +7555,17 @@ EOF
         -L*)
           case " $new_libs " in
           *" $deplib "*) ;;
-          *) func_append new_libs " $deplib" ;;
+          *) new_libs="$new_libs $deplib" ;;
           esac
           ;;
-        *) func_append new_libs " $deplib" ;;
+        *) new_libs="$new_libs $deplib" ;;
         esac
       done
       compile_deplibs="$new_libs"
 
 
-      func_append compile_command " $compile_deplibs"
-      func_append finalize_command " $finalize_deplibs"
+      compile_command="$compile_command $compile_deplibs"
+      finalize_command="$finalize_command $finalize_deplibs"
 
       if test -n "$rpath$xrpath"; then
         # If the user specified any rpath flags, then add them.
@@ -8759,7 +7573,7 @@ EOF
           # This is the magic to use -rpath.
           case "$finalize_rpath " in
           *" $libdir "*) ;;
-          *) func_append finalize_rpath " $libdir" ;;
+          *) finalize_rpath="$finalize_rpath $libdir" ;;
           esac
         done
       fi
@@ -8778,18 +7592,18 @@ EOF
               *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
                 ;;
               *)
-                func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+                hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
                 ;;
               esac
             fi
           else
             eval flag=\"$hardcode_libdir_flag_spec\"
-            func_append rpath " $flag"
+            rpath="$rpath $flag"
           fi
         elif test -n "$runpath_var"; then
           case "$perm_rpath " in
           *" $libdir "*) ;;
-          *) func_append perm_rpath " $libdir" ;;
+          *) perm_rpath="$perm_rpath $libdir" ;;
           esac
         fi
         case $host in
@@ -8798,12 +7612,12 @@ EOF
           case :$dllsearchpath: in
           *":$libdir:"*) ;;
           ::) dllsearchpath=$libdir;;
-          *) func_append dllsearchpath ":$libdir";;
+          *) dllsearchpath="$dllsearchpath:$libdir";;
           esac
           case :$dllsearchpath: in
           *":$testbindir:"*) ;;
           ::) dllsearchpath=$testbindir;;
-          *) func_append dllsearchpath ":$testbindir";;
+          *) dllsearchpath="$dllsearchpath:$testbindir";;
           esac
           ;;
         esac
@@ -8829,18 +7643,18 @@ EOF
               *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
                 ;;
               *)
-                func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+                hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
                 ;;
               esac
             fi
           else
             eval flag=\"$hardcode_libdir_flag_spec\"
-            func_append rpath " $flag"
+            rpath="$rpath $flag"
           fi
         elif test -n "$runpath_var"; then
           case "$finalize_perm_rpath " in
           *" $libdir "*) ;;
-          *) func_append finalize_perm_rpath " $libdir" ;;
+          *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
           esac
         fi
       done
@@ -8854,8 +7668,8 @@ EOF
 
       if test -n "$libobjs" && test "$build_old_libs" = yes; then
         # Transform all the library objects into standard objects.
-        compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
-        finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
+        compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+        finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
       fi
 
       func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
@@ -8867,15 +7681,15 @@ EOF
 
       wrappers_required=yes
       case $host in
-      *cegcc* | *mingw32ce*)
-        # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway.
-        wrappers_required=no
-        ;;
       *cygwin* | *mingw* )
         if test "$build_libtool_libs" != yes; then
           wrappers_required=no
         fi
         ;;
+      *cegcc)
+        # Disable wrappers for cegcc, we are cross compiling anyway.
+        wrappers_required=no
+        ;;
       *)
         if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
           wrappers_required=no
@@ -8884,19 +7698,13 @@ EOF
       esac
       if test "$wrappers_required" = no; then
         # Replace the output file specification.
-        compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
+        compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
         link_command="$compile_command$compile_rpath"
 
         # We have no uninstalled library dependencies, so finalize right now.
         exit_status=0
         func_show_eval "$link_command" 'exit_status=$?'
 
-        if test -n "$postlink_cmds"; then
-          func_to_tool_file "$output"
-          postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
-          func_execute_cmds "$postlink_cmds" 'exit $?'
-        fi
-
         # Delete the generated files.
         if test -f "$output_objdir/${outputname}S.${objext}"; then
           func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
@@ -8919,7 +7727,7 @@ EOF
           # We should set the runpath_var.
           rpath=
           for dir in $perm_rpath; do
-            func_append rpath "$dir:"
+            rpath="$rpath$dir:"
           done
           compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
         fi
@@ -8927,7 +7735,7 @@ EOF
           # We should set the runpath_var.
           rpath=
           for dir in $finalize_perm_rpath; do
-            func_append rpath "$dir:"
+            rpath="$rpath$dir:"
           done
           finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
         fi
@@ -8937,18 +7745,11 @@ EOF
         # We don't need to create a wrapper script.
         link_command="$compile_var$compile_command$compile_rpath"
         # Replace the output file specification.
-        link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
+        link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
         # Delete the old output file.
         $opt_dry_run || $RM $output
         # Link the executable and exit
         func_show_eval "$link_command" 'exit $?'
-
-        if test -n "$postlink_cmds"; then
-          func_to_tool_file "$output"
-          postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
-          func_execute_cmds "$postlink_cmds" 'exit $?'
-        fi
-
         exit $EXIT_SUCCESS
       fi
 
@@ -8963,7 +7764,7 @@ EOF
         if test "$fast_install" != no; then
           link_command="$finalize_var$compile_command$finalize_rpath"
           if test "$fast_install" = yes; then
-            relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
+            relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
           else
             # fast_install is set to needless
             relink_command=
@@ -8975,19 +7776,13 @@ EOF
       fi
 
       # Replace the output file specification.
-      link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+      link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
 
       # Delete the old output files.
       $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
 
       func_show_eval "$link_command" 'exit $?'
 
-      if test -n "$postlink_cmds"; then
-        func_to_tool_file "$output_objdir/$outputname"
-        postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
-        func_execute_cmds "$postlink_cmds" 'exit $?'
-      fi
-
       # Now create the wrapper script.
       func_verbose "creating $output"
 
@@ -9005,7 +7800,18 @@ EOF
           fi
         done
         relink_command="(cd `pwd`; $relink_command)"
-        relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
+        relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+      fi
+
+      # Quote $ECHO for shipping.
+      if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then
+        case $progpath in
+        [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
+        *) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
+        esac
+        qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"`
+      else
+        qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"`
       fi
 
       # Only actually do things if not in dry run mode.
@@ -9085,7 +7891,7 @@ EOF
         else
           oldobjs="$old_deplibs $non_pic_objects"
           if test "$preload" = yes && test -f "$symfileobj"; then
-            func_append oldobjs " $symfileobj"
+            oldobjs="$oldobjs $symfileobj"
           fi
         fi
         addlibs="$old_convenience"
@@ -9093,10 +7899,10 @@ EOF
 
       if test -n "$addlibs"; then
         gentop="$output_objdir/${outputname}x"
-        func_append generated " $gentop"
+        generated="$generated $gentop"
 
         func_extract_archives $gentop $addlibs
-        func_append oldobjs " $func_extract_archives_result"
+        oldobjs="$oldobjs $func_extract_archives_result"
       fi
 
       # Do each command in the archive commands.
@@ -9107,10 +7913,10 @@ EOF
         # Add any objects from preloaded convenience libraries
         if test -n "$dlprefiles"; then
           gentop="$output_objdir/${outputname}x"
-          func_append generated " $gentop"
+          generated="$generated $gentop"
 
           func_extract_archives $gentop $dlprefiles
-          func_append oldobjs " $func_extract_archives_result"
+          oldobjs="$oldobjs $func_extract_archives_result"
         fi
 
         # POSIX demands no paths to be encoded in archives.  We have
@@ -9126,9 +7932,9 @@ EOF
             done | sort | sort -uc >/dev/null 2>&1); then
           :
         else
-          echo "copying selected object files to avoid basename conflicts..."
+          $ECHO "copying selected object files to avoid basename conflicts..."
           gentop="$output_objdir/${outputname}x"
-          func_append generated " $gentop"
+          generated="$generated $gentop"
           func_mkdir_p "$gentop"
           save_oldobjs=$oldobjs
           oldobjs=
@@ -9152,9 +7958,9 @@ EOF
                 esac
               done
               func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
-              func_append oldobjs " $gentop/$newobj"
+              oldobjs="$oldobjs $gentop/$newobj"
               ;;
-            *) func_append oldobjs " $obj" ;;
+            *) oldobjs="$oldobjs $obj" ;;
             esac
           done
         fi
@@ -9164,16 +7970,6 @@ EOF
         len=$func_len_result
         if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
           cmds=$old_archive_cmds
-        elif test -n "$archiver_list_spec"; then
-          func_verbose "using command file archive linking..."
-          for obj in $oldobjs
-          do
-            func_to_tool_file "$obj"
-            $ECHO "$func_to_tool_file_result"
-          done > $output_objdir/$libname.libcmd
-          func_to_tool_file "$output_objdir/$libname.libcmd"
-          oldobjs=" $archiver_list_spec$func_to_tool_file_result"
-          cmds=$old_archive_cmds
         else
           # the command line is too long to link in one step, link in parts
           func_verbose "using piecewise archive linking..."
@@ -9247,7 +8043,7 @@ EOF
       done
       # Quote the link command for shipping.
       relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
-      relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
+      relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
       if test "$hardcode_automatic" = yes ; then
         relink_command=
       fi
@@ -9270,19 +8066,9 @@ EOF
                 eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
                 test -z "$libdir" && \
                   func_fatal_error "\`$deplib' is not a valid libtool archive"
-                func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name"
-                ;;
-              -L*)
-                func_stripname -L '' "$deplib"
-                func_replace_sysroot "$func_stripname_result"
-                func_append newdependency_libs " -L$func_replace_sysroot_result"
-                ;;
-              -R*)
-                func_stripname -R '' "$deplib"
-                func_replace_sysroot "$func_stripname_result"
-                func_append newdependency_libs " -R$func_replace_sysroot_result"
+                newdependency_libs="$newdependency_libs $libdir/$name"
                 ;;
-              *) func_append newdependency_libs " $deplib" ;;
+              *) newdependency_libs="$newdependency_libs $deplib" ;;
               esac
             done
             dependency_libs="$newdependency_libs"
@@ -9296,9 +8082,9 @@ EOF
                 eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
                 test -z "$libdir" && \
                   func_fatal_error "\`$lib' is not a valid libtool archive"
-                func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name"
+                newdlfiles="$newdlfiles $libdir/$name"
                 ;;
-              *) func_append newdlfiles " $lib" ;;
+              *) newdlfiles="$newdlfiles $lib" ;;
               esac
             done
             dlfiles="$newdlfiles"
@@ -9315,7 +8101,7 @@ EOF
                 eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
                 test -z "$libdir" && \
                   func_fatal_error "\`$lib' is not a valid libtool archive"
-                func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name"
+                newdlprefiles="$newdlprefiles $libdir/$name"
                 ;;
               esac
             done
@@ -9327,7 +8113,7 @@ EOF
                 [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
                 *) abs=`pwd`"/$lib" ;;
               esac
-              func_append newdlfiles " $abs"
+              newdlfiles="$newdlfiles $abs"
             done
             dlfiles="$newdlfiles"
             newdlprefiles=
@@ -9336,33 +8122,15 @@ EOF
                 [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
                 *) abs=`pwd`"/$lib" ;;
               esac
-              func_append newdlprefiles " $abs"
+              newdlprefiles="$newdlprefiles $abs"
             done
             dlprefiles="$newdlprefiles"
           fi
           $RM $output
           # place dlname in correct position for cygwin
-          # In fact, it would be nice if we could use this code for all target
-          # systems that can't hard-code library paths into their executables
-          # and that have no shared library path variable independent of PATH,
-          # but it turns out we can't easily determine that from inspecting
-          # libtool variables, so we have to hard-code the OSs to which it
-          # applies here; at the moment, that means platforms that use the PE
-          # object format with DLL files.  See the long comment at the top of
-          # tests/bindir.at for full details.
           tdlname=$dlname
           case $host,$output,$installed,$module,$dlname in
-            *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll)
-              # If a -bindir argument was supplied, place the dll there.
-              if test "x$bindir" != x ;
-              then
-                func_relative_path "$install_libdir" "$bindir"
-                tdlname=$func_relative_path_result$dlname
-              else
-                # Otherwise fall back on heuristic.
-                tdlname=../bin/$dlname
-              fi
-              ;;
+            *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
           esac
           $ECHO > $output "\
 # $outputname - a libtool library file
@@ -9421,7 +8189,7 @@ relink_command=\"$relink_command\""
     exit $EXIT_SUCCESS
 }
 
-{ test "$opt_mode" = link || test "$opt_mode" = relink; } &&
+{ test "$mode" = link || test "$mode" = relink; } &&
     func_mode_link ${1+"$@"}
 
 
@@ -9441,9 +8209,9 @@ func_mode_uninstall ()
     for arg
     do
       case $arg in
-      -f) func_append RM " $arg"; rmforce=yes ;;
-      -*) func_append RM " $arg" ;;
-      *) func_append files " $arg" ;;
+      -f) RM="$RM $arg"; rmforce=yes ;;
+      -*) RM="$RM $arg" ;;
+      *) files="$files $arg" ;;
       esac
     done
 
@@ -9452,23 +8220,24 @@ func_mode_uninstall ()
 
     rmdirs=
 
+    origobjdir="$objdir"
     for file in $files; do
       func_dirname "$file" "" "."
       dir="$func_dirname_result"
       if test "X$dir" = X.; then
-        odir="$objdir"
+        objdir="$origobjdir"
       else
-        odir="$dir/$objdir"
+        objdir="$dir/$origobjdir"
       fi
       func_basename "$file"
       name="$func_basename_result"
-      test "$opt_mode" = uninstall && odir="$dir"
+      test "$mode" = uninstall && objdir="$dir"
 
-      # Remember odir for removal later, being careful to avoid duplicates
-      if test "$opt_mode" = clean; then
+      # Remember objdir for removal later, being careful to avoid duplicates
+      if test "$mode" = clean; then
         case " $rmdirs " in
-          *" $odir "*) ;;
-          *) func_append rmdirs " $odir" ;;
+          *" $objdir "*) ;;
+          *) rmdirs="$rmdirs $objdir" ;;
         esac
       fi
 
@@ -9494,17 +8263,18 @@ func_mode_uninstall ()
 
           # Delete the libtool libraries and symlinks.
           for n in $library_names; do
-            func_append rmfiles " $odir/$n"
+            rmfiles="$rmfiles $objdir/$n"
           done
-          test -n "$old_library" && func_append rmfiles " $odir/$old_library"
+          test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
 
-          case "$opt_mode" in
+          case "$mode" in
           clean)
-            case " $library_names " in
+            case "  $library_names " in
+            # "  " in the beginning catches empty $dlname
             *" $dlname "*) ;;
-            *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;;
+            *) rmfiles="$rmfiles $objdir/$dlname" ;;
             esac
-            test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i"
+            test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
             ;;
           uninstall)
             if test -n "$library_names"; then
@@ -9532,19 +8302,19 @@ func_mode_uninstall ()
           # Add PIC object to the list of files to remove.
           if test -n "$pic_object" &&
              test "$pic_object" != none; then
-            func_append rmfiles " $dir/$pic_object"
+            rmfiles="$rmfiles $dir/$pic_object"
           fi
 
           # Add non-PIC object to the list of files to remove.
           if test -n "$non_pic_object" &&
              test "$non_pic_object" != none; then
-            func_append rmfiles " $dir/$non_pic_object"
+            rmfiles="$rmfiles $dir/$non_pic_object"
           fi
         fi
         ;;
 
       *)
-        if test "$opt_mode" = clean ; then
+        if test "$mode" = clean ; then
           noexename=$name
           case $file in
           *.exe)
@@ -9554,7 +8324,7 @@ func_mode_uninstall ()
             noexename=$func_stripname_result
             # $file with .exe has already been added to rmfiles,
             # add $file without .exe
-            func_append rmfiles " $file"
+            rmfiles="$rmfiles $file"
             ;;
           esac
           # Do a test to see if this is a libtool program.
@@ -9563,7 +8333,7 @@ func_mode_uninstall ()
               func_ltwrapper_scriptname "$file"
               relink_command=
               func_source $func_ltwrapper_scriptname_result
-              func_append rmfiles " $func_ltwrapper_scriptname_result"
+              rmfiles="$rmfiles $func_ltwrapper_scriptname_result"
             else
               relink_command=
               func_source $dir/$noexename
@@ -9571,12 +8341,12 @@ func_mode_uninstall ()
 
             # note $name still contains .exe if it was in $file originally
             # as does the version of $file that was added into $rmfiles
-            func_append rmfiles " $odir/$name $odir/${name}S.${objext}"
+            rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
             if test "$fast_install" = yes && test -n "$relink_command"; then
-              func_append rmfiles " $odir/lt-$name"
+              rmfiles="$rmfiles $objdir/lt-$name"
             fi
             if test "X$noexename" != "X$name" ; then
-              func_append rmfiles " $odir/lt-${noexename}.c"
+              rmfiles="$rmfiles $objdir/lt-${noexename}.c"
             fi
           fi
         fi
@@ -9584,6 +8354,7 @@ func_mode_uninstall ()
       esac
       func_show_eval "$RM $rmfiles" 'exit_status=1'
     done
+    objdir="$origobjdir"
 
     # Try to remove the ${objdir}s in the directories where we deleted files
     for dir in $rmdirs; do
@@ -9595,16 +8366,16 @@ func_mode_uninstall ()
     exit $exit_status
 }
 
-{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } &&
+{ test "$mode" = uninstall || test "$mode" = clean; } &&
     func_mode_uninstall ${1+"$@"}
 
-test -z "$opt_mode" && {
+test -z "$mode" && {
   help="$generic_help"
   func_fatal_help "you must specify a MODE"
 }
 
 test -z "$exec_cmd" && \
-  func_fatal_help "invalid operation mode \`$opt_mode'"
+  func_fatal_help "invalid operation mode \`$mode'"
 
 if test -n "$exec_cmd"; then
   eval exec "$exec_cmd"
diff --git a/m4/gtk-2.0.m4 b/m4/gtk-3.0.m4
index 3deba01b..5238b434 100644
--- a/m4/gtk-2.0.m4
+++ b/m4/gtk-3.0.m4
@@ -1,22 +1,22 @@
 # Configure paths for GTK+
 # Owen Taylor     1997-2001
 
-dnl AM_PATH_GTK_2_0([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]])
+dnl AM_PATH_GTK_3_0([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]])
 dnl Test for GTK+, and define GTK_CFLAGS and GTK_LIBS, if gthread is specified in MODULES, 
 dnl pass to pkg-config
 dnl
-AC_DEFUN([AM_PATH_GTK_2_0],
+AC_DEFUN([AM_PATH_GTK_3_0],
 [dnl 
 dnl Get the cflags and libraries from pkg-config
 dnl
 AC_ARG_ENABLE(gtktest, [  --disable-gtktest       do not try to compile and run a test GTK+ program],
                     , enable_gtktest=yes)
 
-  pkg_config_args=gtk+-2.0
+  pkg_config_args=gtk+-3.0
   for module in . $4
   do
       case "$module" in
-         gthread) 
+         gthread)
              pkg_config_args="$pkg_config_args gthread-2.0"
          ;;
       esac
@@ -27,7 +27,7 @@ AC_ARG_ENABLE(gtktest, [  --disable-gtktest       do not try to compile and run
   AC_PATH_PROG(PKG_CONFIG, pkg-config, no)
 
   if test x$PKG_CONFIG != xno ; then
-    if pkg-config --atleast-pkgconfig-version 0.7 ; then
+    if $PKG_CONFIG --atleast-pkgconfig-version 0.7 ; then
       :
     else
       echo "*** pkg-config too old; version 0.7 or better required."
@@ -38,7 +38,7 @@ AC_ARG_ENABLE(gtktest, [  --disable-gtktest       do not try to compile and run
     no_gtk=yes
   fi
 
-  min_gtk_version=ifelse([$1], ,2.0.0,$1)
+  min_gtk_version=ifelse([$1], ,3.0.0,$1)
   AC_MSG_CHECKING(for GTK+ - version >= $min_gtk_version)
 
   if test x$PKG_CONFIG != xno ; then
@@ -58,11 +58,11 @@ AC_ARG_ENABLE(gtktest, [  --disable-gtktest       do not try to compile and run
   if test x"$no_gtk" = x ; then
     GTK_CFLAGS=`$PKG_CONFIG $pkg_config_args --cflags`
     GTK_LIBS=`$PKG_CONFIG $pkg_config_args --libs`
-    gtk_config_major_version=`$PKG_CONFIG --modversion gtk+-2.0 | \
+    gtk_config_major_version=`$PKG_CONFIG --modversion gtk+-3.0 | \
            sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
-    gtk_config_minor_version=`$PKG_CONFIG --modversion gtk+-2.0 | \
+    gtk_config_minor_version=`$PKG_CONFIG --modversion gtk+-3.0 | \
            sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
-    gtk_config_micro_version=`$PKG_CONFIG --modversion gtk+-2.0 | \
+    gtk_config_micro_version=`$PKG_CONFIG --modversion gtk+-3.0 | \
            sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
     if test "x$enable_gtktest" = "xyes" ; then
       ac_save_CFLAGS="$CFLAGS"
@@ -85,7 +85,7 @@ main ()
   int major, minor, micro;
   char *tmp_version;
 
-  system ("touch conf.gtktest");
+  fclose (fopen ("conf.gtktest", "w"));
 
   /* HP/UX 9 (%@#!) writes to sscanf strings */
   tmp_version = g_strdup("$min_gtk_version");
@@ -98,7 +98,7 @@ main ()
       (gtk_minor_version != $gtk_config_minor_version) ||
       (gtk_micro_version != $gtk_config_micro_version))
     {
-      printf("\n*** 'pkg-config --modversion gtk+-2.0' returned %d.%d.%d, but GTK+ (%d.%d.%d)\n", 
+      printf("\n*** 'pkg-config --modversion gtk+-3.0' returned %d.%d.%d, but GTK+ (%d.%d.%d)\n", 
              $gtk_config_major_version, $gtk_config_minor_version, $gtk_config_micro_version,
              gtk_major_version, gtk_minor_version, gtk_micro_version);
       printf ("*** was found! If pkg-config was correct, then it is best\n");
@@ -152,7 +152,7 @@ main ()
   fi
   if test "x$no_gtk" = x ; then
      AC_MSG_RESULT(yes (version $gtk_config_major_version.$gtk_config_minor_version.$gtk_config_micro_version))
-     ifelse([$2], , :, [$2])     
+     ifelse([$2], , :, [$2])
   else
      AC_MSG_RESULT(no)
      if test "$PKG_CONFIG" = "no" ; then
@@ -194,3 +194,26 @@ main ()
   AC_SUBST(GTK_LIBS)
   rm -f conf.gtktest
 ])
+
+dnl GTK_CHECK_BACKEND(BACKEND-NAME [, MINIMUM-VERSION [, ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
+dnl   Tests for BACKEND-NAME in the GTK targets list
+dnl
+AC_DEFUN([GTK_CHECK_BACKEND],
+[
+  pkg_config_args=ifelse([$1],,gtk+-3.0, gtk+-$1-3.0)
+  min_gtk_version=ifelse([$2],,3.0.0,$2)
+
+  AC_PATH_PROG(PKG_CONFIG, [pkg-config], [AC_MSG_ERROR([No pkg-config found])])
+
+  if $PKG_CONFIG --atleast-version $min_gtk_version $pkg_config_args ; then
+    target_found=yes
+  else
+    target_found=no
+  fi
+
+  if test "x$target_found" = "xno"; then
+    ifelse([$4],,[AC_MSG_ERROR([Backend $backend not found.])],[$4])
+  else
+    ifelse([$3],,[:],[$3])
+  fi
+])
diff --git a/m4/libtool.m4 b/m4/libtool.m4
index 8ff3c76f..a3fee536 100644
--- a/m4/libtool.m4
+++ b/m4/libtool.m4
@@ -1,8 +1,7 @@
 # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
 #
 #   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-#                 2006, 2007, 2008, 2009, 2010 Free Software Foundation,
-#                 Inc.
+#                 2006, 2007, 2008 Free Software Foundation, Inc.
 #   Written by Gordon Matzigkeit, 1996
 #
 # This file is free software; the Free Software Foundation gives
@@ -11,8 +10,7 @@
 
 m4_define([_LT_COPYING], [dnl
 #   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-#                 2006, 2007, 2008, 2009, 2010 Free Software Foundation,
-#                 Inc.
+#                 2006, 2007, 2008 Free Software Foundation, Inc.
 #   Written by Gordon Matzigkeit, 1996
 #
 #   This file is part of GNU Libtool.
@@ -39,7 +37,7 @@ m4_define([_LT_COPYING], [dnl
 # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
 ])
 
-# serial 57 LT_INIT
+# serial 56 LT_INIT
 
 
 # LT_PREREQ(VERSION)
@@ -68,7 +66,6 @@ esac
 # ------------------
 AC_DEFUN([LT_INIT],
 [AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
-AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
 AC_BEFORE([$0], [LT_LANG])dnl
 AC_BEFORE([$0], [LT_OUTPUT])dnl
 AC_BEFORE([$0], [LTDL_INIT])dnl
@@ -85,8 +82,6 @@ AC_REQUIRE([LTVERSION_VERSION])dnl
 AC_REQUIRE([LTOBSOLETE_VERSION])dnl
 m4_require([_LT_PROG_LTMAIN])dnl
 
-_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}])
-
 dnl Parse OPTIONS
 _LT_SET_OPTIONS([$0], [$1])
 
@@ -123,7 +118,7 @@ m4_defun([_LT_CC_BASENAME],
     *) break;;
   esac
 done
-cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
 ])
 
 
@@ -143,9 +138,6 @@ m4_defun([_LT_FILEUTILS_DEFAULTS],
 m4_defun([_LT_SETUP],
 [AC_REQUIRE([AC_CANONICAL_HOST])dnl
 AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl
-AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl
-
 _LT_DECL([], [host_alias], [0], [The host system])dnl
 _LT_DECL([], [host], [0])dnl
 _LT_DECL([], [host_os], [0])dnl
@@ -168,13 +160,10 @@ _LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl
 dnl
 m4_require([_LT_FILEUTILS_DEFAULTS])dnl
 m4_require([_LT_CHECK_SHELL_FEATURES])dnl
-m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl
 m4_require([_LT_CMD_RELOAD])dnl
 m4_require([_LT_CHECK_MAGIC_METHOD])dnl
-m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl
 m4_require([_LT_CMD_OLD_ARCHIVE])dnl
 m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
-m4_require([_LT_WITH_SYSROOT])dnl
 
 _LT_CONFIG_LIBTOOL_INIT([
 # See if we are running on zsh, and set the options which allow our
@@ -190,6 +179,7 @@ fi
 _LT_CHECK_OBJDIR
 
 m4_require([_LT_TAG_COMPILER])dnl
+_LT_PROG_ECHO_BACKSLASH
 
 case $host_os in
 aix3*)
@@ -203,6 +193,23 @@ aix3*)
   ;;
 esac
 
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\([["`\\]]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+
 # Global variables:
 ofile=libtool
 can_build_shared=yes
@@ -243,28 +250,6 @@ _LT_CONFIG_COMMANDS
 ])# _LT_SETUP
 
 
-# _LT_PREPARE_SED_QUOTE_VARS
-# --------------------------
-# Define a few sed substitution that help us do robust quoting.
-m4_defun([_LT_PREPARE_SED_QUOTE_VARS],
-[# Backslashify metacharacters that are still active within
-# double-quoted strings.
-sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
-
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\([["`\\]]\)/\\\1/g'
-
-# Sed substitution to delay expansion of an escaped shell variable in a
-# double_quote_subst'ed string.
-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-
-# Sed substitution to delay expansion of an escaped single quote.
-delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
-
-# Sed substitution to avoid accidental globbing in evaled expressions
-no_glob_subst='s/\*/\\\*/g'
-])
-
 # _LT_PROG_LTMAIN
 # ---------------
 # Note that this code is called both from `configure', and `config.status'
@@ -423,7 +408,7 @@ m4_define([_lt_decl_all_varnames],
 # declaration there will have the same value as in `configure'.  VARNAME
 # must have a single quote delimited value for this to work.
 m4_define([_LT_CONFIG_STATUS_DECLARE],
-[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`'])
+[$1='`$ECHO "X$][$1" | $Xsed -e "$delay_single_quote_subst"`'])
 
 
 # _LT_CONFIG_STATUS_DECLARATIONS
@@ -433,7 +418,7 @@ m4_define([_LT_CONFIG_STATUS_DECLARE],
 # embedded single quotes properly.  In configure, this macro expands
 # each variable declared with _LT_DECL (and _LT_TAGDECL) into:
 #
-#    <var>='`$ECHO "$<var>" | $SED "$delay_single_quote_subst"`'
+#    <var>='`$ECHO "X$<var>" | $Xsed -e "$delay_single_quote_subst"`'
 m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
 [m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
     [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
@@ -532,20 +517,12 @@ LTCC='$LTCC'
 LTCFLAGS='$LTCFLAGS'
 compiler='$compiler_DEFAULT'
 
-# A function that is used when there is no print builtin or printf.
-func_fallback_echo ()
-{
-  eval 'cat <<_LTECHO_EOF
-\$[]1
-_LTECHO_EOF'
-}
-
 # Quote evaled strings.
 for var in lt_decl_all_varnames([[ \
 ]], lt_decl_quote_varnames); do
-    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
     *[[\\\\\\\`\\"\\\$]]*)
-      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
       ;;
     *)
       eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
@@ -556,9 +533,9 @@ done
 # Double-quote double-evaled strings.
 for var in lt_decl_all_varnames([[ \
 ]], lt_decl_dquote_varnames); do
-    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
     *[[\\\\\\\`\\"\\\$]]*)
-      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
       ;;
     *)
       eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
@@ -566,38 +543,16 @@ for var in lt_decl_all_varnames([[ \
     esac
 done
 
+# Fix-up fallback echo if it was mangled by the above quoting rules.
+case \$lt_ECHO in
+*'\\\[$]0 --fallback-echo"')dnl "
+  lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\[$]0 --fallback-echo"\[$]/\[$]0 --fallback-echo"/'\`
+  ;;
+esac
+
 _LT_OUTPUT_LIBTOOL_INIT
 ])
 
-# _LT_GENERATED_FILE_INIT(FILE, [COMMENT])
-# ------------------------------------
-# Generate a child script FILE with all initialization necessary to
-# reuse the environment learned by the parent script, and make the
-# file executable.  If COMMENT is supplied, it is inserted after the
-# `#!' sequence but before initialization text begins.  After this
-# macro, additional text can be appended to FILE to form the body of
-# the child script.  The macro ends with non-zero status if the
-# file could not be fully written (such as if the disk is full).
-m4_ifdef([AS_INIT_GENERATED],
-[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])],
-[m4_defun([_LT_GENERATED_FILE_INIT],
-[m4_require([AS_PREPARE])]dnl
-[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl
-[lt_write_fail=0
-cat >$1 <<_ASEOF || lt_write_fail=1
-#! $SHELL
-# Generated by $as_me.
-$2
-SHELL=\${CONFIG_SHELL-$SHELL}
-export SHELL
-_ASEOF
-cat >>$1 <<\_ASEOF || lt_write_fail=1
-AS_SHELL_SANITIZE
-_AS_PREPARE
-exec AS_MESSAGE_FD>&1
-_ASEOF
-test $lt_write_fail = 0 && chmod +x $1[]dnl
-m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT
 
 # LT_OUTPUT
 # ---------
@@ -607,11 +562,20 @@ m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT
 AC_DEFUN([LT_OUTPUT],
 [: ${CONFIG_LT=./config.lt}
 AC_MSG_NOTICE([creating $CONFIG_LT])
-_LT_GENERATED_FILE_INIT(["$CONFIG_LT"],
-[# Run this file to recreate a libtool stub with the current configuration.])
+cat >"$CONFIG_LT" <<_LTEOF
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate a libtool stub with the current configuration.
 
-cat >>"$CONFIG_LT" <<\_LTEOF
 lt_cl_silent=false
+SHELL=\${CONFIG_SHELL-$SHELL}
+_LTEOF
+
+cat >>"$CONFIG_LT" <<\_LTEOF
+AS_SHELL_SANITIZE
+_AS_PREPARE
+
+exec AS_MESSAGE_FD>&1
 exec AS_MESSAGE_LOG_FD>>config.log
 {
   echo
@@ -637,7 +601,7 @@ m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl
 m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
 configured by $[0], generated by m4_PACKAGE_STRING.
 
-Copyright (C) 2010 Free Software Foundation, Inc.
+Copyright (C) 2008 Free Software Foundation, Inc.
 This config.lt script is free software; the Free Software Foundation
 gives unlimited permision to copy, distribute and modify it."
 
@@ -682,13 +646,15 @@ chmod +x "$CONFIG_LT"
 # appending to config.log, which fails on DOS, as config.log is still kept
 # open by configure.  Here we exec the FD to /dev/null, effectively closing
 # config.log, so it can be properly (re)opened and appended to by config.lt.
-lt_cl_success=:
-test "$silent" = yes &&
-  lt_config_lt_args="$lt_config_lt_args --quiet"
-exec AS_MESSAGE_LOG_FD>/dev/null
-$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
-exec AS_MESSAGE_LOG_FD>>config.log
-$lt_cl_success || AS_EXIT(1)
+if test "$no_create" != yes; then
+  lt_cl_success=:
+  test "$silent" = yes &&
+    lt_config_lt_args="$lt_config_lt_args --quiet"
+  exec AS_MESSAGE_LOG_FD>/dev/null
+  $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
+  exec AS_MESSAGE_LOG_FD>>config.log
+  $lt_cl_success || AS_EXIT(1)
+fi
 ])# LT_OUTPUT
 
 
@@ -751,12 +717,15 @@ _LT_EOF
   # if finds mixed CR/LF and LF-only lines.  Since sed operates in
   # text mode, it properly converts lines to CR/LF.  This bash problem
   # is reportedly fixed, but why not run on old versions too?
-  sed '$q' "$ltmain" >> "$cfgfile" \
-     || (rm -f "$cfgfile"; exit 1)
+  sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
+    || (rm -f "$cfgfile"; exit 1)
 
-  _LT_PROG_REPLACE_SHELLFNS
+  _LT_PROG_XSI_SHELLFNS
 
-   mv -f "$cfgfile" "$ofile" ||
+  sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
+    || (rm -f "$cfgfile"; exit 1)
+
+  mv -f "$cfgfile" "$ofile" ||
     (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
   chmod +x "$ofile"
 ],
@@ -862,13 +831,11 @@ AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)])
 AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
 AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
 AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
-AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)])
 dnl aclocal-1.4 backwards compatibility:
 dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
 dnl AC_DEFUN([AC_LIBTOOL_F77], [])
 dnl AC_DEFUN([AC_LIBTOOL_FC], [])
 dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
-dnl AC_DEFUN([AC_LIBTOOL_RC], [])
 
 
 # _LT_TAG_COMPILER
@@ -973,31 +940,6 @@ m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[
         [lt_cv_ld_exported_symbols_list=no])
         LDFLAGS="$save_LDFLAGS"
     ])
-    AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load],
-      [lt_cv_ld_force_load=no
-      cat > conftest.c << _LT_EOF
-int forced_loaded() { return 2;}
-_LT_EOF
-      echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD
-      $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD
-      echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD
-      $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD
-      echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD
-      $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD
-      cat > conftest.c << _LT_EOF
-int main() { return 0;}
-_LT_EOF
-      echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD
-      $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
-      _lt_result=$?
-      if test -f conftest && test ! -s conftest.err && test $_lt_result = 0 && $GREP forced_load conftest 2>&1 >/dev/null; then
-        lt_cv_ld_force_load=yes
-      else
-        cat conftest.err >&AS_MESSAGE_LOG_FD
-      fi
-        rm -f conftest.err libconftest.a conftest conftest.c
-        rm -rf conftest.dSYM
-    ])
     case $host_os in
     rhapsody* | darwin1.[[012]])
       _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
@@ -1025,7 +967,7 @@ _LT_EOF
     else
       _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
     fi
-    if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
+    if test "$DSYMUTIL" != ":"; then
       _lt_dsymutil='~$DSYMUTIL $lib || :'
     else
       _lt_dsymutil=
@@ -1045,11 +987,7 @@ m4_defun([_LT_DARWIN_LINKER_FEATURES],
   _LT_TAGVAR(hardcode_direct, $1)=no
   _LT_TAGVAR(hardcode_automatic, $1)=yes
   _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-  if test "$lt_cv_ld_force_load" = "yes"; then
-    _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
-  else
-    _LT_TAGVAR(whole_archive_flag_spec, $1)=''
-  fi
+  _LT_TAGVAR(whole_archive_flag_spec, $1)=''
   _LT_TAGVAR(link_all_deplibs, $1)=yes
   _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
   case $cc_basename in
@@ -1057,7 +995,7 @@ m4_defun([_LT_DARWIN_LINKER_FEATURES],
      *) _lt_dar_can_shared=$GCC ;;
   esac
   if test "$_lt_dar_can_shared" = "yes"; then
-    output_verbose_link_cmd=func_echo_all
+    output_verbose_link_cmd=echo
     _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
     _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
     _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
@@ -1073,141 +1011,202 @@ m4_defun([_LT_DARWIN_LINKER_FEATURES],
   fi
 ])
 
-# _LT_SYS_MODULE_PATH_AIX([TAGNAME])
-# ----------------------------------
+# _LT_SYS_MODULE_PATH_AIX
+# -----------------------
 # Links a minimal program and checks the executable
 # for the system default hardcoded library path. In most cases,
 # this is /usr/lib:/lib, but when the MPI compilers are used
 # the location of the communication and MPI libs are included too.
 # If we don't find anything, use the default library path according
 # to the aix ld manual.
-# Store the results from the different compilers for each TAGNAME.
-# Allow to override them for all tags through lt_cv_aix_libpath.
 m4_defun([_LT_SYS_MODULE_PATH_AIX],
 [m4_require([_LT_DECL_SED])dnl
-if test "${lt_cv_aix_libpath+set}" = set; then
-  aix_libpath=$lt_cv_aix_libpath
-else
-  AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])],
-  [AC_LINK_IFELSE([AC_LANG_PROGRAM],[
-  lt_aix_libpath_sed='[
-      /Import File Strings/,/^$/ {
-          /^0/ {
-              s/^0  *\([^ ]*\) *$/\1/
-              p
-          }
-      }]'
-  _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-  # Check for a 64-bit object if we didn't find anything.
-  if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
-    _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-  fi],[])
-  if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
-    _LT_TAGVAR([lt_cv_aix_libpath_], [$1])="/usr/lib:/lib"
-  fi
-  ])
-  aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])
-fi
+AC_LINK_IFELSE(AC_LANG_PROGRAM,[
+lt_aix_libpath_sed='
+    /Import File Strings/,/^$/ {
+        /^0/ {
+            s/^0  *\(.*\)$/\1/
+            p
+        }
+    }'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then
+  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+fi],[])
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 ])# _LT_SYS_MODULE_PATH_AIX
 
 
 # _LT_SHELL_INIT(ARG)
 # -------------------
 m4_define([_LT_SHELL_INIT],
-[m4_divert_text([M4SH-INIT], [$1
-])])# _LT_SHELL_INIT
-
+[ifdef([AC_DIVERSION_NOTICE],
+             [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
+         [AC_DIVERT_PUSH(NOTICE)])
+$1
+AC_DIVERT_POP
+])# _LT_SHELL_INIT
 
 
 # _LT_PROG_ECHO_BACKSLASH
 # -----------------------
-# Find how we can fake an echo command that does not interpret backslash.
-# In particular, with Autoconf 2.60 or later we add some code to the start
-# of the generated configure script which will find a shell with a builtin
-# printf (which we can use as an echo command).
+# Add some code to the start of the generated configure script which
+# will find an echo command which doesn't interpret backslashes.
 m4_defun([_LT_PROG_ECHO_BACKSLASH],
-[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
-ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
-
-AC_MSG_CHECKING([how to print strings])
-# Test print first, because it will be a builtin if present.
-if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
-   test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
-  ECHO='print -r --'
-elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
-  ECHO='printf %s\n'
+[_LT_SHELL_INIT([
+# Check that we are running under the correct shell.
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+case X$lt_ECHO in
+X*--fallback-echo)
+  # Remove one level of quotation (which was required for Make).
+  ECHO=`echo "$lt_ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
+  ;;
+esac
+
+ECHO=${lt_ECHO-echo}
+if test "X[$]1" = X--no-reexec; then
+  # Discard the --no-reexec flag, and continue.
+  shift
+elif test "X[$]1" = X--fallback-echo; then
+  # Avoid inline document here, it may be left over
+  :
+elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then
+  # Yippee, $ECHO works!
+  :
 else
-  # Use this function as a fallback that always works.
-  func_fallback_echo ()
-  {
-    eval 'cat <<_LTECHO_EOF
-$[]1
-_LTECHO_EOF'
-  }
-  ECHO='func_fallback_echo'
+  # Restart under the correct shell.
+  exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
 fi
 
-# func_echo_all arg...
-# Invoke $ECHO with all args, space-separated.
-func_echo_all ()
-{
-    $ECHO "$*" 
-}
+if test "X[$]1" = X--fallback-echo; then
+  # used as fallback echo
+  shift
+  cat <<_LT_EOF
+[$]*
+_LT_EOF
+  exit 0
+fi
 
-case "$ECHO" in
-  printf*) AC_MSG_RESULT([printf]) ;;
-  print*) AC_MSG_RESULT([print -r]) ;;
-  *) AC_MSG_RESULT([cat]) ;;
-esac
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
-m4_ifdef([_AS_DETECT_SUGGESTED],
-[_AS_DETECT_SUGGESTED([
-  test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || (
-    ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-    ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
-    ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
-    PATH=/empty FPATH=/empty; export PATH FPATH
-    test "X`printf %s $ECHO`" = "X$ECHO" \
-      || test "X`print -r -- $ECHO`" = "X$ECHO" )])])
+if test -z "$lt_ECHO"; then
+  if test "X${echo_test_string+set}" != Xset; then
+    # find a string as large as possible, as long as the shell can cope with it
+    for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
+      # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+      if { echo_test_string=`eval $cmd`; } 2>/dev/null &&
+         { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null
+      then
+        break
+      fi
+    done
+  fi
 
-_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
-_LT_DECL([], [ECHO], [1], [An echo program that protects backslashes])
-])# _LT_PROG_ECHO_BACKSLASH
+  if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+     echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+     test "X$echo_testing_string" = "X$echo_test_string"; then
+    :
+  else
+    # The Solaris, AIX, and Digital Unix default echo programs unquote
+    # backslashes.  This makes it impossible to quote backslashes using
+    #   echo "$something" | sed 's/\\/\\\\/g'
+    #
+    # So, first we look for a working echo in the user's PATH.
 
+    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+    for dir in $PATH /usr/ucb; do
+      IFS="$lt_save_ifs"
+      if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+         test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+         echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
+         test "X$echo_testing_string" = "X$echo_test_string"; then
+        ECHO="$dir/echo"
+        break
+      fi
+    done
+    IFS="$lt_save_ifs"
 
-# _LT_WITH_SYSROOT
-# ----------------
-AC_DEFUN([_LT_WITH_SYSROOT],
-[AC_MSG_CHECKING([for sysroot])
-AC_ARG_WITH([sysroot],
-[  --with-sysroot[=DIR] Search for dependent libraries within DIR
-                        (or the compiler's sysroot if not specified).],
-[], [with_sysroot=no])
-
-dnl lt_sysroot will always be passed unquoted.  We quote it here
-dnl in case the user passed a directory name.
-lt_sysroot=
-case ${with_sysroot} in #(
- yes)
-   if test "$GCC" = yes; then
-     lt_sysroot=`$CC --print-sysroot 2>/dev/null`
-   fi
-   ;; #(
- /*)
-   lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
-   ;; #(
- no|'')
-   ;; #(
- *)
-   AC_MSG_RESULT([${with_sysroot}])
-   AC_MSG_ERROR([The sysroot must be an absolute path.])
-   ;;
-esac
+    if test "X$ECHO" = Xecho; then
+      # We didn't find a better echo, so look for alternatives.
+      if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' &&
+         echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` &&
+         test "X$echo_testing_string" = "X$echo_test_string"; then
+        # This shell has a builtin print -r that does the trick.
+        ECHO='print -r'
+      elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } &&
+           test "X$CONFIG_SHELL" != X/bin/ksh; then
+        # If we have ksh, try running configure again with it.
+        ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+        export ORIGINAL_CONFIG_SHELL
+        CONFIG_SHELL=/bin/ksh
+        export CONFIG_SHELL
+        exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
+      else
+        # Try using printf.
+        ECHO='printf %s\n'
+        if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+           echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+           test "X$echo_testing_string" = "X$echo_test_string"; then
+          # Cool, printf works
+          :
+        elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+             test "X$echo_testing_string" = 'X\t' &&
+             echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+             test "X$echo_testing_string" = "X$echo_test_string"; then
+          CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
+          export CONFIG_SHELL
+          SHELL="$CONFIG_SHELL"
+          export SHELL
+          ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
+        elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+             test "X$echo_testing_string" = 'X\t' &&
+             echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+             test "X$echo_testing_string" = "X$echo_test_string"; then
+          ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
+        else
+          # maybe with a smaller string...
+          prev=:
+
+          for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
+            if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null
+            then
+              break
+            fi
+            prev="$cmd"
+          done
+
+          if test "$prev" != 'sed 50q "[$]0"'; then
+            echo_test_string=`eval $prev`
+            export echo_test_string
+            exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
+          else
+            # Oops.  We lost completely, so just stick with echo.
+            ECHO=echo
+          fi
+        fi
+      fi
+    fi
+  fi
+fi
+
+# Copy echo and quote the copy suitably for passing to libtool from
+# the Makefile, instead of quoting the original, which is used later.
+lt_ECHO=$ECHO
+if test "X$lt_ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
+   lt_ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
+fi
+
+AC_SUBST(lt_ECHO)
+])
+_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
+_LT_DECL([], [ECHO], [1],
+    [An echo program that does not interpret backslashes])
+])# _LT_PROG_ECHO_BACKSLASH
 
- AC_MSG_RESULT([${lt_sysroot:-no}])
-_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl
-[dependent libraries, and in which our libraries should be installed.])])
 
 # _LT_ENABLE_LOCK
 # ---------------
@@ -1237,7 +1236,7 @@ ia64-*-hpux*)
   ;;
 *-*-irix6*)
   # Find out which ABI we are using.
-  echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
+  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
   if AC_TRY_EVAL(ac_compile); then
     if test "$lt_cv_prog_gnu_ld" = yes; then
       case `/usr/bin/file conftest.$ac_objext` in
@@ -1355,47 +1354,14 @@ need_locks="$enable_libtool_lock"
 ])# _LT_ENABLE_LOCK
 
 
-# _LT_PROG_AR
-# -----------
-m4_defun([_LT_PROG_AR],
-[AC_CHECK_TOOLS(AR, [ar], false)
-: ${AR=ar}
-: ${AR_FLAGS=cru}
-_LT_DECL([], [AR], [1], [The archiver])
-_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive])
-
-AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file],
-  [lt_cv_ar_at_file=no
-   AC_COMPILE_IFELSE([AC_LANG_PROGRAM],
-     [echo conftest.$ac_objext > conftest.lst
-      lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD'
-      AC_TRY_EVAL([lt_ar_try])
-      if test "$ac_status" -eq 0; then
-        # Ensure the archiver fails upon bogus file names.
-        rm -f conftest.$ac_objext libconftest.a
-        AC_TRY_EVAL([lt_ar_try])
-        if test "$ac_status" -ne 0; then
-          lt_cv_ar_at_file=@
-        fi
-      fi
-      rm -f conftest.* libconftest.a
-     ])
-  ])
-
-if test "x$lt_cv_ar_at_file" = xno; then
-  archiver_list_spec=
-else
-  archiver_list_spec=$lt_cv_ar_at_file
-fi
-_LT_DECL([], [archiver_list_spec], [1],
-  [How to feed a file listing to the archiver])
-])# _LT_PROG_AR
-
-
 # _LT_CMD_OLD_ARCHIVE
 # -------------------
 m4_defun([_LT_CMD_OLD_ARCHIVE],
-[_LT_PROG_AR
+[AC_CHECK_TOOL(AR, ar, false)
+test -z "$AR" && AR=ar
+test -z "$AR_FLAGS" && AR_FLAGS=cru
+_LT_DECL([], [AR], [1], [The archiver])
+_LT_DECL([], [AR_FLAGS], [1])
 
 AC_CHECK_TOOL(STRIP, strip, :)
 test -z "$STRIP" && STRIP=:
@@ -1422,19 +1388,10 @@ if test -n "$RANLIB"; then
   esac
   old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
 fi
-
-case $host_os in
-  darwin*)
-    lock_old_archive_extraction=yes ;;
-  *)
-    lock_old_archive_extraction=no ;;
-esac
 _LT_DECL([], [old_postinstall_cmds], [2])
 _LT_DECL([], [old_postuninstall_cmds], [2])
 _LT_TAGDECL([], [old_archive_cmds], [2],
     [Commands used to build an old-style archive])
-_LT_DECL([], [lock_old_archive_extraction], [0],
-    [Whether to use a lock for old archive extraction])
 ])# _LT_CMD_OLD_ARCHIVE
 
 
@@ -1459,15 +1416,15 @@ AC_CACHE_CHECK([$1], [$2],
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+   (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&AS_MESSAGE_LOG_FD
-   echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+   echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
-     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
      $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
      if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
        $2=yes
@@ -1507,7 +1464,7 @@ AC_CACHE_CHECK([$1], [$2],
      if test -s conftest.err; then
        # Append any errors to the config.log.
        cat conftest.err 1>&AS_MESSAGE_LOG_FD
-       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+       $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
        $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
        if diff conftest.exp conftest.er2 >/dev/null; then
          $2=yes
@@ -1570,11 +1527,6 @@ AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
     lt_cv_sys_max_cmd_len=8192;
     ;;
 
-  mint*)
-    # On MiNT this can take a long time and run out of memory.
-    lt_cv_sys_max_cmd_len=8192;
-    ;;
-
   amigaos*)
     # On AmigaOS with pdksh, this test takes hours, literally.
     # So we just punt and use a minimum line length of 8192.
@@ -1639,8 +1591,8 @@ AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
       # If test is not a shell built-in, we'll probably end up computing a
       # maximum length that is only half of the actual maximum length, but
       # we can't tell.
-      while { test "X"`func_fallback_echo "$teststring$teststring" 2>/dev/null` \
-                 = "X$teststring$teststring"; } >/dev/null 2>&1 &&
+      while { test "X"`$SHELL [$]0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \
+                 = "XX$teststring$teststring"; } >/dev/null 2>&1 &&
               test $i != 17 # 1/2 MB should be enough
       do
         i=`expr $i + 1`
@@ -1691,7 +1643,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-[#line $LINENO "configure"
+[#line __oline__ "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -1732,13 +1684,7 @@ else
 #  endif
 #endif
 
-/* When -fvisbility=hidden is used, assume the code has been annotated
-   correspondingly for the symbols needed.  */
-#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
-int fnord () __attribute__((visibility("default")));
-#endif
-
-int fnord () { return 42; }
+void fnord() { int i=42;}
 int main ()
 {
   void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
@@ -1747,11 +1693,7 @@ int main ()
   if (self)
     {
       if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-      else
-        {
-          if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
-          else puts (dlerror ());
-        }
+      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
       /* dlclose (self); */
     }
   else
@@ -1927,16 +1869,16 @@ AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+   (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&AS_MESSAGE_LOG_FD
-   echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+   echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings
-     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
      $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
      if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
        _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
@@ -2095,7 +2037,6 @@ m4_require([_LT_DECL_EGREP])dnl
 m4_require([_LT_FILEUTILS_DEFAULTS])dnl
 m4_require([_LT_DECL_OBJDUMP])dnl
 m4_require([_LT_DECL_SED])dnl
-m4_require([_LT_CHECK_SHELL_FEATURES])dnl
 AC_MSG_CHECKING([dynamic linker characteristics])
 m4_if([$1],
         [], [
@@ -2104,23 +2045,16 @@ if test "$GCC" = yes; then
     darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
     *) lt_awk_arg="/^libraries:/" ;;
   esac
-  case $host_os in
-    mingw* | cegcc*) lt_sed_strip_eq="s,=\([[A-Za-z]]:\),\1,g" ;;
-    *) lt_sed_strip_eq="s,=/,/,g" ;;
-  esac
-  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
-  case $lt_search_path_spec in
-  *\;*)
+  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+  if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then
     # if the path contains ";" then we assume it to be the separator
     # otherwise default to the standard path separator (i.e. ":") - it is
     # assumed that no part of a normal pathname contains ";" but that should
     # okay in the real world where ";" in dirpaths is itself problematic.
-    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
-    ;;
-  *)
-    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
-    ;;
-  esac
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'`
+  else
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+  fi
   # Ok, now we have the path, separated by spaces, we can step through it
   # and add multilib dir if necessary.
   lt_tmp_lt_search_path_spec=
@@ -2133,7 +2067,7 @@ if test "$GCC" = yes; then
         lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
     fi
   done
-  lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
+  lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk '
 BEGIN {RS=" "; FS="/|\n";} {
   lt_foo="";
   lt_count=0;
@@ -2153,13 +2087,7 @@ BEGIN {RS=" "; FS="/|\n";} {
   if (lt_foo != "") { lt_freq[[lt_foo]]++; }
   if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
 }'`
-  # AWK program above erroneously prepends '/' to C:/dos/paths
-  # for these hosts.
-  case $host_os in
-    mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
-      $SED 's,/\([[A-Za-z]]:\),\1,g'` ;;
-  esac
-  sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
+  sys_lib_search_path_spec=`$ECHO $lt_search_path_spec`
 else
   sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
 fi])
@@ -2247,7 +2175,7 @@ amigaos*)
   m68k)
     library_names_spec='$libname.ixlibrary $libname.a'
     # Create ${libname}_ixlibrary.a entries in /sys/libs.
-    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
     ;;
   esac
   ;;
@@ -2278,9 +2206,8 @@ cygwin* | mingw* | pw32* | cegcc*)
   need_version=no
   need_lib_prefix=no
 
-  case $GCC,$cc_basename in
-  yes,*)
-    # gcc
+  case $GCC,$host_os in
+  yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
     library_names_spec='$libname.dll.a'
     # DLL is installed to $(libdir)/../bin by postinstall_cmds
     postinstall_cmds='base_file=`basename \${file}`~
@@ -2301,83 +2228,36 @@ cygwin* | mingw* | pw32* | cegcc*)
     cygwin*)
       # Cygwin DLLs use 'cyg' prefix rather than 'lib'
       soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-m4_if([$1], [],[
-      sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"])
+      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
       ;;
     mingw* | cegcc*)
       # MinGW DLLs use traditional 'lib' prefix
       soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-      ;;
-    pw32*)
-      # pw32 DLLs use 'pw' prefix rather than 'lib'
-      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-      ;;
-    esac
-    dynamic_linker='Win32 ld.exe'
-    ;;
-
-  *,cl*)
-    # Native MSVC
-    libname_spec='$name'
-    soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-    library_names_spec='${libname}.dll.lib'
-
-    case $build_os in
-    mingw*)
-      sys_lib_search_path_spec=
-      lt_save_ifs=$IFS
-      IFS=';'
-      for lt_path in $LIB
-      do
-        IFS=$lt_save_ifs
-        # Let DOS variable expansion print the short 8.3 style file name.
-        lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
-        sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
-      done
-      IFS=$lt_save_ifs
-      # Convert to MSYS style.
-      sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'`
-      ;;
-    cygwin*)
-      # Convert to unix form, then to dos form, then back to unix form
-      # but this time dos style (no spaces!) so that the unix form looks
-      # like /cygdrive/c/PROGRA~1:/cygdr...
-      sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
-      sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
-      sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-      ;;
-    *)
-      sys_lib_search_path_spec="$LIB"
+      sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
       if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
-        # It is most probably a Windows format PATH.
+        # It is most probably a Windows format PATH printed by
+        # mingw gcc, but we are running on Cygwin. Gcc prints its search
+        # path with ; separators, and with drive letters. We can handle the
+        # drive letters (cygwin fileutils understands them), so leave them,
+        # especially as we might pass files found there to a mingw objdump,
+        # which wouldn't understand a cygwinified path. Ahh.
         sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
       else
-        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
       fi
-      # FIXME: find the short name or the path components, as spaces are
-      # common. (e.g. "Program Files" -> "PROGRA~1")
+      ;;
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
       ;;
     esac
-
-    # DLL is installed to $(libdir)/../bin by postinstall_cmds
-    postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
-      dldir=$destdir/`dirname \$dlpath`~
-      test -d \$dldir || mkdir -p \$dldir~
-      $install_prog $dir/$dlname \$dldir/$dlname'
-    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-      dlpath=$dir/\$dldll~
-       $RM \$dlpath'
-    shlibpath_overrides_runpath=yes
-    dynamic_linker='Win32 link.exe'
     ;;
 
   *)
-    # Assume MSVC wrapper
     library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
-    dynamic_linker='Win32 ld.exe'
     ;;
   esac
+  dynamic_linker='Win32 ld.exe'
   # FIXME: first we should search . and the directory the executable is in
   shlibpath_var=PATH
   ;;
@@ -2461,20 +2341,6 @@ gnu*)
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
   soname_spec='${libname}${release}${shared_ext}$major'
   shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  ;;
-
-haiku*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  dynamic_linker="$host_os runtime_loader"
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
   hardcode_into_libs=yes
   ;;
 
@@ -2520,10 +2386,8 @@ hpux9* | hpux10* | hpux11*)
     soname_spec='${libname}${release}${shared_ext}$major'
     ;;
   esac
-  # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+  # HP-UX runs *really* slowly unless shared libraries are mode 555.
   postinstall_cmds='chmod 555 $lib'
-  # or fails outright, so override atomically:
-  install_override_mode=555
   ;;
 
 interix[[3-9]]*)
@@ -2590,21 +2454,16 @@ linux* | k*bsd*-gnu | kopensolaris*-gnu)
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
-
   # Some binutils ld are patched to set DT_RUNPATH
-  AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath],
-    [lt_cv_shlibpath_overrides_runpath=no
-    save_LDFLAGS=$LDFLAGS
-    save_libdir=$libdir
-    eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
-         LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
-    AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
-      [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
-         [lt_cv_shlibpath_overrides_runpath=yes])])
-    LDFLAGS=$save_LDFLAGS
-    libdir=$save_libdir
-    ])
-  shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+  save_LDFLAGS=$LDFLAGS
+  save_libdir=$libdir
+  eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
+       LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
+  AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+    [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
+       [shlibpath_overrides_runpath=yes])])
+  LDFLAGS=$save_LDFLAGS
+  libdir=$save_libdir
 
   # This implies no fast_install, which is unacceptable.
   # Some rework will be needed to allow for fast_install
@@ -2613,7 +2472,7 @@ linux* | k*bsd*-gnu | kopensolaris*-gnu)
 
   # Append ld.so.conf contents to the search path
   if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[   ]*hwcap[        ]/d;s/[:,      ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[   ]*hwcap[        ]/d;s/[:,      ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
     sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
   fi
 
@@ -2858,8 +2717,6 @@ _LT_DECL([], [library_names_spec], [1],
     The last name is the one that the linker finds with -lNAME]])
 _LT_DECL([], [soname_spec], [1],
     [[The coded name of the library, if different from the real name]])
-_LT_DECL([], [install_override_mode], [1],
-    [Permission mode override for installation of shared libraries])
 _LT_DECL([], [postinstall_cmds], [2],
     [Command to use after installation of a shared archive])
 _LT_DECL([], [postuninstall_cmds], [2],
@@ -2972,7 +2829,6 @@ AC_REQUIRE([AC_CANONICAL_HOST])dnl
 AC_REQUIRE([AC_CANONICAL_BUILD])dnl
 m4_require([_LT_DECL_SED])dnl
 m4_require([_LT_DECL_EGREP])dnl
-m4_require([_LT_PROG_ECHO_BACKSLASH])dnl
 
 AC_ARG_WITH([gnu-ld],
     [AS_HELP_STRING([--with-gnu-ld],
@@ -3094,11 +2950,6 @@ case $reload_flag in
 esac
 reload_cmds='$LD$reload_flag -o $output$reload_objs'
 case $host_os in
-  cygwin* | mingw* | pw32* | cegcc*)
-    if test "$GCC" != yes; then
-      reload_cmds=false
-    fi
-    ;;
   darwin*)
     if test "$GCC" = yes; then
       reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
@@ -3107,8 +2958,8 @@ case $host_os in
     fi
     ;;
 esac
-_LT_TAGDECL([], [reload_flag], [1], [How to create reloadable object files])dnl
-_LT_TAGDECL([], [reload_cmds], [2])dnl
+_LT_DECL([], [reload_flag], [1], [How to create reloadable object files])dnl
+_LT_DECL([], [reload_cmds], [2])dnl
 ])# _LT_CMD_RELOAD
 
 
@@ -3160,18 +3011,16 @@ mingw* | pw32*)
   # Base MSYS/MinGW do not provide the 'file' command needed by
   # func_win32_libid shell function, so use a weaker test based on 'objdump',
   # unless we find 'file', for example because we are cross-compiling.
-  # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
-  if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
+  if ( file / ) >/dev/null 2>&1; then
     lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
     lt_cv_file_magic_cmd='func_win32_libid'
   else
-    # Keep this pattern in sync with the one in func_win32_libid.
-    lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
+    lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
     lt_cv_file_magic_cmd='$OBJDUMP -f'
   fi
   ;;
 
-cegcc*)
+cegcc)
   # use the weaker test based on 'objdump'. See mingw*.
   lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
   lt_cv_file_magic_cmd='$OBJDUMP -f'
@@ -3201,10 +3050,6 @@ gnu*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
-haiku*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
 hpux10.20* | hpux11*)
   lt_cv_file_magic_cmd=/usr/bin/file
   case $host_cpu in
@@ -3213,11 +3058,11 @@ hpux10.20* | hpux11*)
     lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
     ;;
   hppa*64*)
-    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]']
+    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
     lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
     ;;
   *)
-    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library'
+    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
     lt_cv_file_magic_test_file=/usr/lib/libc.sl
     ;;
   esac
@@ -3317,21 +3162,6 @@ tpf*)
   ;;
 esac
 ])
-
-file_magic_glob=
-want_nocaseglob=no
-if test "$build" = "$host"; then
-  case $host_os in
-  mingw* | pw32*)
-    if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
-      want_nocaseglob=yes
-    else
-      file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"`
-    fi
-    ;;
-  esac
-fi
-
 file_magic_cmd=$lt_cv_file_magic_cmd
 deplibs_check_method=$lt_cv_deplibs_check_method
 test -z "$deplibs_check_method" && deplibs_check_method=unknown
@@ -3339,11 +3169,7 @@ test -z "$deplibs_check_method" && deplibs_check_method=unknown
 _LT_DECL([], [deplibs_check_method], [1],
     [Method to check whether dependent libraries are shared objects])
 _LT_DECL([], [file_magic_cmd], [1],
-    [Command to use when deplibs_check_method = "file_magic"])
-_LT_DECL([], [file_magic_glob], [1],
-    [How to find potential files when deplibs_check_method = "file_magic"])
-_LT_DECL([], [want_nocaseglob], [1],
-    [Find potential files using nocaseglob when deplibs_check_method = "file_magic"])
+    [Command to use when deplibs_check_method == "file_magic"])
 ])# _LT_CHECK_MAGIC_METHOD
 
 
@@ -3400,19 +3226,7 @@ if test "$lt_cv_path_NM" != "no"; then
   NM="$lt_cv_path_NM"
 else
   # Didn't find any BSD compatible name lister, look for dumpbin.
-  if test -n "$DUMPBIN"; then :
-    # Let the user override the test.
-  else
-    AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :)
-    case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
-    *COFF*)
-      DUMPBIN="$DUMPBIN -symbols"
-      ;;
-    *)
-      DUMPBIN=:
-      ;;
-    esac
-  fi
+  AC_CHECK_TOOLS(DUMPBIN, ["dumpbin -symbols" "link -dump -symbols"], :)
   AC_SUBST([DUMPBIN])
   if test "$DUMPBIN" != ":"; then
     NM="$DUMPBIN"
@@ -3425,13 +3239,13 @@ _LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl
 AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface],
   [lt_cv_nm_interface="BSD nm"
   echo "int some_variable = 0;" > conftest.$ac_ext
-  (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
+  (eval echo "\"\$as_me:__oline__: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
   (eval "$ac_compile" 2>conftest.err)
   cat conftest.err >&AS_MESSAGE_LOG_FD
-  (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
+  (eval echo "\"\$as_me:__oline__: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
   (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
   cat conftest.err >&AS_MESSAGE_LOG_FD
-  (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD)
+  (eval echo "\"\$as_me:__oline__: output\"" >&AS_MESSAGE_LOG_FD)
   cat conftest.out >&AS_MESSAGE_LOG_FD
   if $GREP 'External.*some_variable' conftest.out > /dev/null; then
     lt_cv_nm_interface="MS dumpbin"
@@ -3446,67 +3260,6 @@ dnl aclocal-1.4 backwards compatibility:
 dnl AC_DEFUN([AM_PROG_NM], [])
 dnl AC_DEFUN([AC_PROG_NM], [])
 
-# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
-# --------------------------------
-# how to determine the name of the shared library
-# associated with a specific link library.
-#  -- PORTME fill in with the dynamic library characteristics
-m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB],
-[m4_require([_LT_DECL_EGREP])
-m4_require([_LT_DECL_OBJDUMP])
-m4_require([_LT_DECL_DLLTOOL])
-AC_CACHE_CHECK([how to associate runtime and link libraries],
-lt_cv_sharedlib_from_linklib_cmd,
-[lt_cv_sharedlib_from_linklib_cmd='unknown'
-
-case $host_os in
-cygwin* | mingw* | pw32* | cegcc*)
-  # two different shell functions defined in ltmain.sh
-  # decide which to use based on capabilities of $DLLTOOL
-  case `$DLLTOOL --help 2>&1` in
-  *--identify-strict*)
-    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
-    ;;
-  *)
-    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
-    ;;
-  esac
-  ;;
-*)
-  # fallback: assume linklib IS sharedlib
-  lt_cv_sharedlib_from_linklib_cmd="$ECHO"
-  ;;
-esac
-])
-sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
-test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
-
-_LT_DECL([], [sharedlib_from_linklib_cmd], [1],
-    [Command to associate shared and link libraries])
-])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
-
-
-# _LT_PATH_MANIFEST_TOOL
-# ----------------------
-# locate the manifest tool
-m4_defun([_LT_PATH_MANIFEST_TOOL],
-[AC_CHECK_TOOL(MANIFEST_TOOL, mt, :)
-test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
-AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool],
-  [lt_cv_path_mainfest_tool=no
-  echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD
-  $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
-  cat conftest.err >&AS_MESSAGE_LOG_FD
-  if $GREP 'Manifest Tool' conftest.out > /dev/null; then
-    lt_cv_path_mainfest_tool=yes
-  fi
-  rm -f conftest*])
-if test "x$lt_cv_path_mainfest_tool" != xyes; then
-  MANIFEST_TOOL=:
-fi
-_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl
-])# _LT_PATH_MANIFEST_TOOL
-
 
 # LT_LIB_M
 # --------
@@ -3515,7 +3268,7 @@ AC_DEFUN([LT_LIB_M],
 [AC_REQUIRE([AC_CANONICAL_HOST])dnl
 LIBM=
 case $host in
-*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*)
+*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
   # These system don't have libm, or don't need it
   ;;
 *-ncr-sysv4.3*)
@@ -3543,12 +3296,7 @@ m4_defun([_LT_COMPILER_NO_RTTI],
 _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
 
 if test "$GCC" = yes; then
-  case $cc_basename in
-  nvcc*)
-    _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;;
-  *)
-    _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;;
-  esac
+  _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
 
   _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
     lt_cv_prog_compiler_rtti_exceptions,
@@ -3565,7 +3313,6 @@ _LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1],
 m4_defun([_LT_CMD_GLOBAL_SYMBOLS],
 [AC_REQUIRE([AC_CANONICAL_HOST])dnl
 AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_PROG_AWK])dnl
 AC_REQUIRE([LT_PATH_NM])dnl
 AC_REQUIRE([LT_PATH_LD])dnl
 m4_require([_LT_DECL_SED])dnl
@@ -3633,8 +3380,8 @@ esac
 lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
 
 # Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (void *) \&\2},/p'"
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
 
 # Handle CRLF in mingw tool chain
 opt_cr=
@@ -3670,7 +3417,6 @@ for ac_symprfx in "" "_"; do
   else
     lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[     ]]\($symcode$symcode*\)[[       ]][[    ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
   fi
-  lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
 
   # Check to see that the pipe works correctly.
   pipe_works=no
@@ -3692,7 +3438,7 @@ _LT_EOF
   if AC_TRY_EVAL(ac_compile); then
     # Now try to grab the symbols.
     nlist=conftest.nm
-    if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then
+    if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
       # Try sorting and uniquifying the output.
       if sort "$nlist" | uniq > "$nlist"T; then
         mv -f "$nlist"T "$nlist"
@@ -3704,18 +3450,6 @@ _LT_EOF
       if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
         if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
           cat <<_LT_EOF > conftest.$ac_ext
-/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
-#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
-/* DATA imports from DLLs on WIN32 con't be const, because runtime
-   relocations are performed -- see ld's documentation on pseudo-relocs.  */
-# define LT@&t@_DLSYM_CONST
-#elif defined(__osf__)
-/* This system does not cope well with relocations in const data.  */
-# define LT@&t@_DLSYM_CONST
-#else
-# define LT@&t@_DLSYM_CONST const
-#endif
-
 #ifdef __cplusplus
 extern "C" {
 #endif
@@ -3727,7 +3461,7 @@ _LT_EOF
           cat <<_LT_EOF >> conftest.$ac_ext
 
 /* The mapping between symbol names and symbols.  */
-LT@&t@_DLSYM_CONST struct {
+const struct {
   const char *name;
   void       *address;
 }
@@ -3753,15 +3487,15 @@ static const void *lt_preloaded_setup() {
 _LT_EOF
           # Now try linking the two files.
           mv conftest.$ac_objext conftstm.$ac_objext
-          lt_globsym_save_LIBS=$LIBS
-          lt_globsym_save_CFLAGS=$CFLAGS
+          lt_save_LIBS="$LIBS"
+          lt_save_CFLAGS="$CFLAGS"
           LIBS="conftstm.$ac_objext"
           CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
           if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
             pipe_works=yes
           fi
-          LIBS=$lt_globsym_save_LIBS
-          CFLAGS=$lt_globsym_save_CFLAGS
+          LIBS="$lt_save_LIBS"
+          CFLAGS="$lt_save_CFLAGS"
         else
           echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
         fi
@@ -3794,13 +3528,6 @@ else
   AC_MSG_RESULT(ok)
 fi
 
-# Response file support.
-if test "$lt_cv_nm_interface" = "MS dumpbin"; then
-  nm_file_list_spec='@'
-elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then
-  nm_file_list_spec='@'
-fi
-
 _LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1],
     [Take the output of nm and produce a listing of raw symbols and C names])
 _LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
@@ -3811,8 +3538,6 @@ _LT_DECL([global_symbol_to_c_name_address],
 _LT_DECL([global_symbol_to_c_name_address_lib_prefix],
     [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
     [Transform the output of nm in a C name address pair when lib prefix is needed])
-_LT_DECL([], [nm_file_list_spec], [1],
-    [Specify filename containing input files for $NM])
 ]) # _LT_CMD_GLOBAL_SYMBOLS
 
 
@@ -3824,6 +3549,7 @@ _LT_TAGVAR(lt_prog_compiler_wl, $1)=
 _LT_TAGVAR(lt_prog_compiler_pic, $1)=
 _LT_TAGVAR(lt_prog_compiler_static, $1)=
 
+AC_MSG_CHECKING([for $compiler option to produce PIC])
 m4_if([$1], [CXX], [
   # C++ specific cases for pic, static, wl, etc.
   if test "$GXX" = yes; then
@@ -3874,11 +3600,6 @@ m4_if([$1], [CXX], [
       # DJGPP does not support shared libraries at all
       _LT_TAGVAR(lt_prog_compiler_pic, $1)=
       ;;
-    haiku*)
-      # PIC is the default for Haiku.
-      # The "-static" flag exists, but is broken.
-      _LT_TAGVAR(lt_prog_compiler_static, $1)=
-      ;;
     interix[[3-9]]*)
       # Interix 3.x gcc -fpic/-fPIC options generate broken code.
       # Instead, we relocate shared libraries at runtime.
@@ -3928,12 +3649,6 @@ m4_if([$1], [CXX], [
           ;;
         esac
         ;;
-      mingw* | cygwin* | os2* | pw32* | cegcc*)
-        # This hack is so that the source file can tell whether it is being
-        # built for inclusion in a dll (and should export symbols for example).
-        m4_if([$1], [GCJ], [],
-          [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
-        ;;
       dgux*)
         case $cc_basename in
           ec++*)
@@ -4023,8 +3738,8 @@ m4_if([$1], [CXX], [
             _LT_TAGVAR(lt_prog_compiler_pic, $1)=
             _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
             ;;
-          xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*)
-            # IBM XL 8.0, 9.0 on PPC and BlueGene
+          xlc* | xlC*)
+            # IBM XL 8.0 on PPC
             _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
             _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
             _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
@@ -4086,7 +3801,7 @@ m4_if([$1], [CXX], [
         ;;
       solaris*)
         case $cc_basename in
-          CC* | sunCC*)
+          CC*)
             # Sun C++ 4.2, 5.x and Centerline C++
             _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
             _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
@@ -4190,12 +3905,6 @@ m4_if([$1], [CXX], [
       _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
       ;;
 
-    haiku*)
-      # PIC is the default for Haiku.
-      # The "-static" flag exists, but is broken.
-      _LT_TAGVAR(lt_prog_compiler_static, $1)=
-      ;;
-
     hpux*)
       # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
       # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
@@ -4238,13 +3947,6 @@ m4_if([$1], [CXX], [
       _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
       ;;
     esac
-
-    case $cc_basename in
-    nvcc*) # Cuda Compiler Driver 2.2
-      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker '
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Xcompiler -fPIC'
-      ;;
-    esac
   else
     # PORTME Check for flag to pass linker flags through the system compiler.
     case $host_os in
@@ -4308,13 +4010,7 @@ m4_if([$1], [CXX], [
         _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared'
         _LT_TAGVAR(lt_prog_compiler_static, $1)='--static'
         ;;
-      nagfor*)
-        # NAG Fortran compiler
-        _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,'
-        _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-        _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-        ;;
-      pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+      pgcc* | pgf77* | pgf90* | pgf95*)
         # Portland Group compilers (*not* the Pentium gcc compiler,
         # which looks to be a dead project)
         _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
@@ -4326,26 +4022,26 @@ m4_if([$1], [CXX], [
         # All Alpha code is PIC.
         _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
         ;;
-      xl* | bgxl* | bgf* | mpixl*)
-        # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
+      xl*)
+        # IBM XL C 8.0/Fortran 10.1 on PPC
         _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
         _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
         _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
         ;;
       *)
         case `$CC -V 2>&1 | sed 5q` in
-        *Sun\ F* | *Sun*Fortran*)
-          # Sun Fortran 8.3 passes all unrecognized flags to the linker
-          _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-          _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-          _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
-          ;;
         *Sun\ C*)
           # Sun C 5.9
           _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
           _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
           _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
           ;;
+        *Sun\ F*)
+          # Sun Fortran 8.3 passes all unrecognized flags to the linker
+          _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+          _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+          _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
+          ;;
         esac
         ;;
       esac
@@ -4376,7 +4072,7 @@ m4_if([$1], [CXX], [
       _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
       _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
       case $cc_basename in
-      f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+      f77* | f90* | f95*)
         _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
       *)
         _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
@@ -4433,11 +4129,9 @@ case $host_os in
     _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])"
     ;;
 esac
-
-AC_CACHE_CHECK([for $compiler option to produce PIC],
-  [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)],
-  [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
-_LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)
+AC_MSG_RESULT([$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
+_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
+        [How to pass a linker flag through the compiler])
 
 #
 # Check to make sure the PIC flag actually works.
@@ -4456,8 +4150,6 @@ fi
 _LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1],
         [Additional compiler flags for building library objects])
 
-_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
-        [How to pass a linker flag through the compiler])
 #
 # Check to make sure the static flag actually works.
 #
@@ -4478,7 +4170,6 @@ _LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1],
 m4_defun([_LT_LINKER_SHLIBS],
 [AC_REQUIRE([LT_PATH_LD])dnl
 AC_REQUIRE([LT_PATH_NM])dnl
-m4_require([_LT_PATH_MANIFEST_TOOL])dnl
 m4_require([_LT_FILEUTILS_DEFAULTS])dnl
 m4_require([_LT_DECL_EGREP])dnl
 m4_require([_LT_DECL_SED])dnl
@@ -4487,38 +4178,30 @@ m4_require([_LT_TAG_COMPILER])dnl
 AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
 m4_if([$1], [CXX], [
   _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
   case $host_os in
   aix[[4-9]]*)
     # If we're using GNU nm, then we don't want the "-C" option.
     # -C means demangle to AIX nm, but means don't demangle with GNU nm
-    # Also, AIX nm treats weak defined symbols like other global defined
-    # symbols, whereas GNU nm marks them as "W".
     if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
-      _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+      _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
     else
       _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
     fi
     ;;
   pw32*)
     _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
-    ;;
+  ;;
   cygwin* | mingw* | cegcc*)
-    case $cc_basename in
-    cl*) ;;
-    *)
-      _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
-      _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
-      ;;
-    esac
-    ;;
-  linux* | k*bsd*-gnu | gnu*)
+    _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
+  ;;
+  linux* | k*bsd*-gnu)
     _LT_TAGVAR(link_all_deplibs, $1)=no
-    ;;
+  ;;
   *)
     _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-    ;;
+  ;;
   esac
+  _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
 ], [
   runpath_var=
   _LT_TAGVAR(allow_undefined_flag, $1)=
@@ -4578,39 +4261,13 @@ dnl Note also adjust exclude_expsyms for C++ above.
   openbsd*)
     with_gnu_ld=no
     ;;
-  linux* | k*bsd*-gnu | gnu*)
+  linux* | k*bsd*-gnu)
     _LT_TAGVAR(link_all_deplibs, $1)=no
     ;;
   esac
 
   _LT_TAGVAR(ld_shlibs, $1)=yes
-
-  # On some targets, GNU ld is compatible enough with the native linker
-  # that we're better off using the native interface for both.
-  lt_use_gnu_ld_interface=no
   if test "$with_gnu_ld" = yes; then
-    case $host_os in
-      aix*)
-        # The AIX port of GNU ld has always aspired to compatibility
-        # with the native linker.  However, as the warning in the GNU ld
-        # block says, versions before 2.19.5* couldn't really create working
-        # shared libraries, regardless of the interface used.
-        case `$LD -v 2>&1` in
-          *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
-          *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;;
-          *\ \(GNU\ Binutils\)\ [[3-9]]*) ;;
-          *)
-            lt_use_gnu_ld_interface=yes
-            ;;
-        esac
-        ;;
-      *)
-        lt_use_gnu_ld_interface=yes
-        ;;
-    esac
-  fi
-
-  if test "$lt_use_gnu_ld_interface" = yes; then
     # If archive_cmds runs LD, not CC, wlarc should be empty
     wlarc='${wl}'
 
@@ -4644,12 +4301,11 @@ dnl Note also adjust exclude_expsyms for C++ above.
         _LT_TAGVAR(ld_shlibs, $1)=no
         cat <<_LT_EOF 1>&2
 
-*** Warning: the GNU linker, at least up to release 2.19, is reported
+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
 *** to be unable to reliably create shared libraries on AIX.
 *** Therefore, libtool is disabling shared libraries support.  If you
-*** really care for shared libraries, you may want to install binutils
-*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
-*** You will then need to restart the configuration process.
+*** really care for shared libraries, you may want to modify your PATH
+*** so that a non-GNU linker is found, and then restart.
 
 _LT_EOF
       fi
@@ -4685,12 +4341,10 @@ _LT_EOF
       # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
       # as there is no search path for DLLs.
       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
       _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
       _LT_TAGVAR(always_export_symbols, $1)=no
       _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-      _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
-      _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
+      _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
 
       if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
         _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
@@ -4708,11 +4362,6 @@ _LT_EOF
       fi
       ;;
 
-    haiku*)
-      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      _LT_TAGVAR(link_all_deplibs, $1)=yes
-      ;;
-
     interix[[3-9]]*)
       _LT_TAGVAR(hardcode_direct, $1)=no
       _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
@@ -4738,16 +4387,15 @@ _LT_EOF
       if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
          && test "$tmp_diet" = no
       then
-        tmp_addflag=' $pic_flag'
+        tmp_addflag=
         tmp_sharedflag='-shared'
         case $cc_basename,$host_cpu in
         pgcc*)                          # Portland Group C compiler
-          _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+          _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
           tmp_addflag=' $pic_flag'
           ;;
-        pgf77* | pgf90* | pgf95* | pgfortran*)
-                                        # Portland Group f77 and f90 compilers
-          _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+        pgf77* | pgf90* | pgf95*)       # Portland Group f77 and f90 compilers
+          _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
           tmp_addflag=' $pic_flag -Mnomain' ;;
         ecc*,ia64* | icc*,ia64*)        # Intel C compiler on ia64
           tmp_addflag=' -i_dynamic' ;;
@@ -4758,17 +4406,13 @@ _LT_EOF
         lf95*)                          # Lahey Fortran 8.1
           _LT_TAGVAR(whole_archive_flag_spec, $1)=
           tmp_sharedflag='--shared' ;;
-        xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+        xl[[cC]]*)                      # IBM XL C 8.0 on PPC (deal with xlf below)
           tmp_sharedflag='-qmkshrobj'
           tmp_addflag= ;;
-        nvcc*)  # Cuda Compiler Driver 2.2
-          _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
-          _LT_TAGVAR(compiler_needs_object, $1)=yes
-          ;;
         esac
         case `$CC -V 2>&1 | sed 5q` in
         *Sun\ C*)                       # Sun C 5.9
-          _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+          _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
           _LT_TAGVAR(compiler_needs_object, $1)=yes
           tmp_sharedflag='-G' ;;
         *Sun\ F*)                       # Sun Fortran 8.3
@@ -4784,17 +4428,17 @@ _LT_EOF
         fi
 
         case $cc_basename in
-        xlf* | bgf* | bgxlf* | mpixlf*)
+        xlf*)
           # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
           _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
           _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
           _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
-          _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+          _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
           if test "x$supports_anon_versioning" = xyes; then
             _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
               cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
               echo "local: *; };" >> $output_objdir/$libname.ver~
-              $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+              $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
           fi
           ;;
         esac
@@ -4808,8 +4452,8 @@ _LT_EOF
         _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
         wlarc=
       else
-        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
       fi
       ;;
 
@@ -4827,8 +4471,8 @@ _LT_EOF
 
 _LT_EOF
       elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
       else
         _LT_TAGVAR(ld_shlibs, $1)=no
       fi
@@ -4874,8 +4518,8 @@ _LT_EOF
 
     *)
       if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
       else
         _LT_TAGVAR(ld_shlibs, $1)=no
       fi
@@ -4915,10 +4559,8 @@ _LT_EOF
       else
         # If we're using GNU nm, then we don't want the "-C" option.
         # -C means demangle to AIX nm, but means don't demangle with GNU nm
-        # Also, AIX nm treats weak defined symbols like other global
-        # defined symbols, whereas GNU nm marks them as "W".
         if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
-          _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+          _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
         else
           _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
         fi
@@ -5006,9 +4648,9 @@ _LT_EOF
         _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
         # Determine the default libpath from the value encoded in an
         # empty executable.
-        _LT_SYS_MODULE_PATH_AIX([$1])
+        _LT_SYS_MODULE_PATH_AIX
         _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
       else
         if test "$host_cpu" = ia64; then
           _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
@@ -5017,19 +4659,14 @@ _LT_EOF
         else
          # Determine the default libpath from the value encoded in an
          # empty executable.
-         _LT_SYS_MODULE_PATH_AIX([$1])
+         _LT_SYS_MODULE_PATH_AIX
          _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
           # Warning - without using the other run time loading flags,
           # -berok will link without error, but may produce a broken library.
           _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
           _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-          if test "$with_gnu_ld" = yes; then
-            # We only use this code for GNU lds that support --whole-archive.
-            _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
-          else
-            # Exported symbols can be pulled into shared objects from archives
-            _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
-          fi
+          # Exported symbols can be pulled into shared objects from archives
+          _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
           _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
           # This is similar to how AIX traditionally builds its shared libraries.
           _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
@@ -5061,63 +4698,20 @@ _LT_EOF
       # Microsoft Visual C++.
       # hardcode_libdir_flag_spec is actually meaningless, as there is
       # no search path for DLLs.
-      case $cc_basename in
-      cl*)
-        # Native MSVC
-        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
-        _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-        _LT_TAGVAR(always_export_symbols, $1)=yes
-        _LT_TAGVAR(file_list_spec, $1)='@'
-        # Tell ltmain to make .lib files, not .a files.
-        libext=lib
-        # Tell ltmain to make .dll files, not .so files.
-        shrext_cmds=".dll"
-        # FIXME: Setting linknames here is a bad hack.
-        _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
-        _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-            sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
-          else
-            sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
-          fi~
-          $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
-          linknames='
-        # The linker will not automatically build a static lib if we build a DLL.
-        # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
-        _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-        _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
-        # Don't use ranlib
-        _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
-        _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
-          lt_tool_outputfile="@TOOL_OUTPUT@"~
-          case $lt_outputfile in
-            *.exe|*.EXE) ;;
-            *)
-              lt_outputfile="$lt_outputfile.exe"
-              lt_tool_outputfile="$lt_tool_outputfile.exe"
-              ;;
-          esac~
-          if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
-            $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
-            $RM "$lt_outputfile.manifest";
-          fi'
-        ;;
-      *)
-        # Assume MSVC wrapper
-        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
-        _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-        # Tell ltmain to make .lib files, not .a files.
-        libext=lib
-        # Tell ltmain to make .dll files, not .so files.
-        shrext_cmds=".dll"
-        # FIXME: Setting linknames here is a bad hack.
-        _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
-        # The linker will automatically build a .lib file if we build a DLL.
-        _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
-        # FIXME: Should let the user specify the lib program.
-        _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
-        _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-        ;;
-      esac
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+      # Tell ltmain to make .lib files, not .a files.
+      libext=lib
+      # Tell ltmain to make .dll files, not .so files.
+      shrext_cmds=".dll"
+      # FIXME: Setting linknames here is a bad hack.
+      _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames='
+      # The linker will automatically build a .lib file if we build a DLL.
+      _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+      # FIXME: Should let the user specify the lib program.
+      _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
+      _LT_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
+      _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
       ;;
 
     darwin* | rhapsody*)
@@ -5155,7 +4749,7 @@ _LT_EOF
 
     # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
     freebsd* | dragonfly*)
-      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+      _LT_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
       _LT_TAGVAR(hardcode_direct, $1)=yes
       _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
@@ -5163,7 +4757,7 @@ _LT_EOF
 
     hpux9*)
       if test "$GCC" = yes; then
-        _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+        _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
       else
         _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
       fi
@@ -5178,8 +4772,8 @@ _LT_EOF
       ;;
 
     hpux10*)
-      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
-        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
       else
         _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
       fi
@@ -5197,16 +4791,16 @@ _LT_EOF
       ;;
 
     hpux11*)
-      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
         case $host_cpu in
         hppa*64*)
           _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
           ;;
         ia64*)
-          _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
           ;;
         *)
-          _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
           ;;
         esac
       else
@@ -5218,14 +4812,7 @@ _LT_EOF
           _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
           ;;
         *)
-        m4_if($1, [], [
-          # Older versions of the 11.00 compiler do not understand -b yet
-          # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
-          _LT_LINKER_OPTION([if $CC understands -b],
-            _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b],
-            [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'],
-            [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])],
-          [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'])
+          _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
           ;;
         esac
       fi
@@ -5253,34 +4840,19 @@ _LT_EOF
 
     irix5* | irix6* | nonstopux*)
       if test "$GCC" = yes; then
-        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
         # Try to use the -exported_symbol ld option, if it does not
         # work, assume that -exports_file does not work either and
         # implicitly export all symbols.
-        # This should be the same for all languages, so no per-tag cache variable.
-        AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol],
-          [lt_cv_irix_exported_symbol],
-          [save_LDFLAGS="$LDFLAGS"
-           LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
-           AC_LINK_IFELSE(
-             [AC_LANG_SOURCE(
-                [AC_LANG_CASE([C], [[int foo (void) { return 0; }]],
-                              [C++], [[int foo (void) { return 0; }]],
-                              [Fortran 77], [[
-      subroutine foo
-      end]],
-                              [Fortran], [[
-      subroutine foo
-      end]])])],
-              [lt_cv_irix_exported_symbol=yes],
-              [lt_cv_irix_exported_symbol=no])
-           LDFLAGS="$save_LDFLAGS"])
-        if test "$lt_cv_irix_exported_symbol" = yes; then
-          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
-        fi
+        save_LDFLAGS="$LDFLAGS"
+        LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+        AC_LINK_IFELSE(int foo(void) {},
+          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+        )
+        LDFLAGS="$save_LDFLAGS"
       else
-        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
-        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
       fi
       _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
@@ -5342,17 +4914,17 @@ _LT_EOF
       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
       _LT_TAGVAR(hardcode_minus_L, $1)=yes
       _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-      _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
       _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
       ;;
 
     osf3*)
       if test "$GCC" = yes; then
         _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
       else
         _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
       fi
       _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
@@ -5362,13 +4934,13 @@ _LT_EOF
     osf4* | osf5*)      # as osf3* with the addition of -msym flag
       if test "$GCC" = yes; then
         _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
         _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
       else
         _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
         _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
-        $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+        $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
 
         # Both c and cxx compiler support -rpath directly
         _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
@@ -5381,9 +4953,9 @@ _LT_EOF
       _LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
       if test "$GCC" = yes; then
         wlarc='${wl}'
-        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+        _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
         _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-          $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+          $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
       else
         case `$CC -V 2>&1` in
         *"Compilers 5.0"*)
@@ -5559,38 +5131,36 @@ x|xyes)
       # Test whether the compiler implicitly links with -lc since on some
       # systems, -lgcc has to come before -lc. If gcc already passes -lc
       # to ld, don't add -lc before -lgcc.
-      AC_CACHE_CHECK([whether -lc should be explicitly linked in],
-        [lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1),
-        [$RM conftest*
-        echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
-        if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
-          soname=conftest
-          lib=conftest
-          libobjs=conftest.$ac_objext
-          deplibs=
-          wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
-          pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
-          compiler_flags=-v
-          linker_flags=-v
-          verstring=
-          output_objdir=.
-          libname=conftest
-          lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
-          _LT_TAGVAR(allow_undefined_flag, $1)=
-          if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
-          then
-            lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no
-          else
-            lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
-          fi
-          _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
-        else
-          cat conftest.err 1>&5
-        fi
-        $RM conftest*
-        ])
-      _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)
+      AC_MSG_CHECKING([whether -lc should be explicitly linked in])
+      $RM conftest*
+      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+      if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
+        soname=conftest
+        lib=conftest
+        libobjs=conftest.$ac_objext
+        deplibs=
+        wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
+        pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
+        compiler_flags=-v
+        linker_flags=-v
+        verstring=
+        output_objdir=.
+        libname=conftest
+        lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
+        _LT_TAGVAR(allow_undefined_flag, $1)=
+        if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
+        then
+          _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+        else
+          _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+        fi
+        _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
+      else
+        cat conftest.err 1>&5
+      fi
+      $RM conftest*
+      AC_MSG_RESULT([$_LT_TAGVAR(archive_cmds_need_lc, $1)])
       ;;
     esac
   fi
@@ -5655,6 +5225,8 @@ _LT_TAGDECL([], [inherit_rpath], [0],
     to runtime path list])
 _LT_TAGDECL([], [link_all_deplibs], [0],
     [Whether libtool must link a program against all its dependency libraries])
+_LT_TAGDECL([], [fix_srcfile_path], [1],
+    [Fix the shell variable $srcfile for the compiler])
 _LT_TAGDECL([], [always_export_symbols], [0],
     [Set to "yes" if exported symbols are required])
 _LT_TAGDECL([], [export_symbols_cmds], [2],
@@ -5665,8 +5237,6 @@ _LT_TAGDECL([], [include_expsyms], [1],
     [Symbols that must always be exported])
 _LT_TAGDECL([], [prelink_cmds], [2],
     [Commands necessary for linking programs (against libraries) with templates])
-_LT_TAGDECL([], [postlink_cmds], [2],
-    [Commands necessary for finishing linking programs])
 _LT_TAGDECL([], [file_list_spec], [1],
     [Specify filename containing input files])
 dnl FIXME: Not yet implemented
@@ -5760,15 +5330,14 @@ CC="$lt_save_CC"
 ])# _LT_LANG_C_CONFIG
 
 
-# _LT_LANG_CXX_CONFIG([TAG])
-# --------------------------
-# Ensure that the configuration variables for a C++ compiler are suitably
-# defined.  These variables are subsequently used by _LT_CONFIG to write
-# the compiler configuration to `libtool'.
-m4_defun([_LT_LANG_CXX_CONFIG],
-[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_DECL_EGREP])dnl
-m4_require([_LT_PATH_MANIFEST_TOOL])dnl
+# _LT_PROG_CXX
+# ------------
+# Since AC_PROG_CXX is broken, in that it returns g++ if there is no c++
+# compiler, we have our own version here.
+m4_defun([_LT_PROG_CXX],
+[
+pushdef([AC_MSG_ERROR], [_lt_caught_CXX_error=yes])
+AC_PROG_CXX
 if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
     ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
     (test "X$CXX" != "Xg++"))) ; then
@@ -5776,6 +5345,22 @@ if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
 else
   _lt_caught_CXX_error=yes
 fi
+popdef([AC_MSG_ERROR])
+])# _LT_PROG_CXX
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([_LT_PROG_CXX], [])
+
+
+# _LT_LANG_CXX_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for a C++ compiler are suitably
+# defined.  These variables are subsequently used by _LT_CONFIG to write
+# the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_CXX_CONFIG],
+[AC_REQUIRE([_LT_PROG_CXX])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_EGREP])dnl
 
 AC_LANG_PUSH(C++)
 _LT_TAGVAR(archive_cmds_need_lc, $1)=no
@@ -5797,8 +5382,6 @@ _LT_TAGVAR(module_cmds, $1)=
 _LT_TAGVAR(module_expsym_cmds, $1)=
 _LT_TAGVAR(link_all_deplibs, $1)=unknown
 _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_TAGVAR(reload_flag, $1)=$reload_flag
-_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
 _LT_TAGVAR(no_undefined_flag, $1)=
 _LT_TAGVAR(whole_archive_flag_spec, $1)=
 _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
@@ -5830,7 +5413,6 @@ if test "$_lt_caught_CXX_error" != yes; then
 
   # Allow CC to be a program name with arguments.
   lt_save_CC=$CC
-  lt_save_CFLAGS=$CFLAGS
   lt_save_LD=$LD
   lt_save_GCC=$GCC
   GCC=$GXX
@@ -5848,7 +5430,6 @@ if test "$_lt_caught_CXX_error" != yes; then
   fi
   test -z "${LDCXX+set}" || LD=$LDCXX
   CC=${CXX-"c++"}
-  CFLAGS=$CXXFLAGS
   compiler=$CC
   _LT_TAGVAR(compiler, $1)=$CC
   _LT_CC_BASENAME([$compiler])
@@ -5870,8 +5451,8 @@ if test "$_lt_caught_CXX_error" != yes; then
       # Check if GNU C++ uses GNU ld as the underlying linker, since the
       # archiving commands below assume that GNU ld is being used.
       if test "$with_gnu_ld" = yes; then
-        _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
 
         _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
         _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
@@ -5903,7 +5484,7 @@ if test "$_lt_caught_CXX_error" != yes; then
       # Commands to make compiler produce verbose output that lists
       # what "hidden" libraries, object files and flags are used when
       # linking a shared library.
-      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
 
     else
       GXX=no
@@ -6012,10 +5593,10 @@ if test "$_lt_caught_CXX_error" != yes; then
           _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
           # Determine the default libpath from the value encoded in an empty
           # executable.
-          _LT_SYS_MODULE_PATH_AIX([$1])
+          _LT_SYS_MODULE_PATH_AIX
           _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
 
-          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
         else
           if test "$host_cpu" = ia64; then
             _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
@@ -6024,19 +5605,14 @@ if test "$_lt_caught_CXX_error" != yes; then
           else
             # Determine the default libpath from the value encoded in an
             # empty executable.
-            _LT_SYS_MODULE_PATH_AIX([$1])
+            _LT_SYS_MODULE_PATH_AIX
             _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
             # Warning - without using the other run time loading flags,
             # -berok will link without error, but may produce a broken library.
             _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
             _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-            if test "$with_gnu_ld" = yes; then
-              # We only use this code for GNU lds that support --whole-archive.
-              _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
-            else
-              # Exported symbols can be pulled into shared objects from archives
-              _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
-            fi
+            # Exported symbols can be pulled into shared objects from archives
+            _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
             _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
             # This is similar to how AIX traditionally builds its shared
             # libraries.
@@ -6066,75 +5642,28 @@ if test "$_lt_caught_CXX_error" != yes; then
         ;;
 
       cygwin* | mingw* | pw32* | cegcc*)
-        case $GXX,$cc_basename in
-        ,cl* | no,cl*)
-          # Native MSVC
-          # hardcode_libdir_flag_spec is actually meaningless, as there is
-          # no search path for DLLs.
-          _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
-          _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-          _LT_TAGVAR(always_export_symbols, $1)=yes
-          _LT_TAGVAR(file_list_spec, $1)='@'
-          # Tell ltmain to make .lib files, not .a files.
-          libext=lib
-          # Tell ltmain to make .dll files, not .so files.
-          shrext_cmds=".dll"
-          # FIXME: Setting linknames here is a bad hack.
-          _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
-          _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-              $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
-            else
-              $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
-            fi~
-            $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
-            linknames='
-          # The linker will not automatically build a static lib if we build a DLL.
-          # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
-          _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-          # Don't use ranlib
-          _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
-          _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
-            lt_tool_outputfile="@TOOL_OUTPUT@"~
-            case $lt_outputfile in
-              *.exe|*.EXE) ;;
-              *)
-                lt_outputfile="$lt_outputfile.exe"
-                lt_tool_outputfile="$lt_tool_outputfile.exe"
-                ;;
-            esac~
-            func_to_tool_file "$lt_outputfile"~
-            if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
-              $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
-              $RM "$lt_outputfile.manifest";
-            fi'
-          ;;
-        *)
-          # g++
-          # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
-          # as there is no search path for DLLs.
-          _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-          _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
-          _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-          _LT_TAGVAR(always_export_symbols, $1)=no
-          _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-
-          if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
-            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-            # If the export-symbols file already is a .def file (1st line
-            # is EXPORTS), use it as is; otherwise, prepend...
-            _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-              cp $export_symbols $output_objdir/$soname.def;
-            else
-              echo EXPORTS > $output_objdir/$soname.def;
-              cat $export_symbols >> $output_objdir/$soname.def;
-            fi~
-            $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-          else
-            _LT_TAGVAR(ld_shlibs, $1)=no
-          fi
-          ;;
-        esac
-        ;;
+        # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+        # as there is no search path for DLLs.
+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+        _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+        _LT_TAGVAR(always_export_symbols, $1)=no
+        _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+
+        if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+          # If the export-symbols file already is a .def file (1st line
+          # is EXPORTS), use it as is; otherwise, prepend...
+          _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+            cp $export_symbols $output_objdir/$soname.def;
+          else
+            echo EXPORTS > $output_objdir/$soname.def;
+            cat $export_symbols >> $output_objdir/$soname.def;
+          fi~
+          $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+        else
+          _LT_TAGVAR(ld_shlibs, $1)=no
+        fi
+        ;;
       darwin* | rhapsody*)
         _LT_DARWIN_LINKER_FEATURES($1)
         ;;
@@ -6176,11 +5705,6 @@ if test "$_lt_caught_CXX_error" != yes; then
       gnu*)
         ;;
 
-      haiku*)
-        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-        _LT_TAGVAR(link_all_deplibs, $1)=yes
-        ;;
-
       hpux9*)
         _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
         _LT_TAGVAR(hardcode_libdir_separator, $1)=:
@@ -6205,11 +5729,11 @@ if test "$_lt_caught_CXX_error" != yes; then
             # explicitly linking system object files so we need to strip them
             # from the output so that they don't get included in the library
             # dependencies.
-            output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+            output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
             ;;
           *)
             if test "$GXX" = yes; then
-              _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+              _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
             else
               # FIXME: insert proper C++ library support
               _LT_TAGVAR(ld_shlibs, $1)=no
@@ -6270,7 +5794,7 @@ if test "$_lt_caught_CXX_error" != yes; then
             # explicitly linking system object files so we need to strip them
             # from the output so that they don't get included in the library
             # dependencies.
-            output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+            output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
             ;;
           *)
             if test "$GXX" = yes; then
@@ -6280,10 +5804,10 @@ if test "$_lt_caught_CXX_error" != yes; then
                     _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
                     ;;
                   ia64*)
-                    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+                    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
                     ;;
                   *)
-                    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+                    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
                     ;;
                 esac
               fi
@@ -6313,7 +5837,7 @@ if test "$_lt_caught_CXX_error" != yes; then
         case $cc_basename in
           CC*)
             # SGI C++
-            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
 
             # Archives containing C++ object files must be created using
             # "CC -ar", where "CC" is the IRIX C++ compiler.  This is
@@ -6324,9 +5848,9 @@ if test "$_lt_caught_CXX_error" != yes; then
           *)
             if test "$GXX" = yes; then
               if test "$with_gnu_ld" = no; then
-                _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+                _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
               else
-                _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib'
+                _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib'
               fi
             fi
             _LT_TAGVAR(link_all_deplibs, $1)=yes
@@ -6355,7 +5879,7 @@ if test "$_lt_caught_CXX_error" != yes; then
             # explicitly linking system object files so we need to strip them
             # from the output so that they don't get included in the library
             # dependencies.
-            output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+            output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
 
             _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
             _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
@@ -6392,26 +5916,26 @@ if test "$_lt_caught_CXX_error" != yes; then
           pgCC* | pgcpp*)
             # Portland Group C++ compiler
             case `$CC -V` in
-            *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*)
+            *pgCC\ [[1-5]]* | *pgcpp\ [[1-5]]*)
               _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
                 rm -rf $tpldir~
                 $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
-                compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
+                compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"'
               _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
                 rm -rf $tpldir~
                 $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
-                $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
+                $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~
                 $RANLIB $oldlib'
               _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
                 rm -rf $tpldir~
                 $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
-                $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+                $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
               _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
                 rm -rf $tpldir~
                 $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
-                $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+                $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
               ;;
-            *) # Version 6 and above use weak symbols
+            *) # Version 6 will use weak symbols
               _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
               _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
               ;;
@@ -6419,7 +5943,7 @@ if test "$_lt_caught_CXX_error" != yes; then
 
             _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
             _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-            _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+            _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
             ;;
           cxx*)
             # Compaq C++
@@ -6438,9 +5962,9 @@ if test "$_lt_caught_CXX_error" != yes; then
             # explicitly linking system object files so we need to strip them
             # from the output so that they don't get included in the library
             # dependencies.
-            output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
+            output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
             ;;
-          xl* | mpixl* | bgxl*)
+          xl*)
             # IBM XL 8.0 on PPC, with GNU ld
             _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
             _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
@@ -6460,13 +5984,13 @@ if test "$_lt_caught_CXX_error" != yes; then
               _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
               _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
               _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-              _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+              _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
               _LT_TAGVAR(compiler_needs_object, $1)=yes
 
               # Not sure whether something based on
               # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
               # would be better.
-              output_verbose_link_cmd='func_echo_all'
+              output_verbose_link_cmd='echo'
 
               # Archives containing C++ object files must be created using
               # "CC -xar", where "CC" is the Sun C++ compiler.  This is
@@ -6535,7 +6059,7 @@ if test "$_lt_caught_CXX_error" != yes; then
             _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
             _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
           fi
-          output_verbose_link_cmd=func_echo_all
+          output_verbose_link_cmd=echo
         else
           _LT_TAGVAR(ld_shlibs, $1)=no
         fi
@@ -6570,15 +6094,15 @@ if test "$_lt_caught_CXX_error" != yes; then
             case $host in
               osf3*)
                 _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-                _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+                _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
                 _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
                 ;;
               *)
                 _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-                _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+                _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
                 _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
                   echo "-hidden">> $lib.exp~
-                  $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp  `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~
+                  $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp  `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~
                   $RM $lib.exp'
                 _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
                 ;;
@@ -6594,17 +6118,17 @@ if test "$_lt_caught_CXX_error" != yes; then
             # explicitly linking system object files so we need to strip them
             # from the output so that they don't get included in the library
             # dependencies.
-            output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+            output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
             ;;
           *)
             if test "$GXX" = yes && test "$with_gnu_ld" = no; then
               _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
               case $host in
                 osf3*)
-                  _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+                  _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
                   ;;
                 *)
-                  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+                  _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
                   ;;
               esac
 
@@ -6614,7 +6138,7 @@ if test "$_lt_caught_CXX_error" != yes; then
               # Commands to make compiler produce verbose output that lists
               # what "hidden" libraries, object files and flags are used when
               # linking a shared library.
-              output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+              output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
 
             else
               # FIXME: insert proper C++ library support
@@ -6650,7 +6174,7 @@ if test "$_lt_caught_CXX_error" != yes; then
 
       solaris*)
         case $cc_basename in
-          CC* | sunCC*)
+          CC*)
             # Sun C++ 4.2, 5.x and Centerline C++
             _LT_TAGVAR(archive_cmds_need_lc,$1)=yes
             _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
@@ -6671,7 +6195,7 @@ if test "$_lt_caught_CXX_error" != yes; then
             esac
             _LT_TAGVAR(link_all_deplibs, $1)=yes
 
-            output_verbose_link_cmd='func_echo_all'
+            output_verbose_link_cmd='echo'
 
             # Archives containing C++ object files must be created using
             # "CC -xar", where "CC" is the Sun C++ compiler.  This is
@@ -6691,14 +6215,14 @@ if test "$_lt_caught_CXX_error" != yes; then
             if test "$GXX" = yes && test "$with_gnu_ld" = no; then
               _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
               if $CC --version | $GREP -v '^2\.7' > /dev/null; then
-                _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+                _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
                 _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-                  $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+                  $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
 
                 # Commands to make compiler produce verbose output that lists
                 # what "hidden" libraries, object files and flags are used when
                 # linking a shared library.
-                output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+                output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
               else
                 # g++ 2.7 appears to require `-G' NOT `-shared' on this
                 # platform.
@@ -6709,7 +6233,7 @@ if test "$_lt_caught_CXX_error" != yes; then
                 # Commands to make compiler produce verbose output that lists
                 # what "hidden" libraries, object files and flags are used when
                 # linking a shared library.
-                output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+                output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
               fi
 
               _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
@@ -6763,10 +6287,6 @@ if test "$_lt_caught_CXX_error" != yes; then
           CC*)
             _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
             _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-            _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~
-              '"$_LT_TAGVAR(old_archive_cmds, $1)"
-            _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~
-              '"$_LT_TAGVAR(reload_cmds, $1)"
             ;;
           *)
             _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
@@ -6822,7 +6342,6 @@ if test "$_lt_caught_CXX_error" != yes; then
   fi # test -n "$compiler"
 
   CC=$lt_save_CC
-  CFLAGS=$lt_save_CFLAGS
   LDCXX=$LD
   LD=$lt_save_LD
   GCC=$lt_save_GCC
@@ -6837,29 +6356,6 @@ AC_LANG_POP
 ])# _LT_LANG_CXX_CONFIG
 
 
-# _LT_FUNC_STRIPNAME_CNF
-# ----------------------
-# func_stripname_cnf prefix suffix name
-# strip PREFIX and SUFFIX off of NAME.
-# PREFIX and SUFFIX must not contain globbing or regex special
-# characters, hashes, percent signs, but SUFFIX may contain a leading
-# dot (in which case that matches only a dot).
-#
-# This function is identical to the (non-XSI) version of func_stripname,
-# except this one can be used by m4 code that may be executed by configure,
-# rather than the libtool script.
-m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl
-AC_REQUIRE([_LT_DECL_SED])
-AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])
-func_stripname_cnf ()
-{
-  case ${2} in
-  .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
-  *)  func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
-  esac
-} # func_stripname_cnf
-])# _LT_FUNC_STRIPNAME_CNF
-
 # _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
 # ---------------------------------
 # Figure out "hidden" library dependencies from verbose
@@ -6868,7 +6364,6 @@ func_stripname_cnf ()
 # objects, libraries and library flags.
 m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
 [m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl
 # Dependencies to place before and after the object being linked:
 _LT_TAGVAR(predep_objects, $1)=
 _LT_TAGVAR(postdep_objects, $1)=
@@ -6919,13 +6414,6 @@ public class foo {
 };
 _LT_EOF
 ])
-
-_lt_libdeps_save_CFLAGS=$CFLAGS
-case "$CC $CFLAGS " in #(
-*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;;
-*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;;
-esac
-
 dnl Parse the compiler output and extract the necessary
 dnl objects, libraries and library flags.
 if AC_TRY_EVAL(ac_compile); then
@@ -6937,7 +6425,7 @@ if AC_TRY_EVAL(ac_compile); then
   pre_test_object_deps_done=no
 
   for p in `eval "$output_verbose_link_cmd"`; do
-    case ${prev}${p} in
+    case $p in
 
     -L* | -R* | -l*)
        # Some compilers place space between "-{L,R}" and the path.
@@ -6946,22 +6434,13 @@ if AC_TRY_EVAL(ac_compile); then
           test $p = "-R"; then
          prev=$p
          continue
+       else
+         prev=
        fi
 
-       # Expand the sysroot to ease extracting the directories later.
-       if test -z "$prev"; then
-         case $p in
-         -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;;
-         -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;;
-         -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;;
-         esac
-       fi
-       case $p in
-       =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
-       esac
        if test "$pre_test_object_deps_done" = no; then
-         case ${prev} in
-         -L | -R)
+         case $p in
+         -L* | -R*)
            # Internal compiler library paths should come after those
            # provided the user.  The postdeps already come after the
            # user supplied libs so there is no need to process them.
@@ -6981,10 +6460,8 @@ if AC_TRY_EVAL(ac_compile); then
            _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}"
          fi
        fi
-       prev=
        ;;
 
-    *.lto.$objext) ;; # Ignore GCC LTO objects
     *.$objext)
        # This assumes that the test object file only shows up
        # once in the compiler output.
@@ -7020,7 +6497,6 @@ else
 fi
 
 $RM -f confest.$objext
-CFLAGS=$_lt_libdeps_save_CFLAGS
 
 # PORTME: override above test on systems where it is broken
 m4_if([$1], [CXX],
@@ -7057,7 +6533,7 @@ linux*)
 
 solaris*)
   case $cc_basename in
-  CC* | sunCC*)
+  CC*)
     # The more standards-conforming stlport4 library is
     # incompatible with the Cstd library. Avoid specifying
     # it if it's in CXXFLAGS. Ignore libCrun as
@@ -7101,16 +6577,32 @@ _LT_TAGDECL([], [compiler_lib_search_path], [1],
 ])# _LT_SYS_HIDDEN_LIBDEPS
 
 
+# _LT_PROG_F77
+# ------------
+# Since AC_PROG_F77 is broken, in that it returns the empty string
+# if there is no fortran compiler, we have our own version here.
+m4_defun([_LT_PROG_F77],
+[
+pushdef([AC_MSG_ERROR], [_lt_disable_F77=yes])
+AC_PROG_F77
+if test -z "$F77" || test "X$F77" = "Xno"; then
+  _lt_disable_F77=yes
+fi
+popdef([AC_MSG_ERROR])
+])# _LT_PROG_F77
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([_LT_PROG_F77], [])
+
+
 # _LT_LANG_F77_CONFIG([TAG])
 # --------------------------
 # Ensure that the configuration variables for a Fortran 77 compiler are
 # suitably defined.  These variables are subsequently used by _LT_CONFIG
 # to write the compiler configuration to `libtool'.
 m4_defun([_LT_LANG_F77_CONFIG],
-[AC_LANG_PUSH(Fortran 77)
-if test -z "$F77" || test "X$F77" = "Xno"; then
-  _lt_disable_F77=yes
-fi
+[AC_REQUIRE([_LT_PROG_F77])dnl
+AC_LANG_PUSH(Fortran 77)
 
 _LT_TAGVAR(archive_cmds_need_lc, $1)=no
 _LT_TAGVAR(allow_undefined_flag, $1)=
@@ -7129,8 +6621,6 @@ _LT_TAGVAR(module_cmds, $1)=
 _LT_TAGVAR(module_expsym_cmds, $1)=
 _LT_TAGVAR(link_all_deplibs, $1)=unknown
 _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_TAGVAR(reload_flag, $1)=$reload_flag
-_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
 _LT_TAGVAR(no_undefined_flag, $1)=
 _LT_TAGVAR(whole_archive_flag_spec, $1)=
 _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
@@ -7170,9 +6660,7 @@ if test "$_lt_disable_F77" != yes; then
   # Allow CC to be a program name with arguments.
   lt_save_CC="$CC"
   lt_save_GCC=$GCC
-  lt_save_CFLAGS=$CFLAGS
   CC=${F77-"f77"}
-  CFLAGS=$FFLAGS
   compiler=$CC
   _LT_TAGVAR(compiler, $1)=$CC
   _LT_CC_BASENAME([$compiler])
@@ -7226,24 +6714,38 @@ if test "$_lt_disable_F77" != yes; then
 
   GCC=$lt_save_GCC
   CC="$lt_save_CC"
-  CFLAGS="$lt_save_CFLAGS"
 fi # test "$_lt_disable_F77" != yes
 
 AC_LANG_POP
 ])# _LT_LANG_F77_CONFIG
 
 
+# _LT_PROG_FC
+# -----------
+# Since AC_PROG_FC is broken, in that it returns the empty string
+# if there is no fortran compiler, we have our own version here.
+m4_defun([_LT_PROG_FC],
+[
+pushdef([AC_MSG_ERROR], [_lt_disable_FC=yes])
+AC_PROG_FC
+if test -z "$FC" || test "X$FC" = "Xno"; then
+  _lt_disable_FC=yes
+fi
+popdef([AC_MSG_ERROR])
+])# _LT_PROG_FC
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([_LT_PROG_FC], [])
+
+
 # _LT_LANG_FC_CONFIG([TAG])
 # -------------------------
 # Ensure that the configuration variables for a Fortran compiler are
 # suitably defined.  These variables are subsequently used by _LT_CONFIG
 # to write the compiler configuration to `libtool'.
 m4_defun([_LT_LANG_FC_CONFIG],
-[AC_LANG_PUSH(Fortran)
-
-if test -z "$FC" || test "X$FC" = "Xno"; then
-  _lt_disable_FC=yes
-fi
+[AC_REQUIRE([_LT_PROG_FC])dnl
+AC_LANG_PUSH(Fortran)
 
 _LT_TAGVAR(archive_cmds_need_lc, $1)=no
 _LT_TAGVAR(allow_undefined_flag, $1)=
@@ -7262,8 +6764,6 @@ _LT_TAGVAR(module_cmds, $1)=
 _LT_TAGVAR(module_expsym_cmds, $1)=
 _LT_TAGVAR(link_all_deplibs, $1)=unknown
 _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_TAGVAR(reload_flag, $1)=$reload_flag
-_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
 _LT_TAGVAR(no_undefined_flag, $1)=
 _LT_TAGVAR(whole_archive_flag_spec, $1)=
 _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
@@ -7303,9 +6803,7 @@ if test "$_lt_disable_FC" != yes; then
   # Allow CC to be a program name with arguments.
   lt_save_CC="$CC"
   lt_save_GCC=$GCC
-  lt_save_CFLAGS=$CFLAGS
   CC=${FC-"f95"}
-  CFLAGS=$FCFLAGS
   compiler=$CC
   GCC=$ac_cv_fc_compiler_gnu
 
@@ -7361,8 +6859,7 @@ if test "$_lt_disable_FC" != yes; then
   fi # test -n "$compiler"
 
   GCC=$lt_save_GCC
-  CC=$lt_save_CC
-  CFLAGS=$lt_save_CFLAGS
+  CC="$lt_save_CC"
 fi # test "$_lt_disable_FC" != yes
 
 AC_LANG_POP
@@ -7399,12 +6896,10 @@ _LT_COMPILER_BOILERPLATE
 _LT_LINKER_BOILERPLATE
 
 # Allow CC to be a program name with arguments.
-lt_save_CC=$CC
-lt_save_CFLAGS=$CFLAGS
+lt_save_CC="$CC"
 lt_save_GCC=$GCC
 GCC=yes
 CC=${GCJ-"gcj"}
-CFLAGS=$GCJFLAGS
 compiler=$CC
 _LT_TAGVAR(compiler, $1)=$CC
 _LT_TAGVAR(LD, $1)="$LD"
@@ -7414,8 +6909,6 @@ _LT_CC_BASENAME([$compiler])
 _LT_TAGVAR(archive_cmds_need_lc, $1)=no
 
 _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_TAGVAR(reload_flag, $1)=$reload_flag
-_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
 
 ## CAVEAT EMPTOR:
 ## There is no encapsulation within the following macros, do not change
@@ -7435,8 +6928,7 @@ fi
 AC_LANG_RESTORE
 
 GCC=$lt_save_GCC
-CC=$lt_save_CC
-CFLAGS=$lt_save_CFLAGS
+CC="$lt_save_CC"
 ])# _LT_LANG_GCJ_CONFIG
 
 
@@ -7471,11 +6963,9 @@ _LT_LINKER_BOILERPLATE
 
 # Allow CC to be a program name with arguments.
 lt_save_CC="$CC"
-lt_save_CFLAGS=$CFLAGS
 lt_save_GCC=$GCC
 GCC=
 CC=${RC-"windres"}
-CFLAGS=
 compiler=$CC
 _LT_TAGVAR(compiler, $1)=$CC
 _LT_CC_BASENAME([$compiler])
@@ -7488,8 +6978,7 @@ fi
 
 GCC=$lt_save_GCC
 AC_LANG_RESTORE
-CC=$lt_save_CC
-CFLAGS=$lt_save_CFLAGS
+CC="$lt_save_CC"
 ])# _LT_LANG_RC_CONFIG
 
 
@@ -7548,15 +7037,6 @@ _LT_DECL([], [OBJDUMP], [1], [An object symbol dumper])
 AC_SUBST([OBJDUMP])
 ])
 
-# _LT_DECL_DLLTOOL
-# ----------------
-# Ensure DLLTOOL variable is set.
-m4_defun([_LT_DECL_DLLTOOL],
-[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-test -z "$DLLTOOL" && DLLTOOL=dlltool
-_LT_DECL([], [DLLTOOL], [1], [DLL creation program])
-AC_SUBST([DLLTOOL])
-])
 
 # _LT_DECL_SED
 # ------------
@@ -7650,8 +7130,8 @@ m4_defun([_LT_CHECK_SHELL_FEATURES],
 # Try some XSI features
 xsi_shell=no
 ( _lt_dummy="a/b/c"
-  test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
-      = c,a/b,b/c, \
+  test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
+      = c,a/b,, \
     && eval 'test $(( 1 + 1 )) -eq 2 \
     && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
   && xsi_shell=yes
@@ -7690,162 +7170,208 @@ _LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl
 ])# _LT_CHECK_SHELL_FEATURES
 
 
-# _LT_PROG_FUNCTION_REPLACE (FUNCNAME, REPLACEMENT-BODY)
-# ------------------------------------------------------
-# In `$cfgfile', look for function FUNCNAME delimited by `^FUNCNAME ()$' and
-# '^} FUNCNAME ', and replace its body with REPLACEMENT-BODY.
-m4_defun([_LT_PROG_FUNCTION_REPLACE],
-[dnl {
-sed -e '/^$1 ()$/,/^} # $1 /c\
-$1 ()\
-{\
-m4_bpatsubsts([$2], [$], [\\], [^\([     ]\)], [\\\1])
-} # Extended-shell $1 implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-])
+# _LT_PROG_XSI_SHELLFNS
+# ---------------------
+# Bourne and XSI compatible variants of some useful shell functions.
+m4_defun([_LT_PROG_XSI_SHELLFNS],
+[case $xsi_shell in
+  yes)
+    cat << \_LT_EOF >> "$cfgfile"
+
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
+{
+  case ${1} in
+    */*) func_dirname_result="${1%/*}${2}" ;;
+    *  ) func_dirname_result="${3}" ;;
+  esac
+}
 
+# func_basename file
+func_basename ()
+{
+  func_basename_result="${1##*/}"
+}
 
-# _LT_PROG_REPLACE_SHELLFNS
-# -------------------------
-# Replace existing portable implementations of several shell functions with
-# equivalent extended shell implementations where those features are available..
-m4_defun([_LT_PROG_REPLACE_SHELLFNS],
-[if test x"$xsi_shell" = xyes; then
-  _LT_PROG_FUNCTION_REPLACE([func_dirname], [dnl
-    case ${1} in
-      */*) func_dirname_result="${1%/*}${2}" ;;
-      *  ) func_dirname_result="${3}" ;;
-    esac])
-
-  _LT_PROG_FUNCTION_REPLACE([func_basename], [dnl
-    func_basename_result="${1##*/}"])
-
-  _LT_PROG_FUNCTION_REPLACE([func_dirname_and_basename], [dnl
-    case ${1} in
-      */*) func_dirname_result="${1%/*}${2}" ;;
-      *  ) func_dirname_result="${3}" ;;
-    esac
-    func_basename_result="${1##*/}"])
+# func_dirname_and_basename file append nondir_replacement
+# perform func_basename and func_dirname in a single function
+# call:
+#   dirname:  Compute the dirname of FILE.  If nonempty,
+#             add APPEND to the result, otherwise set result
+#             to NONDIR_REPLACEMENT.
+#             value returned in "$func_dirname_result"
+#   basename: Compute filename of FILE.
+#             value retuned in "$func_basename_result"
+# Implementation must be kept synchronized with func_dirname
+# and func_basename. For efficiency, we do not delegate to
+# those functions but instead duplicate the functionality here.
+func_dirname_and_basename ()
+{
+  case ${1} in
+    */*) func_dirname_result="${1%/*}${2}" ;;
+    *  ) func_dirname_result="${3}" ;;
+  esac
+  func_basename_result="${1##*/}"
+}
 
-  _LT_PROG_FUNCTION_REPLACE([func_stripname], [dnl
-    # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
-    # positional parameters, so assign one to ordinary parameter first.
-    func_stripname_result=${3}
-    func_stripname_result=${func_stripname_result#"${1}"}
-    func_stripname_result=${func_stripname_result%"${2}"}])
+# func_stripname prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+func_stripname ()
+{
+  # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+  # positional parameters, so assign one to ordinary parameter first.
+  func_stripname_result=${3}
+  func_stripname_result=${func_stripname_result#"${1}"}
+  func_stripname_result=${func_stripname_result%"${2}"}
+}
 
-  _LT_PROG_FUNCTION_REPLACE([func_split_long_opt], [dnl
-    func_split_long_opt_name=${1%%=*}
-    func_split_long_opt_arg=${1#*=}])
+# func_opt_split
+func_opt_split ()
+{
+  func_opt_split_opt=${1%%=*}
+  func_opt_split_arg=${1#*=}
+}
 
-  _LT_PROG_FUNCTION_REPLACE([func_split_short_opt], [dnl
-    func_split_short_opt_arg=${1#??}
-    func_split_short_opt_name=${1%"$func_split_short_opt_arg"}])
+# func_lo2o object
+func_lo2o ()
+{
+  case ${1} in
+    *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
+    *)    func_lo2o_result=${1} ;;
+  esac
+}
 
-  _LT_PROG_FUNCTION_REPLACE([func_lo2o], [dnl
-    case ${1} in
-      *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
-      *)    func_lo2o_result=${1} ;;
-    esac])
+# func_xform libobj-or-source
+func_xform ()
+{
+  func_xform_result=${1%.*}.lo
+}
 
-  _LT_PROG_FUNCTION_REPLACE([func_xform], [    func_xform_result=${1%.*}.lo])
+# func_arith arithmetic-term...
+func_arith ()
+{
+  func_arith_result=$(( $[*] ))
+}
 
-  _LT_PROG_FUNCTION_REPLACE([func_arith], [    func_arith_result=$(( $[*] ))])
+# func_len string
+# STRING may not start with a hyphen.
+func_len ()
+{
+  func_len_result=${#1}
+}
 
-  _LT_PROG_FUNCTION_REPLACE([func_len], [    func_len_result=${#1}])
-fi
+_LT_EOF
+    ;;
+  *) # Bourne compatible functions.
+    cat << \_LT_EOF >> "$cfgfile"
 
-if test x"$lt_shell_append" = xyes; then
-  _LT_PROG_FUNCTION_REPLACE([func_append], [    eval "${1}+=\\${2}"])
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
+{
+  # Extract subdirectory from the argument.
+  func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
+  if test "X$func_dirname_result" = "X${1}"; then
+    func_dirname_result="${3}"
+  else
+    func_dirname_result="$func_dirname_result${2}"
+  fi
+}
 
-  _LT_PROG_FUNCTION_REPLACE([func_append_quoted], [dnl
-    func_quote_for_eval "${2}"
-dnl m4 expansion turns \\\\ into \\, and then the shell eval turns that into \
-    eval "${1}+=\\\\ \\$func_quote_for_eval_result"])
+# func_basename file
+func_basename ()
+{
+  func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
+}
 
-  # Save a `func_append' function call where possible by direct use of '+='
-  sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
-    && mv -f "$cfgfile.tmp" "$cfgfile" \
-      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-  test 0 -eq $? || _lt_function_replace_fail=:
-else
-  # Save a `func_append' function call even when '+=' is not available
-  sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
-    && mv -f "$cfgfile.tmp" "$cfgfile" \
-      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-  test 0 -eq $? || _lt_function_replace_fail=:
-fi
+dnl func_dirname_and_basename
+dnl A portable version of this function is already defined in general.m4sh
+dnl so there is no need for it here.
 
-if test x"$_lt_function_replace_fail" = x":"; then
-  AC_MSG_WARN([Unable to substitute extended shell functions in $ofile])
-fi
-])
+# func_stripname prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+# func_strip_suffix prefix name
+func_stripname ()
+{
+  case ${2} in
+    .*) func_stripname_result=`$ECHO "X${3}" \
+           | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;;
+    *)  func_stripname_result=`$ECHO "X${3}" \
+           | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;;
+  esac
+}
 
-# _LT_PATH_CONVERSION_FUNCTIONS
-# -----------------------------
-# Determine which file name conversion functions should be used by
-# func_to_host_file (and, implicitly, by func_to_host_path).  These are needed
-# for certain cross-compile configurations and native mingw.
-m4_defun([_LT_PATH_CONVERSION_FUNCTIONS],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_MSG_CHECKING([how to convert $build file names to $host format])
-AC_CACHE_VAL(lt_cv_to_host_file_cmd,
-[case $host in
-  *-*-mingw* )
-    case $build in
-      *-*-mingw* ) # actually msys
-        lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
-        ;;
-      *-*-cygwin* )
-        lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
-        ;;
-      * ) # otherwise, assume *nix
-        lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
-        ;;
-    esac
-    ;;
-  *-*-cygwin* )
-    case $build in
-      *-*-mingw* ) # actually msys
-        lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
-        ;;
-      *-*-cygwin* )
-        lt_cv_to_host_file_cmd=func_convert_file_noop
-        ;;
-      * ) # otherwise, assume *nix
-        lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
-        ;;
-    esac
-    ;;
-  * ) # unhandled hosts (and "normal" native builds)
-    lt_cv_to_host_file_cmd=func_convert_file_noop
-    ;;
+# sed scripts:
+my_sed_long_opt='1s/^\(-[[^=]]*\)=.*/\1/;q'
+my_sed_long_arg='1s/^-[[^=]]*=//'
+
+# func_opt_split
+func_opt_split ()
+{
+  func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"`
+  func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"`
+}
+
+# func_lo2o object
+func_lo2o ()
+{
+  func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"`
+}
+
+# func_xform libobj-or-source
+func_xform ()
+{
+  func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[[^.]]*$/.lo/'`
+}
+
+# func_arith arithmetic-term...
+func_arith ()
+{
+  func_arith_result=`expr "$[@]"`
+}
+
+# func_len string
+# STRING may not start with a hyphen.
+func_len ()
+{
+  func_len_result=`expr "$[1]" : ".*" 2>/dev/null || echo $max_cmd_len`
+}
+
+_LT_EOF
 esac
-])
-to_host_file_cmd=$lt_cv_to_host_file_cmd
-AC_MSG_RESULT([$lt_cv_to_host_file_cmd])
-_LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd],
-         [0], [convert $build file names to $host format])dnl
-
-AC_MSG_CHECKING([how to convert $build file names to toolchain format])
-AC_CACHE_VAL(lt_cv_to_tool_file_cmd,
-[#assume ordinary cross tools, or native build.
-lt_cv_to_tool_file_cmd=func_convert_file_noop
-case $host in
-  *-*-mingw* )
-    case $build in
-      *-*-mingw* ) # actually msys
-        lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
-        ;;
-    esac
+
+case $lt_shell_append in
+  yes)
+    cat << \_LT_EOF >> "$cfgfile"
+
+# func_append var value
+# Append VALUE to the end of shell variable VAR.
+func_append ()
+{
+  eval "$[1]+=\$[2]"
+}
+_LT_EOF
     ;;
-esac
+  *)
+    cat << \_LT_EOF >> "$cfgfile"
+
+# func_append var value
+# Append VALUE to the end of shell variable VAR.
+func_append ()
+{
+  eval "$[1]=\$$[1]\$[2]"
+}
+
+_LT_EOF
+    ;;
+  esac
 ])
-to_tool_file_cmd=$lt_cv_to_tool_file_cmd
-AC_MSG_RESULT([$lt_cv_to_tool_file_cmd])
-_LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd],
-         [0], [convert $build files to toolchain format])dnl
-])# _LT_PATH_CONVERSION_FUNCTIONS
diff --git a/m4/ltoptions.m4 b/m4/ltoptions.m4
index 17cfd51c..34151a3b 100644
--- a/m4/ltoptions.m4
+++ b/m4/ltoptions.m4
@@ -1,14 +1,13 @@
 # Helper functions for option handling.                    -*- Autoconf -*-
 #
-#   Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation,
-#   Inc.
+#   Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
 #   Written by Gary V. Vaughan, 2004
 #
 # This file is free software; the Free Software Foundation gives
 # unlimited permission to copy and/or distribute it, with or without
 # modifications, as long as this notice is preserved.
 
-# serial 7 ltoptions.m4
+# serial 6 ltoptions.m4
 
 # This is to help aclocal find these macros, as it can't see m4_define.
 AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
@@ -126,7 +125,7 @@ LT_OPTION_DEFINE([LT_INIT], [win32-dll],
 [enable_win32_dll=yes
 
 case $host in
-*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*)
+*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-cegcc*)
   AC_CHECK_TOOL(AS, as, false)
   AC_CHECK_TOOL(DLLTOOL, dlltool, false)
   AC_CHECK_TOOL(OBJDUMP, objdump, false)
@@ -134,13 +133,13 @@ case $host in
 esac
 
 test -z "$AS" && AS=as
-_LT_DECL([], [AS],      [1], [Assembler program])dnl
+_LT_DECL([], [AS],      [0], [Assembler program])dnl
 
 test -z "$DLLTOOL" && DLLTOOL=dlltool
-_LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl
+_LT_DECL([], [DLLTOOL], [0], [DLL creation program])dnl
 
 test -z "$OBJDUMP" && OBJDUMP=objdump
-_LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl
+_LT_DECL([], [OBJDUMP], [0], [Object dumper program])dnl
 ])# win32-dll
 
 AU_DEFUN([AC_LIBTOOL_WIN32_DLL],
diff --git a/m4/ltversion.m4 b/m4/ltversion.m4
index 9c7b5d41..f3c53098 100644
--- a/m4/ltversion.m4
+++ b/m4/ltversion.m4
@@ -7,17 +7,17 @@
 # unlimited permission to copy and/or distribute it, with or without
 # modifications, as long as this notice is preserved.
 
-# @configure_input@
+# Generated from ltversion.in.
 
-# serial 3293 ltversion.m4
+# serial 3017 ltversion.m4
 # This file is part of GNU Libtool
 
-m4_define([LT_PACKAGE_VERSION], [2.4])
-m4_define([LT_PACKAGE_REVISION], [1.3293])
+m4_define([LT_PACKAGE_VERSION], [2.2.6b])
+m4_define([LT_PACKAGE_REVISION], [1.3017])
 
 AC_DEFUN([LTVERSION_VERSION],
-[macro_version='2.4'
-macro_revision='1.3293'
+[macro_version='2.2.6b'
+macro_revision='1.3017'
 _LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
 _LT_DECL(, macro_revision, 0)
 ])
diff --git a/m4/lt~obsolete.m4 b/m4/lt~obsolete.m4
index c573da90..637bb206 100644
--- a/m4/lt~obsolete.m4
+++ b/m4/lt~obsolete.m4
@@ -1,13 +1,13 @@
 # lt~obsolete.m4 -- aclocal satisfying obsolete definitions.    -*-Autoconf-*-
 #
-#   Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc.
+#   Copyright (C) 2004, 2005, 2007 Free Software Foundation, Inc.
 #   Written by Scott James Remnant, 2004.
 #
 # This file is free software; the Free Software Foundation gives
 # unlimited permission to copy and/or distribute it, with or without
 # modifications, as long as this notice is preserved.
 
-# serial 5 lt~obsolete.m4
+# serial 4 lt~obsolete.m4
 
 # These exist entirely to fool aclocal when bootstrapping libtool.
 #
@@ -77,6 +77,7 @@ m4_ifndef([AC_DISABLE_FAST_INSTALL],	[AC_DEFUN([AC_DISABLE_FAST_INSTALL])])
 m4_ifndef([_LT_AC_LANG_CXX],            [AC_DEFUN([_LT_AC_LANG_CXX])])
 m4_ifndef([_LT_AC_LANG_F77],            [AC_DEFUN([_LT_AC_LANG_F77])])
 m4_ifndef([_LT_AC_LANG_GCJ],            [AC_DEFUN([_LT_AC_LANG_GCJ])])
+m4_ifndef([AC_LIBTOOL_RC],              [AC_DEFUN([AC_LIBTOOL_RC])])
 m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG],   [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])])
 m4_ifndef([_LT_AC_LANG_C_CONFIG],       [AC_DEFUN([_LT_AC_LANG_C_CONFIG])])
 m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])])
@@ -89,10 +90,3 @@ m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])])
 m4_ifndef([_LT_AC_LANG_RC_CONFIG],      [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])])
 m4_ifndef([AC_LIBTOOL_CONFIG],          [AC_DEFUN([AC_LIBTOOL_CONFIG])])
 m4_ifndef([_LT_AC_FILE_LTDLL_C],        [AC_DEFUN([_LT_AC_FILE_LTDLL_C])])
-m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS], [AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])])
-m4_ifndef([_LT_AC_PROG_CXXCPP],         [AC_DEFUN([_LT_AC_PROG_CXXCPP])])
-m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS], [AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])])
-m4_ifndef([_LT_PROG_ECHO_BACKSLASH],    [AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])])
-m4_ifndef([_LT_PROG_F77],               [AC_DEFUN([_LT_PROG_F77])])
-m4_ifndef([_LT_PROG_FC],                [AC_DEFUN([_LT_PROG_FC])])
-m4_ifndef([_LT_PROG_CXX],               [AC_DEFUN([_LT_PROG_CXX])])