-verion bumps for release

13 files changed, 2218 insertions, 4108 deletions

diff --git a/ltmain.sh b/ltmain.sh
index c7d06c3c..d88da2c2 100755
--- a/ltmain.sh
+++ b/ltmain.sh
@@ -1,9 +1,9 @@
+# Generated from ltmain.m4sh.
 
-# libtool (GNU libtool) 2.4.2
+# ltmain.sh (GNU libtool) 2.2.6b
 # Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
 
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
-# 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc.
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc.
 # This is free software; see the source for copying conditions.  There is NO
 # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
 
@@ -32,57 +32,50 @@
 #
 # Provide generalized library-building support services.
 #
-#       --config             show all configuration variables
-#       --debug              enable verbose shell tracing
-#   -n, --dry-run            display commands without modifying any files
-#       --features           display basic configuration information and exit
-#       --mode=MODE          use operation mode MODE
-#       --preserve-dup-deps  don't remove duplicate dependency libraries
-#       --quiet, --silent    don't print informational messages
-#       --no-quiet, --no-silent
-#                            print informational messages (default)
-#       --no-warn            don't display warning messages
-#       --tag=TAG            use configuration variables from tag TAG
-#   -v, --verbose            print more informational messages than default
-#       --no-verbose         don't print the extra informational messages
-#       --version            print version information
-#   -h, --help, --help-all   print short, long, or detailed help message
+#     --config             show all configuration variables
+#     --debug              enable verbose shell tracing
+# -n, --dry-run            display commands without modifying any files
+#     --features           display basic configuration information and exit
+#     --mode=MODE          use operation mode MODE
+#     --preserve-dup-deps  don't remove duplicate dependency libraries
+#     --quiet, --silent    don't print informational messages
+#     --tag=TAG            use configuration variables from tag TAG
+# -v, --verbose            print informational messages (default)
+#     --version            print version information
+# -h, --help               print short or long help message
 #
 # MODE must be one of the following:
 #
-#         clean              remove files from the build directory
-#         compile            compile a source file into a libtool object
-#         execute            automatically set library path, then run a program
-#         finish             complete the installation of libtool libraries
-#         install            install libraries or executables
-#         link               create a library or an executable
-#         uninstall          remove libraries from an installed directory
+#       clean              remove files from the build directory
+#       compile            compile a source file into a libtool object
+#       execute            automatically set library path, then run a program
+#       finish             complete the installation of libtool libraries
+#       install            install libraries or executables
+#       link               create a library or an executable
+#       uninstall          remove libraries from an installed directory
 #
-# MODE-ARGS vary depending on the MODE.  When passed as first option,
-# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that.
+# MODE-ARGS vary depending on the MODE.
 # Try `$progname --help --mode=MODE' for a more detailed description of MODE.
 #
 # When reporting a bug, please describe a test case to reproduce it and
 # include the following information:
 #
-#         host-triplet: $host
-#         shell:                $SHELL
-#         compiler:             $LTCC
-#         compiler flags:               $LTCFLAGS
-#         linker:               $LD (gnu? $with_gnu_ld)
-#         $progname:    (GNU libtool) 2.4.2 Debian-2.4.2-1
-#         automake:     $automake_version
-#         autoconf:     $autoconf_version
+#       host-triplet:   $host
+#       shell:          $SHELL
+#       compiler:               $LTCC
+#       compiler flags:         $LTCFLAGS
+#       linker:         $LD (gnu? $with_gnu_ld)
+#       $progname:              (GNU libtool) 2.2.6b Debian-2.2.6b-2
+#       automake:               $automake_version
+#       autoconf:               $autoconf_version
 #
 # Report bugs to <bug-libtool@gnu.org>.
-# GNU libtool home page: <http://www.gnu.org/software/libtool/>.
-# General help using GNU software: <http://www.gnu.org/gethelp/>.
 
-PROGRAM=libtool
+PROGRAM=ltmain.sh
 PACKAGE=libtool
-VERSION="2.4.2 Debian-2.4.2-1"
+VERSION="2.2.6b Debian-2.2.6b-2"
 TIMESTAMP=""
-package_revision=1.3337
+package_revision=1.3017
 
 # Be Bourne compatible
 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
@@ -98,15 +91,10 @@ fi
 BIN_SH=xpg4; export BIN_SH # for Tru64
 DUALCASE=1; export DUALCASE # for MKS sh
 
-# A function that is used when there is no print builtin or printf.
-func_fallback_echo ()
-{
-  eval 'cat <<_LTECHO_EOF
-$1
-_LTECHO_EOF'
-}
-
 # NLS nuisances: We save the old values to restore during execute mode.
+# Only set LANG and LC_ALL to C if already set.
+# These must not be set unconditionally because not all systems understand
+# e.g. LANG=C (notably SCO).
 lt_user_locale=
 lt_safe_locale=
 for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
@@ -119,28 +107,24 @@ do
           lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
         fi"
 done
-LC_ALL=C
-LANGUAGE=C
-export LANGUAGE LC_ALL
 
 $lt_unset CDPATH
 
 
-# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
-# is ksh but when the shell is invoked as "sh" and the current value of
-# the _XPG environment variable is not equal to 1 (one), the special
-# positional parameter $0, within a function call, is the name of the
-# function.
-progpath="$0"
 
 
 
 : ${CP="cp -f"}
-test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'}
+: ${ECHO="echo"}
+: ${EGREP="/bin/grep -E"}
+: ${FGREP="/bin/grep -F"}
+: ${GREP="/bin/grep"}
+: ${LN_S="ln -s"}
 : ${MAKE="make"}
 : ${MKDIR="mkdir"}
 : ${MV="mv -f"}
 : ${RM="rm -f"}
+: ${SED="/bin/sed"}
 : ${SHELL="${CONFIG_SHELL-/bin/sh}"}
 : ${Xsed="$SED -e 1s/^X//"}
 
@@ -160,27 +144,6 @@ IFS=" 	$lt_nl"
 dirname="s,/[^/]*$,,"
 basename="s,^.*/,,"
 
-# func_dirname file append nondir_replacement
-# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
-# otherwise set result to NONDIR_REPLACEMENT.
-func_dirname ()
-{
-    func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
-    if test "X$func_dirname_result" = "X${1}"; then
-      func_dirname_result="${3}"
-    else
-      func_dirname_result="$func_dirname_result${2}"
-    fi
-} # func_dirname may be replaced by extended shell implementation
-
-
-# func_basename file
-func_basename ()
-{
-    func_basename_result=`$ECHO "${1}" | $SED "$basename"`
-} # func_basename may be replaced by extended shell implementation
-
-
 # func_dirname_and_basename file append nondir_replacement
 # perform func_basename and func_dirname in a single function
 # call:
@@ -195,183 +158,33 @@ func_basename ()
 # those functions but instead duplicate the functionality here.
 func_dirname_and_basename ()
 {
-    # Extract subdirectory from the argument.
-    func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"`
-    if test "X$func_dirname_result" = "X${1}"; then
-      func_dirname_result="${3}"
-    else
-      func_dirname_result="$func_dirname_result${2}"
-    fi
-    func_basename_result=`$ECHO "${1}" | $SED -e "$basename"`
-} # func_dirname_and_basename may be replaced by extended shell implementation
-
-
-# func_stripname prefix suffix name
-# strip PREFIX and SUFFIX off of NAME.
-# PREFIX and SUFFIX must not contain globbing or regex special
-# characters, hashes, percent signs, but SUFFIX may contain a leading
-# dot (in which case that matches only a dot).
-# func_strip_suffix prefix name
-func_stripname ()
-{
-    case ${2} in
-      .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
-      *)  func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
-    esac
-} # func_stripname may be replaced by extended shell implementation
-
-
-# These SED scripts presuppose an absolute path with a trailing slash.
-pathcar='s,^/\([^/]*\).*$,\1,'
-pathcdr='s,^/[^/]*,,'
-removedotparts=':dotsl
-                s@/\./@/@g
-                t dotsl
-                s,/\.$,/,'
-collapseslashes='s@/\{1,\}@/@g'
-finalslash='s,/*$,/,'
-
-# func_normal_abspath PATH
-# Remove doubled-up and trailing slashes, "." path components,
-# and cancel out any ".." path components in PATH after making
-# it an absolute path.
-#             value returned in "$func_normal_abspath_result"
-func_normal_abspath ()
-{
-  # Start from root dir and reassemble the path.
-  func_normal_abspath_result=
-  func_normal_abspath_tpath=$1
-  func_normal_abspath_altnamespace=
-  case $func_normal_abspath_tpath in
-    "")
-      # Empty path, that just means $cwd.
-      func_stripname '' '/' "`pwd`"
-      func_normal_abspath_result=$func_stripname_result
-      return
-    ;;
-    # The next three entries are used to spot a run of precisely
-    # two leading slashes without using negated character classes;
-    # we take advantage of case's first-match behaviour.
-    ///*)
-      # Unusual form of absolute path, do nothing.
-    ;;
-    //*)
-      # Not necessarily an ordinary path; POSIX reserves leading '//'
-      # and for example Cygwin uses it to access remote file shares
-      # over CIFS/SMB, so we conserve a leading double slash if found.
-      func_normal_abspath_altnamespace=/
-    ;;
-    /*)
-      # Absolute path, do nothing.
-    ;;
-    *)
-      # Relative path, prepend $cwd.
-      func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
-    ;;
-  esac
-  # Cancel out all the simple stuff to save iterations.  We also want
-  # the path to end with a slash for ease of parsing, so make sure
-  # there is one (and only one) here.
-  func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
-        -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"`
-  while :; do
-    # Processed it all yet?
-    if test "$func_normal_abspath_tpath" = / ; then
-      # If we ascended to the root using ".." the result may be empty now.
-      if test -z "$func_normal_abspath_result" ; then
-        func_normal_abspath_result=/
-      fi
-      break
-    fi
-    func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
-        -e "$pathcar"`
-    func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
-        -e "$pathcdr"`
-    # Figure out what to do with it
-    case $func_normal_abspath_tcomponent in
-      "")
-        # Trailing empty path component, ignore it.
-      ;;
-      ..)
-        # Parent dir; strip last assembled component from result.
-        func_dirname "$func_normal_abspath_result"
-        func_normal_abspath_result=$func_dirname_result
-      ;;
-      *)
-        # Actual path component, append it.
-        func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent
-      ;;
-    esac
-  done
-  # Restore leading double-slash if one was found on entry.
-  func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
+  # Extract subdirectory from the argument.
+  func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
+  if test "X$func_dirname_result" = "X${1}"; then
+    func_dirname_result="${3}"
+  else
+    func_dirname_result="$func_dirname_result${2}"
+  fi
+  func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
 }
 
-# func_relative_path SRCDIR DSTDIR
-# generates a relative path from SRCDIR to DSTDIR, with a trailing
-# slash if non-empty, suitable for immediately appending a filename
-# without needing to append a separator.
-#             value returned in "$func_relative_path_result"
-func_relative_path ()
-{
-  func_relative_path_result=
-  func_normal_abspath "$1"
-  func_relative_path_tlibdir=$func_normal_abspath_result
-  func_normal_abspath "$2"
-  func_relative_path_tbindir=$func_normal_abspath_result
-
-  # Ascend the tree starting from libdir
-  while :; do
-    # check if we have found a prefix of bindir
-    case $func_relative_path_tbindir in
-      $func_relative_path_tlibdir)
-        # found an exact match
-        func_relative_path_tcancelled=
-        break
-        ;;
-      $func_relative_path_tlibdir*)
-        # found a matching prefix
-        func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
-        func_relative_path_tcancelled=$func_stripname_result
-        if test -z "$func_relative_path_result"; then
-          func_relative_path_result=.
-        fi
-        break
-        ;;
-      *)
-        func_dirname $func_relative_path_tlibdir
-        func_relative_path_tlibdir=${func_dirname_result}
-        if test "x$func_relative_path_tlibdir" = x ; then
-          # Have to descend all the way to the root!
-          func_relative_path_result=../$func_relative_path_result
-          func_relative_path_tcancelled=$func_relative_path_tbindir
-          break
-        fi
-        func_relative_path_result=../$func_relative_path_result
-        ;;
-    esac
-  done
-
-  # Now calculate path; take care to avoid doubling-up slashes.
-  func_stripname '' '/' "$func_relative_path_result"
-  func_relative_path_result=$func_stripname_result
-  func_stripname '/' '/' "$func_relative_path_tcancelled"
-  if test "x$func_stripname_result" != x ; then
-    func_relative_path_result=${func_relative_path_result}/${func_stripname_result}
-  fi
+# Generated shell functions inserted here.
 
-  # Normalisation. If bindir is libdir, return empty string,
-  # else relative path ending with a slash; either way, target
-  # file name can be directly appended.
-  if test ! -z "$func_relative_path_result"; then
-    func_stripname './' '' "$func_relative_path_result/"
-    func_relative_path_result=$func_stripname_result
-  fi
-}
+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+# is ksh but when the shell is invoked as "sh" and the current value of
+# the _XPG environment variable is not equal to 1 (one), the special
+# positional parameter $0, within a function call, is the name of the
+# function.
+progpath="$0"
 
 # The name of this program:
+# In the unlikely event $progname began with a '-', it would play havoc with
+# func_echo (imagine progname=-n), so we prepend ./ in that case:
 func_dirname_and_basename "$progpath"
 progname=$func_basename_result
+case $progname in
+  -*) progname=./$progname ;;
+esac
 
 # Make sure we have an absolute path for reexecution:
 case $progpath in
@@ -383,7 +196,7 @@ case $progpath in
      ;;
   *)
      save_IFS="$IFS"
-     IFS=${PATH_SEPARATOR-:}
+     IFS=:
      for progdir in $PATH; do
        IFS="$save_IFS"
        test -x "$progdir/$progname" && break
@@ -402,15 +215,6 @@ sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
 # Same as above, but do not quote variable references.
 double_quote_subst='s/\(["`\\]\)/\\\1/g'
 
-# Sed substitution that turns a string into a regex matching for the
-# string literally.
-sed_make_literal_regex='s,[].[^$\\*\/],\\&,g'
-
-# Sed substitution that converts a w32 file name or path
-# which contains forward slashes, into one that contains
-# (escaped) backslashes.  A very naive implementation.
-lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
-
 # Re-`\' parameter expansions in output of double_quote_subst that were
 # `\'-ed in input to the same.  If an odd number of `\' preceded a '$'
 # in input to double_quote_subst, that '$' was protected from expansion.
@@ -439,7 +243,7 @@ opt_warning=:
 # name if it has been set yet.
 func_echo ()
 {
-    $ECHO "$progname: ${opt_mode+$opt_mode: }$*"
+    $ECHO "$progname${mode+: }$mode: $*"
 }
 
 # func_verbose arg...
@@ -454,25 +258,18 @@ func_verbose ()
     :
 }
 
-# func_echo_all arg...
-# Invoke $ECHO with all args, space-separated.
-func_echo_all ()
-{
-    $ECHO "$*"
-}
-
 # func_error arg...
 # Echo program name prefixed message to standard error.
 func_error ()
 {
-    $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2
+    $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2
 }
 
 # func_warning arg...
 # Echo program name prefixed warning message to standard error.
 func_warning ()
 {
-    $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2
+    $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2
 
     # bash bug again:
     :
@@ -529,9 +326,9 @@ func_mkdir_p ()
         case $my_directory_path in */*) ;; *) break ;; esac
 
         # ...otherwise throw away the child directory and loop
-        my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"`
+        my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"`
       done
-      my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'`
+      my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'`
 
       save_mkdir_p_IFS="$IFS"; IFS=':'
       for my_dir in $my_dir_list; do
@@ -581,7 +378,7 @@ func_mktempdir ()
         func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
     fi
 
-    $ECHO "$my_tmpdir"
+    $ECHO "X$my_tmpdir" | $Xsed
 }
 
 
@@ -595,7 +392,7 @@ func_quote_for_eval ()
 {
     case $1 in
       *[\\\`\"\$]*)
-        func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;;
+        func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;;
       *)
         func_quote_for_eval_unquoted_result="$1" ;;
     esac
@@ -622,7 +419,7 @@ func_quote_for_expand ()
 {
     case $1 in
       *[\\\`\"]*)
-        my_arg=`$ECHO "$1" | $SED \
+        my_arg=`$ECHO "X$1" | $Xsed \
             -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
       *)
         my_arg="$1" ;;
@@ -691,39 +488,15 @@ func_show_eval_locale ()
     fi
 }
 
-# func_tr_sh
-# Turn $1 into a string suitable for a shell variable name.
-# Result is stored in $func_tr_sh_result.  All characters
-# not in the set a-zA-Z0-9_ are replaced with '_'. Further,
-# if $1 begins with a digit, a '_' is prepended as well.
-func_tr_sh ()
-{
-  case $1 in
-  [0-9]* | *[!a-zA-Z0-9_]*)
-    func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'`
-    ;;
-  * )
-    func_tr_sh_result=$1
-    ;;
-  esac
-}
+
+
 
 
 # func_version
 # Echo version message to standard output and exit.
 func_version ()
 {
-    $opt_debug
-
-    $SED -n '/(C)/!b go
-        :more
-        /\./!{
-          N
-          s/\n# / /
-          b more
-        }
-        :go
-        /^# '$PROGRAM' (GNU /,/# warranty; / {
+    $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / {
         s/^# //
         s/^# *$//
         s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
@@ -736,28 +509,22 @@ func_version ()
 # Echo short help message to standard output and exit.
 func_usage ()
 {
-    $opt_debug
-
-    $SED -n '/^# Usage:/,/^#  *.*--help/ {
+    $SED -n '/^# Usage:/,/# -h/ {
         s/^# //
         s/^# *$//
         s/\$progname/'$progname'/
         p
     }' < "$progpath"
-    echo
+    $ECHO
     $ECHO "run \`$progname --help | more' for full usage"
     exit $?
 }
 
-# func_help [NOEXIT]
-# Echo long help message to standard output and exit,
-# unless 'noexit' is passed as argument.
+# func_help
+# Echo long help message to standard output and exit.
 func_help ()
 {
-    $opt_debug
-
     $SED -n '/^# Usage:/,/# Report bugs to/ {
-        :print
         s/^# //
         s/^# *$//
         s*\$progname*'$progname'*
@@ -767,18 +534,11 @@ func_help ()
         s*\$LTCFLAGS*'"$LTCFLAGS"'*
         s*\$LD*'"$LD"'*
         s/\$with_gnu_ld/'"$with_gnu_ld"'/
-        s/\$automake_version/'"`(${AUTOMAKE-automake} --version) 2>/dev/null |$SED 1q`"'/
-        s/\$autoconf_version/'"`(${AUTOCONF-autoconf} --version) 2>/dev/null |$SED 1q`"'/
+        s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/
+        s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/
         p
-        d
-     }
-     /^# .* home page:/b print
-     /^# General help using/b print
-     ' < "$progpath"
-    ret=$?
-    if test -z "$1"; then
-      exit $ret
-    fi
+     }' < "$progpath"
+    exit $?
 }
 
 # func_missing_arg argname
@@ -786,106 +546,63 @@ func_help ()
 # exit_cmd.
 func_missing_arg ()
 {
-    $opt_debug
-
-    func_error "missing argument for $1."
+    func_error "missing argument for $1"
     exit_cmd=exit
 }
 
+exit_cmd=:
 
-# func_split_short_opt shortopt
-# Set func_split_short_opt_name and func_split_short_opt_arg shell
-# variables after splitting SHORTOPT after the 2nd character.
-func_split_short_opt ()
-{
-    my_sed_short_opt='1s/^\(..\).*$/\1/;q'
-    my_sed_short_rest='1s/^..\(.*\)$/\1/;q'
-
-    func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"`
-    func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"`
-} # func_split_short_opt may be replaced by extended shell implementation
-
-
-# func_split_long_opt longopt
-# Set func_split_long_opt_name and func_split_long_opt_arg shell
-# variables after splitting LONGOPT at the `=' sign.
-func_split_long_opt ()
-{
-    my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q'
-    my_sed_long_arg='1s/^--[^=]*=//'
-
-    func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"`
-    func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"`
-} # func_split_long_opt may be replaced by extended shell implementation
 
-exit_cmd=:
 
 
 
+# Check that we have a working $ECHO.
+if test "X$1" = X--no-reexec; then
+  # Discard the --no-reexec flag, and continue.
+  shift
+elif test "X$1" = X--fallback-echo; then
+  # Avoid inline document here, it may be left over
+  :
+elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then
+  # Yippee, $ECHO works!
+  :
+else
+  # Restart under the correct shell, and then maybe $ECHO will work.
+  exec $SHELL "$progpath" --no-reexec ${1+"$@"}
+fi
 
+if test "X$1" = X--fallback-echo; then
+  # used as fallback echo
+  shift
+  cat <<EOF
+$*
+EOF
+  exit $EXIT_SUCCESS
+fi
 
 magic="%%%MAGIC variable%%%"
 magic_exe="%%%MAGIC EXE variable%%%"
 
 # Global variables.
+# $mode is unset
 nonopt=
+execute_dlfiles=
 preserve_args=
 lo2o="s/\\.lo\$/.${objext}/"
 o2lo="s/\\.${objext}\$/.lo/"
 extracted_archives=
 extracted_serial=0
 
+opt_dry_run=false
+opt_duplicate_deps=false
+opt_silent=false
+opt_debug=:
+
 # If this variable is set in any of the actions, the command in it
 # will be execed at the end.  This prevents here-documents from being
 # left over by shells.
 exec_cmd=
 
-# func_append var value
-# Append VALUE to the end of shell variable VAR.
-func_append ()
-{
-    eval "${1}=\$${1}\${2}"
-} # func_append may be replaced by extended shell implementation
-
-# func_append_quoted var value
-# Quote VALUE and append to the end of shell variable VAR, separated
-# by a space.
-func_append_quoted ()
-{
-    func_quote_for_eval "${2}"
-    eval "${1}=\$${1}\\ \$func_quote_for_eval_result"
-} # func_append_quoted may be replaced by extended shell implementation
-
-
-# func_arith arithmetic-term...
-func_arith ()
-{
-    func_arith_result=`expr "${@}"`
-} # func_arith may be replaced by extended shell implementation
-
-
-# func_len string
-# STRING may not start with a hyphen.
-func_len ()
-{
-    func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len`
-} # func_len may be replaced by extended shell implementation
-
-
-# func_lo2o object
-func_lo2o ()
-{
-    func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
-} # func_lo2o may be replaced by extended shell implementation
-
-
-# func_xform libobj-or-source
-func_xform ()
-{
-    func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'`
-} # func_xform may be replaced by extended shell implementation
-
-
 # func_fatal_configuration arg...
 # Echo program name prefixed message to standard error, followed by
 # a configuration failure hint, and exit.
@@ -919,16 +636,16 @@ func_config ()
 # Display the features supported by this script.
 func_features ()
 {
-    echo "host: $host"
+    $ECHO "host: $host"
     if test "$build_libtool_libs" = yes; then
-      echo "enable shared libraries"
+      $ECHO "enable shared libraries"
     else
-      echo "disable shared libraries"
+      $ECHO "disable shared libraries"
     fi
     if test "$build_old_libs" = yes; then
-      echo "enable static libraries"
+      $ECHO "enable static libraries"
     else
-      echo "disable static libraries"
+      $ECHO "disable static libraries"
     fi
 
     exit $?
@@ -975,209 +692,117 @@ func_enable_tag ()
   esac
 }
 
-# func_check_version_match
-# Ensure that we are using m4 macros, and libtool script from the same
-# release of libtool.
-func_check_version_match ()
+# Parse options once, thoroughly.  This comes as soon as possible in
+# the script to make things like `libtool --version' happen quickly.
 {
-  if test "$package_revision" != "$macro_revision"; then
-    if test "$VERSION" != "$macro_version"; then
-      if test -z "$macro_version"; then
-        cat >&2 <<_LT_EOF
-$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
-$progname: definition of this LT_INIT comes from an older release.
-$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
-$progname: and run autoconf again.
-_LT_EOF
-      else
-        cat >&2 <<_LT_EOF
-$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
-$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
-$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
-$progname: and run autoconf again.
-_LT_EOF
-      fi
-    else
-      cat >&2 <<_LT_EOF
-$progname: Version mismatch error.  This is $PACKAGE $VERSION, revision $package_revision,
-$progname: but the definition of this LT_INIT comes from revision $macro_revision.
-$progname: You should recreate aclocal.m4 with macros from revision $package_revision
-$progname: of $PACKAGE $VERSION and run autoconf again.
-_LT_EOF
-    fi
-
-    exit $EXIT_MISMATCH
-  fi
-}
-
-
-# Shorthand for --mode=foo, only valid as the first argument
-case $1 in
-clean|clea|cle|cl)
-  shift; set dummy --mode clean ${1+"$@"}; shift
-  ;;
-compile|compil|compi|comp|com|co|c)
-  shift; set dummy --mode compile ${1+"$@"}; shift
-  ;;
-execute|execut|execu|exec|exe|ex|e)
-  shift; set dummy --mode execute ${1+"$@"}; shift
-  ;;
-finish|finis|fini|fin|fi|f)
-  shift; set dummy --mode finish ${1+"$@"}; shift
-  ;;
-install|instal|insta|inst|ins|in|i)
-  shift; set dummy --mode install ${1+"$@"}; shift
-  ;;
-link|lin|li|l)
-  shift; set dummy --mode link ${1+"$@"}; shift
-  ;;
-uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
-  shift; set dummy --mode uninstall ${1+"$@"}; shift
-  ;;
-esac
-
-
-
-# Option defaults:
-opt_debug=:
-opt_dry_run=false
-opt_config=false
-opt_preserve_dup_deps=false
-opt_features=false
-opt_finish=false
-opt_help=false
-opt_help_all=false
-opt_silent=:
-opt_warning=:
-opt_verbose=:
-opt_silent=false
-opt_verbose=false
 
+  # Shorthand for --mode=foo, only valid as the first argument
+  case $1 in
+  clean|clea|cle|cl)
+    shift; set dummy --mode clean ${1+"$@"}; shift
+    ;;
+  compile|compil|compi|comp|com|co|c)
+    shift; set dummy --mode compile ${1+"$@"}; shift
+    ;;
+  execute|execut|execu|exec|exe|ex|e)
+    shift; set dummy --mode execute ${1+"$@"}; shift
+    ;;
+  finish|finis|fini|fin|fi|f)
+    shift; set dummy --mode finish ${1+"$@"}; shift
+    ;;
+  install|instal|insta|inst|ins|in|i)
+    shift; set dummy --mode install ${1+"$@"}; shift
+    ;;
+  link|lin|li|l)
+    shift; set dummy --mode link ${1+"$@"}; shift
+    ;;
+  uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
+    shift; set dummy --mode uninstall ${1+"$@"}; shift
+    ;;
+  esac
 
-# Parse options once, thoroughly.  This comes as soon as possible in the
-# script to make things like `--version' happen as quickly as we can.
-{
-  # this just eases exit handling
-  while test $# -gt 0; do
+  # Parse non-mode specific arguments:
+  while test "$#" -gt 0; do
     opt="$1"
     shift
+
     case $opt in
-      --debug|-x)       opt_debug='set -x'
+      --config)         func_config                                     ;;
+
+      --debug)          preserve_args="$preserve_args $opt"
                         func_echo "enabling shell trace mode"
+                        opt_debug='set -x'
                         $opt_debug
                         ;;
-      --dry-run|--dryrun|-n)
-                        opt_dry_run=:
-                        ;;
-      --config)
-                        opt_config=:
-func_config
-                        ;;
-      --dlopen|-dlopen)
-                        optarg="$1"
-                        opt_dlopen="${opt_dlopen+$opt_dlopen
-}$optarg"
+
+      -dlopen)          test "$#" -eq 0 && func_missing_arg "$opt" && break
+                        execute_dlfiles="$execute_dlfiles $1"
                         shift
                         ;;
-      --preserve-dup-deps)
-                        opt_preserve_dup_deps=:
-                        ;;
-      --features)
-                        opt_features=:
-func_features
-                        ;;
-      --finish)
-                        opt_finish=:
-set dummy --mode finish ${1+"$@"}; shift
-                        ;;
-      --help)
-                        opt_help=:
-                        ;;
-      --help-all)
-                        opt_help_all=:
-opt_help=': help-all'
-                        ;;
-      --mode)
-                        test $# = 0 && func_missing_arg $opt && break
-                        optarg="$1"
-                        opt_mode="$optarg"
-case $optarg in
-  # Valid mode arguments:
-  clean|compile|execute|finish|install|link|relink|uninstall) ;;
-
-  # Catch anything else as an error
-  *) func_error "invalid argument for $opt"
-     exit_cmd=exit
-     break
-     ;;
-esac
+
+      --dry-run | -n)   opt_dry_run=:                                   ;;
+      --features)       func_features                                   ;;
+      --finish)         mode="finish"                                   ;;
+
+      --mode)           test "$#" -eq 0 && func_missing_arg "$opt" && break
+                        case $1 in
+                          # Valid mode arguments:
+                          clean)        ;;
+                          compile)      ;;
+                          execute)      ;;
+                          finish)       ;;
+                          install)      ;;
+                          link)         ;;
+                          relink)       ;;
+                          uninstall)    ;;
+
+                          # Catch anything else as an error
+                          *) func_error "invalid argument for $opt"
+                             exit_cmd=exit
+                             break
+                             ;;
+                        esac
+
+                        mode="$1"
                         shift
                         ;;
-      --no-silent|--no-quiet)
-                        opt_silent=false
-func_append preserve_args " $opt"
-                        ;;
-      --no-warning|--no-warn)
-                        opt_warning=false
-func_append preserve_args " $opt"
-                        ;;
-      --no-verbose)
-                        opt_verbose=false
-func_append preserve_args " $opt"
-                        ;;
-      --silent|--quiet)
+
+      --preserve-dup-deps)
+                        opt_duplicate_deps=:                            ;;
+
+      --quiet|--silent) preserve_args="$preserve_args $opt"
                         opt_silent=:
-func_append preserve_args " $opt"
-        opt_verbose=false
                         ;;
-      --verbose|-v)
-                        opt_verbose=:
-func_append preserve_args " $opt"
-opt_silent=false
+
+      --verbose| -v)    preserve_args="$preserve_args $opt"
+                        opt_silent=false
                         ;;
-      --tag)
-                        test $# = 0 && func_missing_arg $opt && break
-                        optarg="$1"
-                        opt_tag="$optarg"
-func_append preserve_args " $opt $optarg"
-func_enable_tag "$optarg"
+
+      --tag)            test "$#" -eq 0 && func_missing_arg "$opt" && break
+                        preserve_args="$preserve_args $opt $1"
+                        func_enable_tag "$1"    # tagname is set here
                         shift
                         ;;
 
-      -\?|-h)           func_usage                              ;;
-      --help)           func_help                               ;;
-      --version)        func_version                            ;;
-
       # Separate optargs to long options:
-      --*=*)
-                        func_split_long_opt "$opt"
-                        set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"}
+      -dlopen=*|--mode=*|--tag=*)
+                        func_opt_split "$opt"
+                        set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"}
                         shift
                         ;;
 
-      # Separate non-argument short options:
-      -\?*|-h*|-n*|-v*)
-                        func_split_short_opt "$opt"
-                        set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"}
-                        shift
-                        ;;
+      -\?|-h)           func_usage                                      ;;
+      --help)           opt_help=:                                      ;;
+      --version)        func_version                                    ;;
 
-      --)               break                                   ;;
-      -*)               func_fatal_help "unrecognized option \`$opt'" ;;
-      *)                set dummy "$opt" ${1+"$@"};     shift; break  ;;
+      -*)               func_fatal_help "unrecognized option \`$opt'"   ;;
+
+      *)                nonopt="$opt"
+                        break
+                        ;;
     esac
   done
 
-  # Validate options:
-
-  # save first non-option argument
-  if test "$#" -gt 0; then
-    nonopt="$opt"
-    shift
-  fi
-
-  # preserve --debug
-  test "$opt_debug" = : || func_append preserve_args " --debug"
 
   case $host in
     *cygwin* | *mingw* | *pw32* | *cegcc*)
@@ -1185,44 +810,82 @@ func_enable_tag "$optarg"
       opt_duplicate_compiler_generated_deps=:
       ;;
     *)
-      opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
+      opt_duplicate_compiler_generated_deps=$opt_duplicate_deps
       ;;
   esac
 
-  $opt_help || {
-    # Sanity checks first:
-    func_check_version_match
+  # Having warned about all mis-specified options, bail out if
+  # anything was wrong.
+  $exit_cmd $EXIT_FAILURE
+}
 
-    if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
-      func_fatal_configuration "not configured to build any kind of library"
+# func_check_version_match
+# Ensure that we are using m4 macros, and libtool script from the same
+# release of libtool.
+func_check_version_match ()
+{
+  if test "$package_revision" != "$macro_revision"; then
+    if test "$VERSION" != "$macro_version"; then
+      if test -z "$macro_version"; then
+        cat >&2 <<_LT_EOF
+$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from an older release.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+      else
+        cat >&2 <<_LT_EOF
+$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+      fi
+    else
+      cat >&2 <<_LT_EOF
+$progname: Version mismatch error.  This is $PACKAGE $VERSION, revision $package_revision,
+$progname: but the definition of this LT_INIT comes from revision $macro_revision.
+$progname: You should recreate aclocal.m4 with macros from revision $package_revision
+$progname: of $PACKAGE $VERSION and run autoconf again.
+_LT_EOF
     fi
 
-    # Darwin sucks
-    eval std_shrext=\"$shrext_cmds\"
+    exit $EXIT_MISMATCH
+  fi
+}
 
-    # Only execute mode is allowed to have -dlopen flags.
-    if test -n "$opt_dlopen" && test "$opt_mode" != execute; then
-      func_error "unrecognized option \`-dlopen'"
-      $ECHO "$help" 1>&2
-      exit $EXIT_FAILURE
-    fi
 
-    # Change the help message to a mode-specific one.
-    generic_help="$help"
-    help="Try \`$progname --help --mode=$opt_mode' for more information."
-  }
+## ----------- ##
+##    Main.    ##
+## ----------- ##
 
+$opt_help || {
+  # Sanity checks first:
+  func_check_version_match
 
-  # Bail if the options were screwed
-  $exit_cmd $EXIT_FAILURE
-}
+  if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+    func_fatal_configuration "not configured to build any kind of library"
+  fi
 
+  test -z "$mode" && func_fatal_error "error: you must specify a MODE."
 
 
+  # Darwin sucks
+  eval std_shrext=\"$shrext_cmds\"
+
+
+  # Only execute mode is allowed to have -dlopen flags.
+  if test -n "$execute_dlfiles" && test "$mode" != execute; then
+    func_error "unrecognized option \`-dlopen'"
+    $ECHO "$help" 1>&2
+    exit $EXIT_FAILURE
+  fi
+
+  # Change the help message to a mode-specific one.
+  generic_help="$help"
+  help="Try \`$progname --help --mode=$mode' for more information."
+}
 
-## ----------- ##
-##    Main.    ##
-## ----------- ##
 
 # func_lalib_p file
 # True iff FILE is a libtool `.la' library or `.lo' object file.
@@ -1287,9 +950,12 @@ func_ltwrapper_executable_p ()
 # temporary ltwrapper_script.
 func_ltwrapper_scriptname ()
 {
-    func_dirname_and_basename "$1" "" "."
-    func_stripname '' '.exe' "$func_basename_result"
-    func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
+    func_ltwrapper_scriptname_result=""
+    if func_ltwrapper_executable_p "$1"; then
+        func_dirname_and_basename "$1" "" "."
+        func_stripname '' '.exe' "$func_basename_result"
+        func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
+    fi
 }
 
 # func_ltwrapper_p file
@@ -1335,37 +1001,6 @@ func_source ()
 }
 
 
-# func_resolve_sysroot PATH
-# Replace a leading = in PATH with a sysroot.  Store the result into
-# func_resolve_sysroot_result
-func_resolve_sysroot ()
-{
-  func_resolve_sysroot_result=$1
-  case $func_resolve_sysroot_result in
-  =*)
-    func_stripname '=' '' "$func_resolve_sysroot_result"
-    func_resolve_sysroot_result=$lt_sysroot$func_stripname_result
-    ;;
-  esac
-}
-
-# func_replace_sysroot PATH
-# If PATH begins with the sysroot, replace it with = and
-# store the result into func_replace_sysroot_result.
-func_replace_sysroot ()
-{
-  case "$lt_sysroot:$1" in
-  ?*:"$lt_sysroot"*)
-    func_stripname "$lt_sysroot" '' "$1"
-    func_replace_sysroot_result="=$func_stripname_result"
-    ;;
-  *)
-    # Including no sysroot.
-    func_replace_sysroot_result=$1
-    ;;
-  esac
-}
-
 # func_infer_tag arg
 # Infer tagged configuration to use if any are available and
 # if one wasn't chosen via the "--tag" command line option.
@@ -1378,15 +1013,13 @@ func_infer_tag ()
     if test -n "$available_tags" && test -z "$tagname"; then
       CC_quoted=
       for arg in $CC; do
-        func_append_quoted CC_quoted "$arg"
+        func_quote_for_eval "$arg"
+        CC_quoted="$CC_quoted $func_quote_for_eval_result"
       done
-      CC_expanded=`func_echo_all $CC`
-      CC_quoted_expanded=`func_echo_all $CC_quoted`
       case $@ in
       # Blanks in the command may have been stripped by the calling shell,
       # but not from the CC environment variable when configure was run.
-      " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
-      " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;;
+      " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ;;
       # Blanks at the start of $base_compile will cause this to fail
       # if we don't check for them as well.
       *)
@@ -1397,13 +1030,11 @@ func_infer_tag ()
             CC_quoted=
             for arg in $CC; do
               # Double-quote args containing other shell metacharacters.
-              func_append_quoted CC_quoted "$arg"
+              func_quote_for_eval "$arg"
+              CC_quoted="$CC_quoted $func_quote_for_eval_result"
             done
-            CC_expanded=`func_echo_all $CC`
-            CC_quoted_expanded=`func_echo_all $CC_quoted`
             case "$@ " in
-            " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
-            " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*)
+              " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*)
               # The compiler in the base compile command matches
               # the one in the tagged configuration.
               # Assume this is the tagged configuration we want.
@@ -1466,486 +1097,6 @@ EOF
     }
 }
 
-
-##################################################
-# FILE NAME AND PATH CONVERSION HELPER FUNCTIONS #
-##################################################
-
-# func_convert_core_file_wine_to_w32 ARG
-# Helper function used by file name conversion functions when $build is *nix,
-# and $host is mingw, cygwin, or some other w32 environment. Relies on a
-# correctly configured wine environment available, with the winepath program
-# in $build's $PATH.
-#
-# ARG is the $build file name to be converted to w32 format.
-# Result is available in $func_convert_core_file_wine_to_w32_result, and will
-# be empty on error (or when ARG is empty)
-func_convert_core_file_wine_to_w32 ()
-{
-  $opt_debug
-  func_convert_core_file_wine_to_w32_result="$1"
-  if test -n "$1"; then
-    # Unfortunately, winepath does not exit with a non-zero error code, so we
-    # are forced to check the contents of stdout. On the other hand, if the
-    # command is not found, the shell will set an exit code of 127 and print
-    # *an error message* to stdout. So we must check for both error code of
-    # zero AND non-empty stdout, which explains the odd construction:
-    func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null`
-    if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then
-      func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" |
-        $SED -e "$lt_sed_naive_backslashify"`
-    else
-      func_convert_core_file_wine_to_w32_result=
-    fi
-  fi
-}
-# end: func_convert_core_file_wine_to_w32
-
-
-# func_convert_core_path_wine_to_w32 ARG
-# Helper function used by path conversion functions when $build is *nix, and
-# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly
-# configured wine environment available, with the winepath program in $build's
-# $PATH. Assumes ARG has no leading or trailing path separator characters.
-#
-# ARG is path to be converted from $build format to win32.
-# Result is available in $func_convert_core_path_wine_to_w32_result.
-# Unconvertible file (directory) names in ARG are skipped; if no directory names
-# are convertible, then the result may be empty.
-func_convert_core_path_wine_to_w32 ()
-{
-  $opt_debug
-  # unfortunately, winepath doesn't convert paths, only file names
-  func_convert_core_path_wine_to_w32_result=""
-  if test -n "$1"; then
-    oldIFS=$IFS
-    IFS=:
-    for func_convert_core_path_wine_to_w32_f in $1; do
-      IFS=$oldIFS
-      func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f"
-      if test -n "$func_convert_core_file_wine_to_w32_result" ; then
-        if test -z "$func_convert_core_path_wine_to_w32_result"; then
-          func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result"
-        else
-          func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result"
-        fi
-      fi
-    done
-    IFS=$oldIFS
-  fi
-}
-# end: func_convert_core_path_wine_to_w32
-
-
-# func_cygpath ARGS...
-# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when
-# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2)
-# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or
-# (2), returns the Cygwin file name or path in func_cygpath_result (input
-# file name or path is assumed to be in w32 format, as previously converted
-# from $build's *nix or MSYS format). In case (3), returns the w32 file name
-# or path in func_cygpath_result (input file name or path is assumed to be in
-# Cygwin format). Returns an empty string on error.
-#
-# ARGS are passed to cygpath, with the last one being the file name or path to
-# be converted.
-#
-# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH
-# environment variable; do not put it in $PATH.
-func_cygpath ()
-{
-  $opt_debug
-  if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
-    func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
-    if test "$?" -ne 0; then
-      # on failure, ensure result is empty
-      func_cygpath_result=
-    fi
-  else
-    func_cygpath_result=
-    func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'"
-  fi
-}
-#end: func_cygpath
-
-
-# func_convert_core_msys_to_w32 ARG
-# Convert file name or path ARG from MSYS format to w32 format.  Return
-# result in func_convert_core_msys_to_w32_result.
-func_convert_core_msys_to_w32 ()
-{
-  $opt_debug
-  # awkward: cmd appends spaces to result
-  func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null |
-    $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"`
-}
-#end: func_convert_core_msys_to_w32
-
-
-# func_convert_file_check ARG1 ARG2
-# Verify that ARG1 (a file name in $build format) was converted to $host
-# format in ARG2. Otherwise, emit an error message, but continue (resetting
-# func_to_host_file_result to ARG1).
-func_convert_file_check ()
-{
-  $opt_debug
-  if test -z "$2" && test -n "$1" ; then
-    func_error "Could not determine host file name corresponding to"
-    func_error "  \`$1'"
-    func_error "Continuing, but uninstalled executables may not work."
-    # Fallback:
-    func_to_host_file_result="$1"
-  fi
-}
-# end func_convert_file_check
-
-
-# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH
-# Verify that FROM_PATH (a path in $build format) was converted to $host
-# format in TO_PATH. Otherwise, emit an error message, but continue, resetting
-# func_to_host_file_result to a simplistic fallback value (see below).
-func_convert_path_check ()
-{
-  $opt_debug
-  if test -z "$4" && test -n "$3"; then
-    func_error "Could not determine the host path corresponding to"
-    func_error "  \`$3'"
-    func_error "Continuing, but uninstalled executables may not work."
-    # Fallback.  This is a deliberately simplistic "conversion" and
-    # should not be "improved".  See libtool.info.
-    if test "x$1" != "x$2"; then
-      lt_replace_pathsep_chars="s|$1|$2|g"
-      func_to_host_path_result=`echo "$3" |
-        $SED -e "$lt_replace_pathsep_chars"`
-    else
-      func_to_host_path_result="$3"
-    fi
-  fi
-}
-# end func_convert_path_check
-
-
-# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG
-# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT
-# and appending REPL if ORIG matches BACKPAT.
-func_convert_path_front_back_pathsep ()
-{
-  $opt_debug
-  case $4 in
-  $1 ) func_to_host_path_result="$3$func_to_host_path_result"
-    ;;
-  esac
-  case $4 in
-  $2 ) func_append func_to_host_path_result "$3"
-    ;;
-  esac
-}
-# end func_convert_path_front_back_pathsep
-
-
-##################################################
-# $build to $host FILE NAME CONVERSION FUNCTIONS #
-##################################################
-# invoked via `$to_host_file_cmd ARG'
-#
-# In each case, ARG is the path to be converted from $build to $host format.
-# Result will be available in $func_to_host_file_result.
-
-
-# func_to_host_file ARG
-# Converts the file name ARG from $build format to $host format. Return result
-# in func_to_host_file_result.
-func_to_host_file ()
-{
-  $opt_debug
-  $to_host_file_cmd "$1"
-}
-# end func_to_host_file
-
-
-# func_to_tool_file ARG LAZY
-# converts the file name ARG from $build format to toolchain format. Return
-# result in func_to_tool_file_result.  If the conversion in use is listed
-# in (the comma separated) LAZY, no conversion takes place.
-func_to_tool_file ()
-{
-  $opt_debug
-  case ,$2, in
-    *,"$to_tool_file_cmd",*)
-      func_to_tool_file_result=$1
-      ;;
-    *)
-      $to_tool_file_cmd "$1"
-      func_to_tool_file_result=$func_to_host_file_result
-      ;;
-  esac
-}
-# end func_to_tool_file
-
-
-# func_convert_file_noop ARG
-# Copy ARG to func_to_host_file_result.
-func_convert_file_noop ()
-{
-  func_to_host_file_result="$1"
-}
-# end func_convert_file_noop
-
-
-# func_convert_file_msys_to_w32 ARG
-# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic
-# conversion to w32 is not available inside the cwrapper.  Returns result in
-# func_to_host_file_result.
-func_convert_file_msys_to_w32 ()
-{
-  $opt_debug
-  func_to_host_file_result="$1"
-  if test -n "$1"; then
-    func_convert_core_msys_to_w32 "$1"
-    func_to_host_file_result="$func_convert_core_msys_to_w32_result"
-  fi
-  func_convert_file_check "$1" "$func_to_host_file_result"
-}
-# end func_convert_file_msys_to_w32
-
-
-# func_convert_file_cygwin_to_w32 ARG
-# Convert file name ARG from Cygwin to w32 format.  Returns result in
-# func_to_host_file_result.
-func_convert_file_cygwin_to_w32 ()
-{
-  $opt_debug
-  func_to_host_file_result="$1"
-  if test -n "$1"; then
-    # because $build is cygwin, we call "the" cygpath in $PATH; no need to use
-    # LT_CYGPATH in this case.
-    func_to_host_file_result=`cygpath -m "$1"`
-  fi
-  func_convert_file_check "$1" "$func_to_host_file_result"
-}
-# end func_convert_file_cygwin_to_w32
-
-
-# func_convert_file_nix_to_w32 ARG
-# Convert file name ARG from *nix to w32 format.  Requires a wine environment
-# and a working winepath. Returns result in func_to_host_file_result.
-func_convert_file_nix_to_w32 ()
-{
-  $opt_debug
-  func_to_host_file_result="$1"
-  if test -n "$1"; then
-    func_convert_core_file_wine_to_w32 "$1"
-    func_to_host_file_result="$func_convert_core_file_wine_to_w32_result"
-  fi
-  func_convert_file_check "$1" "$func_to_host_file_result"
-}
-# end func_convert_file_nix_to_w32
-
-
-# func_convert_file_msys_to_cygwin ARG
-# Convert file name ARG from MSYS to Cygwin format.  Requires LT_CYGPATH set.
-# Returns result in func_to_host_file_result.
-func_convert_file_msys_to_cygwin ()
-{
-  $opt_debug
-  func_to_host_file_result="$1"
-  if test -n "$1"; then
-    func_convert_core_msys_to_w32 "$1"
-    func_cygpath -u "$func_convert_core_msys_to_w32_result"
-    func_to_host_file_result="$func_cygpath_result"
-  fi
-  func_convert_file_check "$1" "$func_to_host_file_result"
-}
-# end func_convert_file_msys_to_cygwin
-
-
-# func_convert_file_nix_to_cygwin ARG
-# Convert file name ARG from *nix to Cygwin format.  Requires Cygwin installed
-# in a wine environment, working winepath, and LT_CYGPATH set.  Returns result
-# in func_to_host_file_result.
-func_convert_file_nix_to_cygwin ()
-{
-  $opt_debug
-  func_to_host_file_result="$1"
-  if test -n "$1"; then
-    # convert from *nix to w32, then use cygpath to convert from w32 to cygwin.
-    func_convert_core_file_wine_to_w32 "$1"
-    func_cygpath -u "$func_convert_core_file_wine_to_w32_result"
-    func_to_host_file_result="$func_cygpath_result"
-  fi
-  func_convert_file_check "$1" "$func_to_host_file_result"
-}
-# end func_convert_file_nix_to_cygwin
-
-
-#############################################
-# $build to $host PATH CONVERSION FUNCTIONS #
-#############################################
-# invoked via `$to_host_path_cmd ARG'
-#
-# In each case, ARG is the path to be converted from $build to $host format.
-# The result will be available in $func_to_host_path_result.
-#
-# Path separators are also converted from $build format to $host format.  If
-# ARG begins or ends with a path separator character, it is preserved (but
-# converted to $host format) on output.
-#
-# All path conversion functions are named using the following convention:
-#   file name conversion function    : func_convert_file_X_to_Y ()
-#   path conversion function         : func_convert_path_X_to_Y ()
-# where, for any given $build/$host combination the 'X_to_Y' value is the
-# same.  If conversion functions are added for new $build/$host combinations,
-# the two new functions must follow this pattern, or func_init_to_host_path_cmd
-# will break.
-
-
-# func_init_to_host_path_cmd
-# Ensures that function "pointer" variable $to_host_path_cmd is set to the
-# appropriate value, based on the value of $to_host_file_cmd.
-to_host_path_cmd=
-func_init_to_host_path_cmd ()
-{
-  $opt_debug
-  if test -z "$to_host_path_cmd"; then
-    func_stripname 'func_convert_file_' '' "$to_host_file_cmd"
-    to_host_path_cmd="func_convert_path_${func_stripname_result}"
-  fi
-}
-
-
-# func_to_host_path ARG
-# Converts the path ARG from $build format to $host format. Return result
-# in func_to_host_path_result.
-func_to_host_path ()
-{
-  $opt_debug
-  func_init_to_host_path_cmd
-  $to_host_path_cmd "$1"
-}
-# end func_to_host_path
-
-
-# func_convert_path_noop ARG
-# Copy ARG to func_to_host_path_result.
-func_convert_path_noop ()
-{
-  func_to_host_path_result="$1"
-}
-# end func_convert_path_noop
-
-
-# func_convert_path_msys_to_w32 ARG
-# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic
-# conversion to w32 is not available inside the cwrapper.  Returns result in
-# func_to_host_path_result.
-func_convert_path_msys_to_w32 ()
-{
-  $opt_debug
-  func_to_host_path_result="$1"
-  if test -n "$1"; then
-    # Remove leading and trailing path separator characters from ARG.  MSYS
-    # behavior is inconsistent here; cygpath turns them into '.;' and ';.';
-    # and winepath ignores them completely.
-    func_stripname : : "$1"
-    func_to_host_path_tmp1=$func_stripname_result
-    func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
-    func_to_host_path_result="$func_convert_core_msys_to_w32_result"
-    func_convert_path_check : ";" \
-      "$func_to_host_path_tmp1" "$func_to_host_path_result"
-    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
-  fi
-}
-# end func_convert_path_msys_to_w32
-
-
-# func_convert_path_cygwin_to_w32 ARG
-# Convert path ARG from Cygwin to w32 format.  Returns result in
-# func_to_host_file_result.
-func_convert_path_cygwin_to_w32 ()
-{
-  $opt_debug
-  func_to_host_path_result="$1"
-  if test -n "$1"; then
-    # See func_convert_path_msys_to_w32:
-    func_stripname : : "$1"
-    func_to_host_path_tmp1=$func_stripname_result
-    func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"`
-    func_convert_path_check : ";" \
-      "$func_to_host_path_tmp1" "$func_to_host_path_result"
-    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
-  fi
-}
-# end func_convert_path_cygwin_to_w32
-
-
-# func_convert_path_nix_to_w32 ARG
-# Convert path ARG from *nix to w32 format.  Requires a wine environment and
-# a working winepath.  Returns result in func_to_host_file_result.
-func_convert_path_nix_to_w32 ()
-{
-  $opt_debug
-  func_to_host_path_result="$1"
-  if test -n "$1"; then
-    # See func_convert_path_msys_to_w32:
-    func_stripname : : "$1"
-    func_to_host_path_tmp1=$func_stripname_result
-    func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
-    func_to_host_path_result="$func_convert_core_path_wine_to_w32_result"
-    func_convert_path_check : ";" \
-      "$func_to_host_path_tmp1" "$func_to_host_path_result"
-    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
-  fi
-}
-# end func_convert_path_nix_to_w32
-
-
-# func_convert_path_msys_to_cygwin ARG
-# Convert path ARG from MSYS to Cygwin format.  Requires LT_CYGPATH set.
-# Returns result in func_to_host_file_result.
-func_convert_path_msys_to_cygwin ()
-{
-  $opt_debug
-  func_to_host_path_result="$1"
-  if test -n "$1"; then
-    # See func_convert_path_msys_to_w32:
-    func_stripname : : "$1"
-    func_to_host_path_tmp1=$func_stripname_result
-    func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
-    func_cygpath -u -p "$func_convert_core_msys_to_w32_result"
-    func_to_host_path_result="$func_cygpath_result"
-    func_convert_path_check : : \
-      "$func_to_host_path_tmp1" "$func_to_host_path_result"
-    func_convert_path_front_back_pathsep ":*" "*:" : "$1"
-  fi
-}
-# end func_convert_path_msys_to_cygwin
-
-
-# func_convert_path_nix_to_cygwin ARG
-# Convert path ARG from *nix to Cygwin format.  Requires Cygwin installed in a
-# a wine environment, working winepath, and LT_CYGPATH set.  Returns result in
-# func_to_host_file_result.
-func_convert_path_nix_to_cygwin ()
-{
-  $opt_debug
-  func_to_host_path_result="$1"
-  if test -n "$1"; then
-    # Remove leading and trailing path separator characters from
-    # ARG. msys behavior is inconsistent here, cygpath turns them
-    # into '.;' and ';.', and winepath ignores them completely.
-    func_stripname : : "$1"
-    func_to_host_path_tmp1=$func_stripname_result
-    func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
-    func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result"
-    func_to_host_path_result="$func_cygpath_result"
-    func_convert_path_check : : \
-      "$func_to_host_path_tmp1" "$func_to_host_path_result"
-    func_convert_path_front_back_pathsep ":*" "*:" : "$1"
-  fi
-}
-# end func_convert_path_nix_to_cygwin
-
-
 # func_mode_compile arg...
 func_mode_compile ()
 {
@@ -1986,12 +1137,12 @@ func_mode_compile ()
           ;;
 
         -pie | -fpie | -fPIE)
-          func_append pie_flag " $arg"
+          pie_flag="$pie_flag $arg"
           continue
           ;;
 
         -shared | -static | -prefer-pic | -prefer-non-pic)
-          func_append later " $arg"
+          later="$later $arg"
           continue
           ;;
 
@@ -2012,14 +1163,15 @@ func_mode_compile ()
           save_ifs="$IFS"; IFS=','
           for arg in $args; do
             IFS="$save_ifs"
-            func_append_quoted lastarg "$arg"
+            func_quote_for_eval "$arg"
+            lastarg="$lastarg $func_quote_for_eval_result"
           done
           IFS="$save_ifs"
           func_stripname ' ' '' "$lastarg"
           lastarg=$func_stripname_result
 
           # Add the arguments to base_compile.
-          func_append base_compile " $lastarg"
+          base_compile="$base_compile $lastarg"
           continue
           ;;
 
@@ -2035,7 +1187,8 @@ func_mode_compile ()
       esac    #  case $arg_mode
 
       # Aesthetically quote the previous argument.
-      func_append_quoted base_compile "$lastarg"
+      func_quote_for_eval "$lastarg"
+      base_compile="$base_compile $func_quote_for_eval_result"
     done # for arg
 
     case $arg_mode in
@@ -2060,7 +1213,7 @@ func_mode_compile ()
     *.[cCFSifmso] | \
     *.ada | *.adb | *.ads | *.asm | \
     *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
-    *.[fF][09]? | *.for | *.java | *.go | *.obj | *.sx | *.cu | *.cup)
+    *.[fF][09]? | *.for | *.java | *.obj | *.sx)
       func_xform "$libobj"
       libobj=$func_xform_result
       ;;
@@ -2135,7 +1288,7 @@ func_mode_compile ()
     # Calculate the filename of the output object if compiler does
     # not support -o with -c
     if test "$compiler_c_o" = no; then
-      output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext}
+      output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
       lockfile="$output_obj.lock"
     else
       output_obj=
@@ -2166,16 +1319,17 @@ compiler."
         $opt_dry_run || $RM $removelist
         exit $EXIT_FAILURE
       fi
-      func_append removelist " $output_obj"
+      removelist="$removelist $output_obj"
       $ECHO "$srcfile" > "$lockfile"
     fi
 
     $opt_dry_run || $RM $removelist
-    func_append removelist " $lockfile"
+    removelist="$removelist $lockfile"
     trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
 
-    func_to_tool_file "$srcfile" func_convert_file_msys_to_w32
-    srcfile=$func_to_tool_file_result
+    if test -n "$fix_srcfile_path"; then
+      eval srcfile=\"$fix_srcfile_path\"
+    fi
     func_quote_for_eval "$srcfile"
     qsrcfile=$func_quote_for_eval_result
 
@@ -2195,7 +1349,7 @@ compiler."
 
       if test -z "$output_obj"; then
         # Place PIC objects in $objdir
-        func_append command " -o $lobj"
+        command="$command -o $lobj"
       fi
 
       func_show_eval_locale "$command"  \
@@ -2242,11 +1396,11 @@ compiler."
         command="$base_compile $qsrcfile $pic_flag"
       fi
       if test "$compiler_c_o" = yes; then
-        func_append command " -o $obj"
+        command="$command -o $obj"
       fi
 
       # Suppress compiler output if we already did a PIC compilation.
-      func_append command "$suppress_output"
+      command="$command$suppress_output"
       func_show_eval_locale "$command" \
         '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
 
@@ -2291,13 +1445,13 @@ compiler."
 }
 
 $opt_help || {
-  test "$opt_mode" = compile && func_mode_compile ${1+"$@"}
+test "$mode" = compile && func_mode_compile ${1+"$@"}
 }
 
 func_mode_help ()
 {
     # We need to display help for each of the modes.
-    case $opt_mode in
+    case $mode in
       "")
         # Generic help is extracted from the usage comments
         # at the start of this file.
@@ -2328,11 +1482,10 @@ This mode accepts the following additional options:
 
   -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
   -no-suppress      do not suppress compiler output for multiple passes
-  -prefer-pic       try to build PIC objects only
-  -prefer-non-pic   try to build non-PIC objects only
+  -prefer-pic       try to building PIC objects only
+  -prefer-non-pic   try to building non-PIC objects only
   -shared           do not build a \`.o' file suitable for static linking
   -static           only build a \`.o' file suitable for static linking
-  -Wc,FLAG          pass FLAG directly to the compiler
 
 COMPILE-COMMAND is a command to be used in creating a \`standard' object file
 from the given SOURCEFILE.
@@ -2385,7 +1538,7 @@ either the \`install' or \`cp' program.
 
 The following components of INSTALL-COMMAND are treated specially:
 
-  -inst-prefix-dir PREFIX-DIR  Use PREFIX-DIR as a staging area for installation
+  -inst-prefix PREFIX-DIR  Use PREFIX-DIR as a staging area for installation
 
 The rest of the components are interpreted as arguments to that command (only
 BSD-compatible install options are recognized)."
@@ -2405,8 +1558,6 @@ The following components of LINK-COMMAND are treated specially:
 
   -all-static       do not do any dynamic linking at all
   -avoid-version    do not add a version suffix if possible
-  -bindir BINDIR    specify path to binaries directory (for systems where
-                    libraries must be found in the PATH setting at runtime)
   -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
   -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
   -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
@@ -2435,11 +1586,6 @@ The following components of LINK-COMMAND are treated specially:
   -version-info CURRENT[:REVISION[:AGE]]
                     specify library version info [each variable defaults to 0]
   -weak LIBNAME     declare that the target provides the LIBNAME interface
-  -Wc,FLAG
-  -Xcompiler FLAG   pass linker-specific FLAG directly to the compiler
-  -Wl,FLAG
-  -Xlinker FLAG     pass linker-specific FLAG directly to the linker
-  -XCClinker FLAG   pass link-specific FLAG to the compiler driver (CC)
 
 All other options (arguments beginning with \`-') are ignored.
 
@@ -2473,44 +1619,18 @@ Otherwise, only FILE itself is deleted using RM."
         ;;
 
       *)
-        func_fatal_help "invalid operation mode \`$opt_mode'"
+        func_fatal_help "invalid operation mode \`$mode'"
         ;;
     esac
 
-    echo
+    $ECHO
     $ECHO "Try \`$progname --help' for more information about other modes."
+
+    exit $?
 }
 
-# Now that we've collected a possible --mode arg, show help if necessary
-if $opt_help; then
-  if test "$opt_help" = :; then
-    func_mode_help
-  else
-    {
-      func_help noexit
-      for opt_mode in compile link execute install finish uninstall clean; do
-        func_mode_help
-      done
-    } | sed -n '1p; 2,$s/^Usage:/  or: /p'
-    {
-      func_help noexit
-      for opt_mode in compile link execute install finish uninstall clean; do
-        echo
-        func_mode_help
-      done
-    } |
-    sed '1d
-      /^When reporting/,/^Report/{
-        H
-        d
-      }
-      $x
-      /information about other modes/d
-      /more detailed .*MODE/d
-      s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/'
-  fi
-  exit $?
-fi
+  # Now that we've collected a possible --mode arg, show help if necessary
+  $opt_help && func_mode_help
 
 
 # func_mode_execute arg...
@@ -2523,16 +1643,13 @@ func_mode_execute ()
       func_fatal_help "you must specify a COMMAND"
 
     # Handle -dlopen flags immediately.
-    for file in $opt_dlopen; do
+    for file in $execute_dlfiles; do
       test -f "$file" \
         || func_fatal_help "\`$file' is not a file"
 
       dir=
       case $file in
       *.la)
-        func_resolve_sysroot "$file"
-        file=$func_resolve_sysroot_result
-
         # Check to see that this really is a libtool archive.
         func_lalib_unsafe_p "$file" \
           || func_fatal_help "\`$lib' is not a valid libtool archive"
@@ -2554,7 +1671,7 @@ func_mode_execute ()
         dir="$func_dirname_result"
 
         if test -f "$dir/$objdir/$dlname"; then
-          func_append dir "/$objdir"
+          dir="$dir/$objdir"
         else
           if test ! -f "$dir/$dlname"; then
             func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
@@ -2595,7 +1712,7 @@ func_mode_execute ()
     for file
     do
       case $file in
-      -* | *.la | *.lo ) ;;
+      -*) ;;
       *)
         # Do a test to see if this is really a libtool program.
         if func_ltwrapper_script_p "$file"; then
@@ -2611,7 +1728,8 @@ func_mode_execute ()
         ;;
       esac
       # Quote arguments (to preserve shell metacharacters).
-      func_append_quoted args "$file"
+      func_quote_for_eval "$file"
+      args="$args $func_quote_for_eval_result"
     done
 
     if test "X$opt_dry_run" = Xfalse; then
@@ -2636,66 +1754,29 @@ func_mode_execute ()
       # Display what would be done.
       if test -n "$shlibpath_var"; then
         eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
-        echo "export $shlibpath_var"
+        $ECHO "export $shlibpath_var"
       fi
       $ECHO "$cmd$args"
       exit $EXIT_SUCCESS
     fi
 }
 
-test "$opt_mode" = execute && func_mode_execute ${1+"$@"}
+test "$mode" = execute && func_mode_execute ${1+"$@"}
 
 
 # func_mode_finish arg...
 func_mode_finish ()
 {
     $opt_debug
-    libs=
-    libdirs=
+    libdirs="$nonopt"
     admincmds=
 
-    for opt in "$nonopt" ${1+"$@"}
-    do
-      if test -d "$opt"; then
-        func_append libdirs " $opt"
-
-      elif test -f "$opt"; then
-        if func_lalib_unsafe_p "$opt"; then
-          func_append libs " $opt"
-        else
-          func_warning "\`$opt' is not a valid libtool archive"
-        fi
-
-      else
-        func_fatal_error "invalid argument \`$opt'"
-      fi
-    done
-
-    if test -n "$libs"; then
-      if test -n "$lt_sysroot"; then
-        sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"`
-        sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;"
-      else
-        sysroot_cmd=
-      fi
-
-      # Remove sysroot references
-      if $opt_dry_run; then
-        for lib in $libs; do
-          echo "removing references to $lt_sysroot and \`=' prefixes from $lib"
-        done
-      else
-        tmpdir=`func_mktempdir`
-        for lib in $libs; do
-          sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
-            > $tmpdir/tmp-la
-          mv -f $tmpdir/tmp-la $lib
-        done
-        ${RM}r "$tmpdir"
-      fi
-    fi
-
     if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+      for dir
+      do
+        libdirs="$libdirs $dir"
+      done
+
       for libdir in $libdirs; do
         if test -n "$finish_cmds"; then
           # Do each command in the finish commands.
@@ -2705,7 +1786,7 @@ func_mode_finish ()
         if test -n "$finish_eval"; then
           # Do the single finish_eval.
           eval cmds=\"$finish_eval\"
-          $opt_dry_run || eval "$cmds" || func_append admincmds "
+          $opt_dry_run || eval "$cmds" || admincmds="$admincmds
        $cmds"
         fi
       done
@@ -2714,55 +1795,53 @@ func_mode_finish ()
     # Exit here if they wanted silent mode.
     $opt_silent && exit $EXIT_SUCCESS
 
-    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
-      echo "----------------------------------------------------------------------"
-      echo "Libraries have been installed in:"
-      for libdir in $libdirs; do
-        $ECHO "   $libdir"
-      done
-      echo
-      echo "If you ever happen to want to link against installed libraries"
-      echo "in a given directory, LIBDIR, you must either use libtool, and"
-      echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
-      echo "flag during linking and do at least one of the following:"
-      if test -n "$shlibpath_var"; then
-        echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
-        echo "     during execution"
-      fi
-      if test -n "$runpath_var"; then
-        echo "   - add LIBDIR to the \`$runpath_var' environment variable"
-        echo "     during linking"
-      fi
-      if test -n "$hardcode_libdir_flag_spec"; then
-        libdir=LIBDIR
-        eval flag=\"$hardcode_libdir_flag_spec\"
-
-        $ECHO "   - use the \`$flag' linker flag"
-      fi
-      if test -n "$admincmds"; then
-        $ECHO "   - have your system administrator run these commands:$admincmds"
-      fi
-      if test -f /etc/ld.so.conf; then
-        echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
-      fi
-      echo
+    $ECHO "X----------------------------------------------------------------------" | $Xsed
+    $ECHO "Libraries have been installed in:"
+    for libdir in $libdirs; do
+      $ECHO "   $libdir"
+    done
+    $ECHO
+    $ECHO "If you ever happen to want to link against installed libraries"
+    $ECHO "in a given directory, LIBDIR, you must either use libtool, and"
+    $ECHO "specify the full pathname of the library, or use the \`-LLIBDIR'"
+    $ECHO "flag during linking and do at least one of the following:"
+    if test -n "$shlibpath_var"; then
+      $ECHO "   - add LIBDIR to the \`$shlibpath_var' environment variable"
+      $ECHO "     during execution"
+    fi
+    if test -n "$runpath_var"; then
+      $ECHO "   - add LIBDIR to the \`$runpath_var' environment variable"
+      $ECHO "     during linking"
+    fi
+    if test -n "$hardcode_libdir_flag_spec"; then
+      libdir=LIBDIR
+      eval flag=\"$hardcode_libdir_flag_spec\"
 
-      echo "See any operating system documentation about shared libraries for"
-      case $host in
-        solaris2.[6789]|solaris2.1[0-9])
-          echo "more information, such as the ld(1), crle(1) and ld.so(8) manual"
-          echo "pages."
-          ;;
-        *)
-          echo "more information, such as the ld(1) and ld.so(8) manual pages."
-          ;;
-      esac
-      echo "----------------------------------------------------------------------"
+      $ECHO "   - use the \`$flag' linker flag"
+    fi
+    if test -n "$admincmds"; then
+      $ECHO "   - have your system administrator run these commands:$admincmds"
     fi
+    if test -f /etc/ld.so.conf; then
+      $ECHO "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+    fi
+    $ECHO
+
+    $ECHO "See any operating system documentation about shared libraries for"
+    case $host in
+      solaris2.[6789]|solaris2.1[0-9])
+        $ECHO "more information, such as the ld(1), crle(1) and ld.so(8) manual"
+        $ECHO "pages."
+        ;;
+      *)
+        $ECHO "more information, such as the ld(1) and ld.so(8) manual pages."
+        ;;
+    esac
+    $ECHO "X----------------------------------------------------------------------" | $Xsed
     exit $EXIT_SUCCESS
 }
 
-test "$opt_mode" = finish && func_mode_finish ${1+"$@"}
+test "$mode" = finish && func_mode_finish ${1+"$@"}
 
 
 # func_mode_install arg...
@@ -2773,7 +1852,7 @@ func_mode_install ()
     # install_prog (especially on Windows NT).
     if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
        # Allow the use of GNU shtool's install command.
-       case $nonopt in *shtool*) :;; *) false;; esac; then
+       $ECHO "X$nonopt" | $GREP shtool >/dev/null; then
       # Aesthetically quote it.
       func_quote_for_eval "$nonopt"
       install_prog="$func_quote_for_eval_result "
@@ -2787,12 +1866,7 @@ func_mode_install ()
     # The real first argument should be the name of the installation program.
     # Aesthetically quote it.
     func_quote_for_eval "$arg"
-    func_append install_prog "$func_quote_for_eval_result"
-    install_shared_prog=$install_prog
-    case " $install_prog " in
-      *[\\\ /]cp\ *) install_cp=: ;;
-      *) install_cp=false ;;
-    esac
+    install_prog="$install_prog$func_quote_for_eval_result"
 
     # We need to accept at least all the BSD install flags.
     dest=
@@ -2802,12 +1876,10 @@ func_mode_install ()
     install_type=
     isdir=no
     stripme=
-    no_mode=:
     for arg
     do
-      arg2=
       if test -n "$dest"; then
-        func_append files " $dest"
+        files="$files $dest"
         dest=$arg
         continue
       fi
@@ -2815,9 +1887,10 @@ func_mode_install ()
       case $arg in
       -d) isdir=yes ;;
       -f)
-        if $install_cp; then :; else
-          prev=$arg
-        fi
+        case " $install_prog " in
+        *[\\\ /]cp\ *) ;;
+        *) prev=$arg ;;
+        esac
         ;;
       -g | -m | -o)
         prev=$arg
@@ -2831,10 +1904,6 @@ func_mode_install ()
       *)
         # If the previous option needed an argument, then skip it.
         if test -n "$prev"; then
-          if test "x$prev" = x-m && test -n "$install_override_mode"; then
-            arg2=$install_override_mode
-            no_mode=false
-          fi
           prev=
         else
           dest=$arg
@@ -2845,11 +1914,7 @@ func_mode_install ()
 
       # Aesthetically quote the argument.
       func_quote_for_eval "$arg"
-      func_append install_prog " $func_quote_for_eval_result"
-      if test -n "$arg2"; then
-        func_quote_for_eval "$arg2"
-      fi
-      func_append install_shared_prog " $func_quote_for_eval_result"
+      install_prog="$install_prog $func_quote_for_eval_result"
     done
 
     test -z "$install_prog" && \
@@ -2858,13 +1923,6 @@ func_mode_install ()
     test -n "$prev" && \
       func_fatal_help "the \`$prev' option requires an argument"
 
-    if test -n "$install_override_mode" && $no_mode; then
-      if $install_cp; then :; else
-        func_quote_for_eval "$install_override_mode"
-        func_append install_shared_prog " -m $func_quote_for_eval_result"
-      fi
-    fi
-
     if test -z "$files"; then
       if test -z "$dest"; then
         func_fatal_help "no file or destination specified"
@@ -2919,13 +1977,10 @@ func_mode_install ()
       case $file in
       *.$libext)
         # Do the static libraries later.
-        func_append staticlibs " $file"
+        staticlibs="$staticlibs $file"
         ;;
 
       *.la)
-        func_resolve_sysroot "$file"
-        file=$func_resolve_sysroot_result
-
         # Check to see that this really is a libtool archive.
         func_lalib_unsafe_p "$file" \
           || func_fatal_help "\`$file' is not a valid libtool archive"
@@ -2939,23 +1994,23 @@ func_mode_install ()
         if test "X$destdir" = "X$libdir"; then
           case "$current_libdirs " in
           *" $libdir "*) ;;
-          *) func_append current_libdirs " $libdir" ;;
+          *) current_libdirs="$current_libdirs $libdir" ;;
           esac
         else
           # Note the libdir as a future libdir.
           case "$future_libdirs " in
           *" $libdir "*) ;;
-          *) func_append future_libdirs " $libdir" ;;
+          *) future_libdirs="$future_libdirs $libdir" ;;
           esac
         fi
 
         func_dirname "$file" "/" ""
         dir="$func_dirname_result"
-        func_append dir "$objdir"
+        dir="$dir$objdir"
 
         if test -n "$relink_command"; then
           # Determine the prefix the user has applied to our future dir.
-          inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"`
+          inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"`
 
           # Don't allow the user to place us outside of our expected
           # location b/c this prevents finding dependent libraries that
@@ -2968,9 +2023,9 @@ func_mode_install ()
 
           if test -n "$inst_prefix_dir"; then
             # Stick the inst_prefix_dir data into the link command.
-            relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
+            relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
           else
-            relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
+            relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"`
           fi
 
           func_warning "relinking \`$file'"
@@ -2988,7 +2043,7 @@ func_mode_install ()
           test -n "$relink_command" && srcname="$realname"T
 
           # Install the shared library and build the symlinks.
-          func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \
+          func_show_eval "$install_prog $dir/$srcname $destdir/$realname" \
               'exit $?'
           tstripme="$stripme"
           case $host_os in
@@ -3028,7 +2083,7 @@ func_mode_install ()
         func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
 
         # Maybe install the static library, too.
-        test -n "$old_library" && func_append staticlibs " $dir/$old_library"
+        test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
         ;;
 
       *.lo)
@@ -3128,7 +2183,7 @@ func_mode_install ()
             if test -f "$lib"; then
               func_source "$lib"
             fi
-            libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test
+            libfile="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
             if test -n "$libdir" && test ! -f "$libfile"; then
               func_warning "\`$lib' has not been installed in \`$libdir'"
               finalize=no
@@ -3147,7 +2202,7 @@ func_mode_install ()
                 file="$func_basename_result"
                 outputname="$tmpdir/$file"
                 # Replace the output file specification.
-                relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'`
+                relink_command=`$ECHO "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
 
                 $opt_silent || {
                   func_quote_for_expand "$relink_command"
@@ -3166,7 +2221,7 @@ func_mode_install ()
             }
           else
             # Install the binary that we compiled earlier.
-            file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"`
+            file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
           fi
         fi
 
@@ -3202,13 +2257,11 @@ func_mode_install ()
 
       # Set up the ranlib parameters.
       oldlib="$destdir/$name"
-      func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
-      tool_oldlib=$func_to_tool_file_result
 
       func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
 
       if test -n "$stripme" && test -n "$old_striplib"; then
-        func_show_eval "$old_striplib $tool_oldlib" 'exit $?'
+        func_show_eval "$old_striplib $oldlib" 'exit $?'
       fi
 
       # Do each command in the postinstall commands.
@@ -3227,7 +2280,7 @@ func_mode_install ()
     fi
 }
 
-test "$opt_mode" = install && func_mode_install ${1+"$@"}
+test "$mode" = install && func_mode_install ${1+"$@"}
 
 
 # func_generate_dlsyms outputname originator pic_p
@@ -3270,22 +2323,6 @@ func_generate_dlsyms ()
 extern \"C\" {
 #endif
 
-#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
-#pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
-#endif
-
-/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
-#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
-/* DATA imports from DLLs on WIN32 con't be const, because runtime
-   relocations are performed -- see ld's documentation on pseudo-relocs.  */
-# define LT_DLSYM_CONST
-#elif defined(__osf__)
-/* This system does not cope well with relocations in const data.  */
-# define LT_DLSYM_CONST
-#else
-# define LT_DLSYM_CONST const
-#endif
-
 /* External symbol declarations for the compiler. */\
 "
 
@@ -3295,11 +2332,10 @@ extern \"C\" {
           $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
 
           # Add our own program objects to the symbol list.
-          progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`
+          progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
           for progfile in $progfiles; do
-            func_to_tool_file "$progfile" func_convert_file_msys_to_w32
-            func_verbose "extracting global C symbols from \`$func_to_tool_file_result'"
-            $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'"
+            func_verbose "extracting global C symbols from \`$progfile'"
+            $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'"
           done
 
           if test -n "$exclude_expsyms"; then
@@ -3335,7 +2371,7 @@ extern \"C\" {
               eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
               eval '$MV "$nlist"T "$nlist"'
               case $host in
-                *cygwin* | *mingw* | *cegcc* )
+                *cygwin | *mingw* | *cegcc* )
                   eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
                   eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
                   ;;
@@ -3348,52 +2384,10 @@ extern \"C\" {
           func_verbose "extracting global C symbols from \`$dlprefile'"
           func_basename "$dlprefile"
           name="$func_basename_result"
-          case $host in
-            *cygwin* | *mingw* | *cegcc* )
-              # if an import library, we need to obtain dlname
-              if func_win32_import_lib_p "$dlprefile"; then
-                func_tr_sh "$dlprefile"
-                eval "curr_lafile=\$libfile_$func_tr_sh_result"
-                dlprefile_dlbasename=""
-                if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then
-                  # Use subshell, to avoid clobbering current variable values
-                  dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"`
-                  if test -n "$dlprefile_dlname" ; then
-                    func_basename "$dlprefile_dlname"
-                    dlprefile_dlbasename="$func_basename_result"
-                  else
-                    # no lafile. user explicitly requested -dlpreopen <import library>.
-                    $sharedlib_from_linklib_cmd "$dlprefile"
-                    dlprefile_dlbasename=$sharedlib_from_linklib_result
-                  fi
-                fi
-                $opt_dry_run || {
-                  if test -n "$dlprefile_dlbasename" ; then
-                    eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"'
-                  else
-                    func_warning "Could not compute DLL name from $name"
-                    eval '$ECHO ": $name " >> "$nlist"'
-                  fi
-                  func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
-                  eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe |
-                    $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'"
-                }
-              else # not an import lib
-                $opt_dry_run || {
-                  eval '$ECHO ": $name " >> "$nlist"'
-                  func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
-                  eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
-                }
-              fi
-            ;;
-            *)
-              $opt_dry_run || {
-                eval '$ECHO ": $name " >> "$nlist"'
-                func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
-                eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
-              }
-            ;;
-          esac
+          $opt_dry_run || {
+            eval '$ECHO ": $name " >> "$nlist"'
+            eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+          }
         done
 
         $opt_dry_run || {
@@ -3421,19 +2415,36 @@ extern \"C\" {
           if test -f "$nlist"S; then
             eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
           else
-            echo '/* NONE */' >> "$output_objdir/$my_dlsyms"
+            $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms"
           fi
 
-          echo >> "$output_objdir/$my_dlsyms" "\
+          $ECHO >> "$output_objdir/$my_dlsyms" "\
 
 /* The mapping between symbol names and symbols.  */
 typedef struct {
   const char *name;
   void *address;
 } lt_dlsymlist;
-extern LT_DLSYM_CONST lt_dlsymlist
+"
+          case $host in
+          *cygwin* | *mingw* | *cegcc* )
+            $ECHO >> "$output_objdir/$my_dlsyms" "\
+/* DATA imports from DLLs on WIN32 con't be const, because
+   runtime relocations are performed -- see ld's documentation
+   on pseudo-relocs.  */"
+            lt_dlsym_const= ;;
+          *osf5*)
+            echo >> "$output_objdir/$my_dlsyms" "\
+/* This system does not cope well with relocations in const data */"
+            lt_dlsym_const= ;;
+          *)
+            lt_dlsym_const=const ;;
+          esac
+
+          $ECHO >> "$output_objdir/$my_dlsyms" "\
+extern $lt_dlsym_const lt_dlsymlist
 lt_${my_prefix}_LTX_preloaded_symbols[];
-LT_DLSYM_CONST lt_dlsymlist
+$lt_dlsym_const lt_dlsymlist
 lt_${my_prefix}_LTX_preloaded_symbols[] =
 {\
   { \"$my_originator\", (void *) 0 },"
@@ -3446,7 +2457,7 @@ lt_${my_prefix}_LTX_preloaded_symbols[] =
             eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
             ;;
           esac
-          echo >> "$output_objdir/$my_dlsyms" "\
+          $ECHO >> "$output_objdir/$my_dlsyms" "\
   {0, (void *) 0}
 };
 
@@ -3473,7 +2484,7 @@ static const void *lt_preloaded_setup() {
           # linked before any other PIC object.  But we must not use
           # pic_flag when linking with -static.  The problem exists in
           # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
-          *-*-freebsd2.*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
+          *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
             pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
           *-*-hpux*)
             pic_flag_for_symtable=" $pic_flag"  ;;
@@ -3489,7 +2500,7 @@ static const void *lt_preloaded_setup() {
         for arg in $LTCFLAGS; do
           case $arg in
           -pie | -fpie | -fPIE) ;;
-          *) func_append symtab_cflags " $arg" ;;
+          *) symtab_cflags="$symtab_cflags $arg" ;;
           esac
         done
 
@@ -3504,16 +2515,16 @@ static const void *lt_preloaded_setup() {
         case $host in
         *cygwin* | *mingw* | *cegcc* )
           if test -f "$output_objdir/$my_outputname.def"; then
-            compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
-            finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+            compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+            finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
           else
-            compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
-            finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+            compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+            finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
           fi
           ;;
         *)
-          compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
-          finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+          compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+          finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
           ;;
         esac
         ;;
@@ -3527,8 +2538,8 @@ static const void *lt_preloaded_setup() {
       # really was required.
 
       # Nullify the symbol file.
-      compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"`
-      finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"`
+      compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
+      finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
     fi
 }
 
@@ -3538,7 +2549,6 @@ static const void *lt_preloaded_setup() {
 # Need a lot of goo to handle *both* DLLs and import libs
 # Has to be a shell function in order to 'eat' the argument
 # that is supplied when $file_magic_command is called.
-# Despite the name, also deal with 64 bit binaries.
 func_win32_libid ()
 {
   $opt_debug
@@ -3549,11 +2559,9 @@ func_win32_libid ()
     win32_libid_type="x86 archive import"
     ;;
   *ar\ archive*) # could be an import, or static
-    # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.
     if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
-       $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
-      func_to_tool_file "$1" func_convert_file_msys_to_w32
-      win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
+       $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
+      win32_nmres=`eval $NM -f posix -A $1 |
         $SED -n -e '
             1,100{
                 / I /{
@@ -3582,131 +2590,6 @@ func_win32_libid ()
   $ECHO "$win32_libid_type"
 }
 
-# func_cygming_dll_for_implib ARG
-#
-# Platform-specific function to extract the
-# name of the DLL associated with the specified
-# import library ARG.
-# Invoked by eval'ing the libtool variable
-#    $sharedlib_from_linklib_cmd
-# Result is available in the variable
-#    $sharedlib_from_linklib_result
-func_cygming_dll_for_implib ()
-{
-  $opt_debug
-  sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"`
-}
-
-# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs
-#
-# The is the core of a fallback implementation of a
-# platform-specific function to extract the name of the
-# DLL associated with the specified import library LIBNAME.
-#
-# SECTION_NAME is either .idata$6 or .idata$7, depending
-# on the platform and compiler that created the implib.
-#
-# Echos the name of the DLL associated with the
-# specified import library.
-func_cygming_dll_for_implib_fallback_core ()
-{
-  $opt_debug
-  match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"`
-  $OBJDUMP -s --section "$1" "$2" 2>/dev/null |
-    $SED '/^Contents of section '"$match_literal"':/{
-      # Place marker at beginning of archive member dllname section
-      s/.*/====MARK====/
-      p
-      d
-    }
-    # These lines can sometimes be longer than 43 characters, but
-    # are always uninteresting
-    /:[  ]*file format pe[i]\{,1\}-/d
-    /^In archive [^:]*:/d
-    # Ensure marker is printed
-    /^====MARK====/p
-    # Remove all lines with less than 43 characters
-    /^.\{43\}/!d
-    # From remaining lines, remove first 43 characters
-    s/^.\{43\}//' |
-    $SED -n '
-      # Join marker and all lines until next marker into a single line
-      /^====MARK====/ b para
-      H
-      $ b para
-      b
-      :para
-      x
-      s/\n//g
-      # Remove the marker
-      s/^====MARK====//
-      # Remove trailing dots and whitespace
-      s/[\. \t]*$//
-      # Print
-      /./p' |
-    # we now have a list, one entry per line, of the stringified
-    # contents of the appropriate section of all members of the
-    # archive which possess that section. Heuristic: eliminate
-    # all those which have a first or second character that is
-    # a '.' (that is, objdump's representation of an unprintable
-    # character.) This should work for all archives with less than
-    # 0x302f exports -- but will fail for DLLs whose name actually
-    # begins with a literal '.' or a single character followed by
-    # a '.'.
-    #
-    # Of those that remain, print the first one.
-    $SED -e '/^\./d;/^.\./d;q'
-}
-
-# func_cygming_gnu_implib_p ARG
-# This predicate returns with zero status (TRUE) if
-# ARG is a GNU/binutils-style import library. Returns
-# with nonzero status (FALSE) otherwise.
-func_cygming_gnu_implib_p ()
-{
-  $opt_debug
-  func_to_tool_file "$1" func_convert_file_msys_to_w32
-  func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
-  test -n "$func_cygming_gnu_implib_tmp"
-}
-
-# func_cygming_ms_implib_p ARG
-# This predicate returns with zero status (TRUE) if
-# ARG is an MS-style import library. Returns
-# with nonzero status (FALSE) otherwise.
-func_cygming_ms_implib_p ()
-{
-  $opt_debug
-  func_to_tool_file "$1" func_convert_file_msys_to_w32
-  func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
-  test -n "$func_cygming_ms_implib_tmp"
-}
-
-# func_cygming_dll_for_implib_fallback ARG
-# Platform-specific function to extract the
-# name of the DLL associated with the specified
-# import library ARG.
-#
-# This fallback implementation is for use when $DLLTOOL
-# does not support the --identify-strict option.
-# Invoked by eval'ing the libtool variable
-#    $sharedlib_from_linklib_cmd
-# Result is available in the variable
-#    $sharedlib_from_linklib_result
-func_cygming_dll_for_implib_fallback ()
-{
-  $opt_debug
-  if func_cygming_gnu_implib_p "$1" ; then
-    # binutils import library
-    sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"`
-  elif func_cygming_ms_implib_p "$1" ; then
-    # ms-generated import library
-    sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"`
-  else
-    # unknown
-    sharedlib_from_linklib_result=""
-  fi
-}
 
 
 # func_extract_an_archive dir oldlib
@@ -3715,18 +2598,7 @@ func_extract_an_archive ()
     $opt_debug
     f_ex_an_ar_dir="$1"; shift
     f_ex_an_ar_oldlib="$1"
-    if test "$lock_old_archive_extraction" = yes; then
-      lockfile=$f_ex_an_ar_oldlib.lock
-      until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
-        func_echo "Waiting for $lockfile to be removed"
-        sleep 2
-      done
-    fi
-    func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \
-                   'stat=$?; rm -f "$lockfile"; exit $stat'
-    if test "$lock_old_archive_extraction" = yes; then
-      $opt_dry_run || rm -f "$lockfile"
-    fi
+    func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?'
     if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
      :
     else
@@ -3797,7 +2669,7 @@ func_extract_archives ()
             darwin_file=
             darwin_files=
             for darwin_file in $darwin_filelist; do
-              darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP`
+              darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
               $LIPO -create -output "$darwin_file" $darwin_files
             done # $darwin_filelist
             $RM -rf unfat-$$
@@ -3812,30 +2684,25 @@ func_extract_archives ()
         func_extract_an_archive "$my_xdir" "$my_xabs"
         ;;
       esac
-      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP`
+      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
     done
 
     func_extract_archives_result="$my_oldobjs"
 }
 
 
-# func_emit_wrapper [arg=no]
-#
-# Emit a libtool wrapper script on stdout.
-# Don't directly open a file because we may want to
-# incorporate the script contents within a cygwin/mingw
-# wrapper executable.  Must ONLY be called from within
-# func_mode_link because it depends on a number of variables
-# set therein.
+
+# func_emit_wrapper_part1 [arg=no]
 #
-# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
-# variable will take.  If 'yes', then the emitted script
-# will assume that the directory in which it is stored is
-# the $objdir directory.  This is a cygwin/mingw-specific
-# behavior.
-func_emit_wrapper ()
+# Emit the first part of a libtool wrapper script on stdout.
+# For more information, see the description associated with
+# func_emit_wrapper(), below.
+func_emit_wrapper_part1 ()
 {
-        func_emit_wrapper_arg1=${1-no}
+        func_emit_wrapper_part1_arg1=no
+        if test -n "$1" ; then
+          func_emit_wrapper_part1_arg1=$1
+        fi
 
         $ECHO "\
 #! $SHELL
@@ -3851,6 +2718,7 @@ func_emit_wrapper ()
 
 # Sed substitution that helps us do robust quoting.  It backslashifies
 # metacharacters that are still active within double-quoted strings.
+Xsed='${SED} -e 1s/^X//'
 sed_quote_subst='$sed_quote_subst'
 
 # Be Bourne compatible
@@ -3881,135 +2749,31 @@ if test \"\$libtool_install_magic\" = \"$magic\"; then
 else
   # When we are sourced in execute mode, \$file and \$ECHO are already set.
   if test \"\$libtool_execute_magic\" != \"$magic\"; then
-    file=\"\$0\""
-
-    qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"`
-    $ECHO "\
-
-# A function that is used when there is no print builtin or printf.
-func_fallback_echo ()
-{
-  eval 'cat <<_LTECHO_EOF
-\$1
-_LTECHO_EOF'
-}
-    ECHO=\"$qECHO\"
-  fi
-
-# Very basic option parsing. These options are (a) specific to
-# the libtool wrapper, (b) are identical between the wrapper
-# /script/ and the wrapper /executable/ which is used only on
-# windows platforms, and (c) all begin with the string "--lt-"
-# (application programs are unlikely to have options which match
-# this pattern).
-#
-# There are only two supported options: --lt-debug and
-# --lt-dump-script. There is, deliberately, no --lt-help.
-#
-# The first argument to this parsing function should be the
-# script's $0 value, followed by "$@".
-lt_option_debug=
-func_parse_lt_options ()
-{
-  lt_script_arg0=\$0
-  shift
-  for lt_opt
-  do
-    case \"\$lt_opt\" in
-    --lt-debug) lt_option_debug=1 ;;
-    --lt-dump-script)
-        lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\`
-        test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=.
-        lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\`
-        cat \"\$lt_dump_D/\$lt_dump_F\"
-        exit 0
-      ;;
-    --lt-*)
-        \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2
-        exit 1
-      ;;
-    esac
-  done
-
-  # Print the debug banner immediately:
-  if test -n \"\$lt_option_debug\"; then
-    echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2
-  fi
-}
-
-# Used when --lt-debug. Prints its arguments to stdout
-# (redirection is the responsibility of the caller)
-func_lt_dump_args ()
-{
-  lt_dump_args_N=1;
-  for lt_arg
-  do
-    \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\"
-    lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
-  done
-}
-
-# Core function for launching the target application
-func_exec_program_core ()
-{
-"
-  case $host in
-  # Backslashes separate directories on plain windows
-  *-*-mingw | *-*-os2* | *-cegcc*)
-    $ECHO "\
-      if test -n \"\$lt_option_debug\"; then
-        \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2
-        func_lt_dump_args \${1+\"\$@\"} 1>&2
-      fi
-      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
-"
-    ;;
-
-  *)
-    $ECHO "\
-      if test -n \"\$lt_option_debug\"; then
-        \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2
-        func_lt_dump_args \${1+\"\$@\"} 1>&2
-      fi
-      exec \"\$progdir/\$program\" \${1+\"\$@\"}
-"
-    ;;
-  esac
-  $ECHO "\
-      \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
-      exit 1
-}
-
-# A function to encapsulate launching the target application
-# Strips options in the --lt-* namespace from \$@ and
-# launches target application with the remaining arguments.
-func_exec_program ()
-{
-  case \" \$* \" in
-  *\\ --lt-*)
-    for lt_wr_arg
-    do
-      case \$lt_wr_arg in
-      --lt-*) ;;
-      *) set x \"\$@\" \"\$lt_wr_arg\"; shift;;
-      esac
+    ECHO=\"$qecho\"
+    file=\"\$0\"
+    # Make sure echo works.
+    if test \"X\$1\" = X--no-reexec; then
+      # Discard the --no-reexec flag, and continue.
       shift
-    done ;;
-  esac
-  func_exec_program_core \${1+\"\$@\"}
-}
-
-  # Parse options
-  func_parse_lt_options \"\$0\" \${1+\"\$@\"}
+    elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then
+      # Yippee, \$ECHO works!
+      :
+    else
+      # Restart under the correct shell, and then maybe \$ECHO will work.
+      exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
+    fi
+  fi\
+"
+        $ECHO "\
 
   # Find the directory that this script lives in.
-  thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\`
+  thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
   test \"x\$thisdir\" = \"x\$file\" && thisdir=.
 
   # Follow symbolic links until we get to the real thisdir.
-  file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\`
+  file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
   while test -n \"\$file\"; do
-    destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\`
+    destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
 
     # If there was a directory component, then change thisdir.
     if test \"x\$destdir\" != \"x\$file\"; then
@@ -4019,13 +2783,30 @@ func_exec_program ()
       esac
     fi
 
-    file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\`
-    file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\`
+    file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
+    file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
   done
+"
+}
+# end: func_emit_wrapper_part1
+
+# func_emit_wrapper_part2 [arg=no]
+#
+# Emit the second part of a libtool wrapper script on stdout.
+# For more information, see the description associated with
+# func_emit_wrapper(), below.
+func_emit_wrapper_part2 ()
+{
+        func_emit_wrapper_part2_arg1=no
+        if test -n "$1" ; then
+          func_emit_wrapper_part2_arg1=$1
+        fi
+
+        $ECHO "\
 
   # Usually 'no', except on cygwin/mingw when embedded into
   # the cwrapper.
-  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1
+  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_part2_arg1
   if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
     # special case for '.'
     if test \"\$thisdir\" = \".\"; then
@@ -4033,7 +2814,7 @@ func_exec_program ()
     fi
     # remove .libs from thisdir
     case \"\$thisdir\" in
-    *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;;
+    *[\\\\/]$objdir ) thisdir=\`\$ECHO \"X\$thisdir\" | \$Xsed -e 's%[\\\\/][^\\\\/]*$%%'\` ;;
     $objdir )   thisdir=. ;;
     esac
   fi
@@ -4088,18 +2869,6 @@ func_exec_program ()
 
   if test -f \"\$progdir/\$program\"; then"
 
-        # fixup the dll searchpath if we need to.
-        #
-        # Fix the DLL searchpath if we need to.  Do this before prepending
-        # to shlibpath, because on Windows, both are PATH and uninstalled
-        # libraries must come first.
-        if test -n "$dllsearchpath"; then
-          $ECHO "\
-    # Add the dll search path components to the executable PATH
-    PATH=$dllsearchpath:\$PATH
-"
-        fi
-
         # Export our shlibpath_var if we have one.
         if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
           $ECHO "\
@@ -4108,29 +2877,254 @@ func_exec_program ()
 
     # Some systems cannot cope with colon-terminated $shlibpath_var
     # The second colon is a workaround for a bug in BeOS R4 sed
-    $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\`
+    $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
 
     export $shlibpath_var
 "
         fi
 
+        # fixup the dll searchpath if we need to.
+        if test -n "$dllsearchpath"; then
+          $ECHO "\
+    # Add the dll search path components to the executable PATH
+    PATH=$dllsearchpath:\$PATH
+"
+        fi
+
         $ECHO "\
     if test \"\$libtool_execute_magic\" != \"$magic\"; then
       # Run the actual program with our arguments.
-      func_exec_program \${1+\"\$@\"}
+"
+        case $host in
+        # Backslashes separate directories on plain windows
+        *-*-mingw | *-*-os2* | *-cegcc*)
+          $ECHO "\
+      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
+"
+          ;;
+
+        *)
+          $ECHO "\
+      exec \"\$progdir/\$program\" \${1+\"\$@\"}
+"
+          ;;
+        esac
+        $ECHO "\
+      \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
+      exit 1
     fi
   else
     # The program doesn't exist.
     \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
     \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
-    \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
+    $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
     exit 1
   fi
 fi\
 "
 }
+# end: func_emit_wrapper_part2
+
+
+# func_emit_wrapper [arg=no]
+#
+# Emit a libtool wrapper script on stdout.
+# Don't directly open a file because we may want to
+# incorporate the script contents within a cygwin/mingw
+# wrapper executable.  Must ONLY be called from within
+# func_mode_link because it depends on a number of variables
+# set therein.
+#
+# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
+# variable will take.  If 'yes', then the emitted script
+# will assume that the directory in which it is stored is
+# the $objdir directory.  This is a cygwin/mingw-specific
+# behavior.
+func_emit_wrapper ()
+{
+        func_emit_wrapper_arg1=no
+        if test -n "$1" ; then
+          func_emit_wrapper_arg1=$1
+        fi
+
+        # split this up so that func_emit_cwrapperexe_src
+        # can call each part independently.
+        func_emit_wrapper_part1 "${func_emit_wrapper_arg1}"
+        func_emit_wrapper_part2 "${func_emit_wrapper_arg1}"
+}
 
 
+# func_to_host_path arg
+#
+# Convert paths to host format when used with build tools.
+# Intended for use with "native" mingw (where libtool itself
+# is running under the msys shell), or in the following cross-
+# build environments:
+#    $build          $host
+#    mingw (msys)    mingw  [e.g. native]
+#    cygwin          mingw
+#    *nix + wine     mingw
+# where wine is equipped with the `winepath' executable.
+# In the native mingw case, the (msys) shell automatically
+# converts paths for any non-msys applications it launches,
+# but that facility isn't available from inside the cwrapper.
+# Similar accommodations are necessary for $host mingw and
+# $build cygwin.  Calling this function does no harm for other
+# $host/$build combinations not listed above.
+#
+# ARG is the path (on $build) that should be converted to
+# the proper representation for $host. The result is stored
+# in $func_to_host_path_result.
+func_to_host_path ()
+{
+  func_to_host_path_result="$1"
+  if test -n "$1" ; then
+    case $host in
+      *mingw* )
+        lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+        case $build in
+          *mingw* ) # actually, msys
+            # awkward: cmd appends spaces to result
+            lt_sed_strip_trailing_spaces="s/[ ]*\$//"
+            func_to_host_path_tmp1=`( cmd //c echo "$1" |\
+              $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
+            func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
+              $SED -e "$lt_sed_naive_backslashify"`
+            ;;
+          *cygwin* )
+            func_to_host_path_tmp1=`cygpath -w "$1"`
+            func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
+              $SED -e "$lt_sed_naive_backslashify"`
+            ;;
+          * )
+            # Unfortunately, winepath does not exit with a non-zero
+            # error code, so we are forced to check the contents of
+            # stdout. On the other hand, if the command is not
+            # found, the shell will set an exit code of 127 and print
+            # *an error message* to stdout. So we must check for both
+            # error code of zero AND non-empty stdout, which explains
+            # the odd construction:
+            func_to_host_path_tmp1=`winepath -w "$1" 2>/dev/null`
+            if test "$?" -eq 0 && test -n "${func_to_host_path_tmp1}"; then
+              func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
+                $SED -e "$lt_sed_naive_backslashify"`
+            else
+              # Allow warning below.
+              func_to_host_path_result=""
+            fi
+            ;;
+        esac
+        if test -z "$func_to_host_path_result" ; then
+          func_error "Could not determine host path corresponding to"
+          func_error "  '$1'"
+          func_error "Continuing, but uninstalled executables may not work."
+          # Fallback:
+          func_to_host_path_result="$1"
+        fi
+        ;;
+    esac
+  fi
+}
+# end: func_to_host_path
+
+# func_to_host_pathlist arg
+#
+# Convert pathlists to host format when used with build tools.
+# See func_to_host_path(), above. This function supports the
+# following $build/$host combinations (but does no harm for
+# combinations not listed here):
+#    $build          $host
+#    mingw (msys)    mingw  [e.g. native]
+#    cygwin          mingw
+#    *nix + wine     mingw
+#
+# Path separators are also converted from $build format to
+# $host format. If ARG begins or ends with a path separator
+# character, it is preserved (but converted to $host format)
+# on output.
+#
+# ARG is a pathlist (on $build) that should be converted to
+# the proper representation on $host. The result is stored
+# in $func_to_host_pathlist_result.
+func_to_host_pathlist ()
+{
+  func_to_host_pathlist_result="$1"
+  if test -n "$1" ; then
+    case $host in
+      *mingw* )
+        lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+        # Remove leading and trailing path separator characters from
+        # ARG. msys behavior is inconsistent here, cygpath turns them
+        # into '.;' and ';.', and winepath ignores them completely.
+        func_to_host_pathlist_tmp2="$1"
+        # Once set for this call, this variable should not be
+        # reassigned. It is used in tha fallback case.
+        func_to_host_pathlist_tmp1=`echo "$func_to_host_pathlist_tmp2" |\
+          $SED -e 's|^:*||' -e 's|:*$||'`
+        case $build in
+          *mingw* ) # Actually, msys.
+            # Awkward: cmd appends spaces to result.
+            lt_sed_strip_trailing_spaces="s/[ ]*\$//"
+            func_to_host_pathlist_tmp2=`( cmd //c echo "$func_to_host_pathlist_tmp1" |\
+              $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
+            func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
+              $SED -e "$lt_sed_naive_backslashify"`
+            ;;
+          *cygwin* )
+            func_to_host_pathlist_tmp2=`cygpath -w -p "$func_to_host_pathlist_tmp1"`
+            func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
+              $SED -e "$lt_sed_naive_backslashify"`
+            ;;
+          * )
+            # unfortunately, winepath doesn't convert pathlists
+            func_to_host_pathlist_result=""
+            func_to_host_pathlist_oldIFS=$IFS
+            IFS=:
+            for func_to_host_pathlist_f in $func_to_host_pathlist_tmp1 ; do
+              IFS=$func_to_host_pathlist_oldIFS
+              if test -n "$func_to_host_pathlist_f" ; then
+                func_to_host_path "$func_to_host_pathlist_f"
+                if test -n "$func_to_host_path_result" ; then
+                  if test -z "$func_to_host_pathlist_result" ; then
+                    func_to_host_pathlist_result="$func_to_host_path_result"
+                  else
+                    func_to_host_pathlist_result="$func_to_host_pathlist_result;$func_to_host_path_result"
+                  fi
+                fi
+              fi
+              IFS=:
+            done
+            IFS=$func_to_host_pathlist_oldIFS
+            ;;
+        esac
+        if test -z "$func_to_host_pathlist_result" ; then
+          func_error "Could not determine the host path(s) corresponding to"
+          func_error "  '$1'"
+          func_error "Continuing, but uninstalled executables may not work."
+          # Fallback. This may break if $1 contains DOS-style drive
+          # specifications. The fix is not to complicate the expression
+          # below, but for the user to provide a working wine installation
+          # with winepath so that path translation in the cross-to-mingw
+          # case works properly.
+          lt_replace_pathsep_nix_to_dos="s|:|;|g"
+          func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp1" |\
+            $SED -e "$lt_replace_pathsep_nix_to_dos"`
+        fi
+        # Now, add the leading and trailing path separators back
+        case "$1" in
+          :* ) func_to_host_pathlist_result=";$func_to_host_pathlist_result"
+            ;;
+        esac
+        case "$1" in
+          *: ) func_to_host_pathlist_result="$func_to_host_pathlist_result;"
+            ;;
+        esac
+        ;;
+    esac
+  fi
+}
+# end: func_to_host_pathlist
+
 # func_emit_cwrapperexe_src
 # emit the source code for a wrapper executable on stdout
 # Must ONLY be called from within func_mode_link because
@@ -4147,23 +3141,31 @@ func_emit_cwrapperexe_src ()
 
    This wrapper executable should never be moved out of the build directory.
    If it is, it will not operate correctly.
+
+   Currently, it simply execs the wrapper *script* "$SHELL $output",
+   but could eventually absorb all of the scripts functionality and
+   exec $objdir/$outputname directly.
 */
 EOF
             cat <<"EOF"
-#ifdef _MSC_VER
-# define _CRT_SECURE_NO_DEPRECATE 1
-#endif
 #include <stdio.h>
 #include <stdlib.h>
 #ifdef _MSC_VER
 # include <direct.h>
 # include <process.h>
 # include <io.h>
+# define setmode _setmode
 #else
 # include <unistd.h>
 # include <stdint.h>
 # ifdef __CYGWIN__
 #  include <io.h>
+#  define HAVE_SETENV
+#  ifdef __STRICT_ANSI__
+char *realpath (const char *, char *);
+int putenv (char *);
+int setenv (const char *, const char *, int);
+#  endif
 # endif
 #endif
 #include <malloc.h>
@@ -4175,44 +3177,6 @@ EOF
 #include <fcntl.h>
 #include <sys/stat.h>
 
-/* declarations of non-ANSI functions */
-#if defined(__MINGW32__)
-# ifdef __STRICT_ANSI__
-int _putenv (const char *);
-# endif
-#elif defined(__CYGWIN__)
-# ifdef __STRICT_ANSI__
-char *realpath (const char *, char *);
-int putenv (char *);
-int setenv (const char *, const char *, int);
-# endif
-/* #elif defined (other platforms) ... */
-#endif
-
-/* portability defines, excluding path handling macros */
-#if defined(_MSC_VER)
-# define setmode _setmode
-# define stat    _stat
-# define chmod   _chmod
-# define getcwd  _getcwd
-# define putenv  _putenv
-# define S_IXUSR _S_IEXEC
-# ifndef _INTPTR_T_DEFINED
-#  define _INTPTR_T_DEFINED
-#  define intptr_t int
-# endif
-#elif defined(__MINGW32__)
-# define setmode _setmode
-# define stat    _stat
-# define chmod   _chmod
-# define getcwd  _getcwd
-# define putenv  _putenv
-#elif defined(__CYGWIN__)
-# define HAVE_SETENV
-# define FOPEN_WB "wb"
-/* #elif defined (other platforms) ... */
-#endif
-
 #if defined(PATH_MAX)
 # define LT_PATHMAX PATH_MAX
 #elif defined(MAXPATHLEN)
@@ -4228,7 +3192,14 @@ int setenv (const char *, const char *, int);
 # define S_IXGRP 0
 #endif
 
-/* path handling portability macros */
+#ifdef _MSC_VER
+# define S_IXUSR _S_IEXEC
+# define stat _stat
+# ifndef _INTPTR_T_DEFINED
+#  define intptr_t int
+# endif
+#endif
+
 #ifndef DIR_SEPARATOR
 # define DIR_SEPARATOR '/'
 # define PATH_SEPARATOR ':'
@@ -4259,6 +3230,10 @@ int setenv (const char *, const char *, int);
 # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
 #endif /* PATH_SEPARATOR_2 */
 
+#ifdef __CYGWIN__
+# define FOPEN_WB "wb"
+#endif
+
 #ifndef FOPEN_WB
 # define FOPEN_WB "w"
 #endif
@@ -4271,13 +3246,22 @@ int setenv (const char *, const char *, int);
   if (stale) { free ((void *) stale); stale = 0; } \
 } while (0)
 
-#if defined(LT_DEBUGWRAPPER)
-static int lt_debug = 1;
+#undef LTWRAPPER_DEBUGPRINTF
+#if defined DEBUGWRAPPER
+# define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args
+static void
+ltwrapper_debugprintf (const char *fmt, ...)
+{
+    va_list args;
+    va_start (args, fmt);
+    (void) vfprintf (stderr, fmt, args);
+    va_end (args);
+}
 #else
-static int lt_debug = 0;
+# define LTWRAPPER_DEBUGPRINTF(args)
 #endif
 
-const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */
+const char *program_name = NULL;
 
 void *xmalloc (size_t num);
 char *xstrdup (const char *string);
@@ -4287,27 +3271,41 @@ char *chase_symlinks (const char *pathspec);
 int make_executable (const char *path);
 int check_executable (const char *path);
 char *strendzap (char *str, const char *pat);
-void lt_debugprintf (const char *file, int line, const char *fmt, ...);
-void lt_fatal (const char *file, int line, const char *message, ...);
-static const char *nonnull (const char *s);
-static const char *nonempty (const char *s);
+void lt_fatal (const char *message, ...);
 void lt_setenv (const char *name, const char *value);
 char *lt_extend_str (const char *orig_value, const char *add, int to_end);
+void lt_opt_process_env_set (const char *arg);
+void lt_opt_process_env_prepend (const char *arg);
+void lt_opt_process_env_append (const char *arg);
+int lt_split_name_value (const char *arg, char** name, char** value);
 void lt_update_exe_path (const char *name, const char *value);
 void lt_update_lib_path (const char *name, const char *value);
-char **prepare_spawn (char **argv);
-void lt_dump_script (FILE *f);
+
+static const char *script_text_part1 =
 EOF
 
+            func_emit_wrapper_part1 yes |
+                $SED -e 's/\([\\"]\)/\\\1/g' \
+                     -e 's/^/  "/' -e 's/$/\\n"/'
+            echo ";"
             cat <<EOF
-volatile const char * MAGIC_EXE = "$magic_exe";
+
+static const char *script_text_part2 =
+EOF
+            func_emit_wrapper_part2 yes |
+                $SED -e 's/\([\\"]\)/\\\1/g' \
+                     -e 's/^/  "/' -e 's/$/\\n"/'
+            echo ";"
+
+            cat <<EOF
+const char * MAGIC_EXE = "$magic_exe";
 const char * LIB_PATH_VARNAME = "$shlibpath_var";
 EOF
 
             if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
-              func_to_host_path "$temp_rpath"
+              func_to_host_pathlist "$temp_rpath"
               cat <<EOF
-const char * LIB_PATH_VALUE   = "$func_to_host_path_result";
+const char * LIB_PATH_VALUE   = "$func_to_host_pathlist_result";
 EOF
             else
               cat <<"EOF"
@@ -4316,10 +3314,10 @@ EOF
             fi
 
             if test -n "$dllsearchpath"; then
-              func_to_host_path "$dllsearchpath:"
+              func_to_host_pathlist "$dllsearchpath:"
               cat <<EOF
 const char * EXE_PATH_VARNAME = "PATH";
-const char * EXE_PATH_VALUE   = "$func_to_host_path_result";
+const char * EXE_PATH_VALUE   = "$func_to_host_pathlist_result";
 EOF
             else
               cat <<"EOF"
@@ -4342,10 +3340,24 @@ EOF
             cat <<"EOF"
 
 #define LTWRAPPER_OPTION_PREFIX         "--lt-"
+#define LTWRAPPER_OPTION_PREFIX_LENGTH  5
 
+static const size_t opt_prefix_len         = LTWRAPPER_OPTION_PREFIX_LENGTH;
 static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
+
 static const char *dumpscript_opt       = LTWRAPPER_OPTION_PREFIX "dump-script";
-static const char *debug_opt            = LTWRAPPER_OPTION_PREFIX "debug";
+
+static const size_t env_set_opt_len     = LTWRAPPER_OPTION_PREFIX_LENGTH + 7;
+static const char *env_set_opt          = LTWRAPPER_OPTION_PREFIX "env-set";
+  /* argument is putenv-style "foo=bar", value of foo is set to bar */
+
+static const size_t env_prepend_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 11;
+static const char *env_prepend_opt      = LTWRAPPER_OPTION_PREFIX "env-prepend";
+  /* argument is putenv-style "foo=bar", new value of foo is bar${foo} */
+
+static const size_t env_append_opt_len  = LTWRAPPER_OPTION_PREFIX_LENGTH + 10;
+static const char *env_append_opt       = LTWRAPPER_OPTION_PREFIX "env-append";
+  /* argument is putenv-style "foo=bar", new value of foo is ${foo}bar */
 
 int
 main (int argc, char *argv[])
@@ -4362,13 +3374,10 @@ main (int argc, char *argv[])
   int i;
 
   program_name = (char *) xstrdup (base_name (argv[0]));
-  newargz = XMALLOC (char *, argc + 1);
+  LTWRAPPER_DEBUGPRINTF (("(main) argv[0]      : %s\n", argv[0]));
+  LTWRAPPER_DEBUGPRINTF (("(main) program_name : %s\n", program_name));
 
-  /* very simple arg parsing; don't want to rely on getopt
-   * also, copy all non cwrapper options to newargz, except
-   * argz[0], which is handled differently
-   */
-  newargc=0;
+  /* very simple arg parsing; don't want to rely on getopt */
   for (i = 1; i < argc; i++)
     {
       if (strcmp (argv[i], dumpscript_opt) == 0)
@@ -4382,57 +3391,25 @@ EOF
               esac
 
             cat <<"EOF"
-          lt_dump_script (stdout);
+          printf ("%s", script_text_part1);
+          printf ("%s", script_text_part2);
           return 0;
         }
-      if (strcmp (argv[i], debug_opt) == 0)
-        {
-          lt_debug = 1;
-          continue;
-        }
-      if (strcmp (argv[i], ltwrapper_option_prefix) == 0)
-        {
-          /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
-             namespace, but it is not one of the ones we know about and
-             have already dealt with, above (inluding dump-script), then
-             report an error. Otherwise, targets might begin to believe
-             they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
-             namespace. The first time any user complains about this, we'll
-             need to make LTWRAPPER_OPTION_PREFIX a configure-time option
-             or a configure.ac-settable value.
-           */
-          lt_fatal (__FILE__, __LINE__,
-                    "unrecognized %s option: '%s'",
-                    ltwrapper_option_prefix, argv[i]);
-        }
-      /* otherwise ... */
-      newargz[++newargc] = xstrdup (argv[i]);
     }
-  newargz[++newargc] = NULL;
-
-EOF
-            cat <<EOF
-  /* The GNU banner must be the first non-error debug message */
-  lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\n");
-EOF
-            cat <<"EOF"
-  lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]);
-  lt_debugprintf (__FILE__, __LINE__, "(main) program_name: %s\n", program_name);
 
+  newargz = XMALLOC (char *, argc + 1);
   tmp_pathspec = find_executable (argv[0]);
   if (tmp_pathspec == NULL)
-    lt_fatal (__FILE__, __LINE__, "couldn't find %s", argv[0]);
-  lt_debugprintf (__FILE__, __LINE__,
-                  "(main) found exe (before symlink chase) at: %s\n",
-                  tmp_pathspec);
+    lt_fatal ("Couldn't find %s", argv[0]);
+  LTWRAPPER_DEBUGPRINTF (("(main) found exe (before symlink chase) at : %s\n",
+                          tmp_pathspec));
 
   actual_cwrapper_path = chase_symlinks (tmp_pathspec);
-  lt_debugprintf (__FILE__, __LINE__,
-                  "(main) found exe (after symlink chase) at: %s\n",
-                  actual_cwrapper_path);
+  LTWRAPPER_DEBUGPRINTF (("(main) found exe (after symlink chase) at : %s\n",
+                          actual_cwrapper_path));
   XFREE (tmp_pathspec);
 
-  actual_cwrapper_name = xstrdup (base_name (actual_cwrapper_path));
+  actual_cwrapper_name = xstrdup( base_name (actual_cwrapper_path));
   strendzap (actual_cwrapper_path, actual_cwrapper_name);
 
   /* wrapper name transforms */
@@ -4450,9 +3427,8 @@ EOF
   target_name = tmp_pathspec;
   tmp_pathspec = 0;
 
-  lt_debugprintf (__FILE__, __LINE__,
-                  "(main) libtool target name: %s\n",
-                  target_name);
+  LTWRAPPER_DEBUGPRINTF (("(main) libtool target name: %s\n",
+                          target_name));
 EOF
 
             cat <<EOF
@@ -4502,19 +3478,80 @@ EOF
 
   lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
   lt_setenv ("DUALCASE", "1");  /* for MSK sh */
-  /* Update the DLL searchpath.  EXE_PATH_VALUE ($dllsearchpath) must
-     be prepended before (that is, appear after) LIB_PATH_VALUE ($temp_rpath)
-     because on Windows, both *_VARNAMEs are PATH but uninstalled
-     libraries must come first. */
-  lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
   lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
+  lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
+
+  newargc=0;
+  for (i = 1; i < argc; i++)
+    {
+      if (strncmp (argv[i], env_set_opt, env_set_opt_len) == 0)
+        {
+          if (argv[i][env_set_opt_len] == '=')
+            {
+              const char *p = argv[i] + env_set_opt_len + 1;
+              lt_opt_process_env_set (p);
+            }
+          else if (argv[i][env_set_opt_len] == '\0' && i + 1 < argc)
+            {
+              lt_opt_process_env_set (argv[++i]); /* don't copy */
+            }
+          else
+            lt_fatal ("%s missing required argument", env_set_opt);
+          continue;
+        }
+      if (strncmp (argv[i], env_prepend_opt, env_prepend_opt_len) == 0)
+        {
+          if (argv[i][env_prepend_opt_len] == '=')
+            {
+              const char *p = argv[i] + env_prepend_opt_len + 1;
+              lt_opt_process_env_prepend (p);
+            }
+          else if (argv[i][env_prepend_opt_len] == '\0' && i + 1 < argc)
+            {
+              lt_opt_process_env_prepend (argv[++i]); /* don't copy */
+            }
+          else
+            lt_fatal ("%s missing required argument", env_prepend_opt);
+          continue;
+        }
+      if (strncmp (argv[i], env_append_opt, env_append_opt_len) == 0)
+        {
+          if (argv[i][env_append_opt_len] == '=')
+            {
+              const char *p = argv[i] + env_append_opt_len + 1;
+              lt_opt_process_env_append (p);
+            }
+          else if (argv[i][env_append_opt_len] == '\0' && i + 1 < argc)
+            {
+              lt_opt_process_env_append (argv[++i]); /* don't copy */
+            }
+          else
+            lt_fatal ("%s missing required argument", env_append_opt);
+          continue;
+        }
+      if (strncmp (argv[i], ltwrapper_option_prefix, opt_prefix_len) == 0)
+        {
+          /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
+             namespace, but it is not one of the ones we know about and
+             have already dealt with, above (inluding dump-script), then
+             report an error. Otherwise, targets might begin to believe
+             they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
+             namespace. The first time any user complains about this, we'll
+             need to make LTWRAPPER_OPTION_PREFIX a configure-time option
+             or a configure.ac-settable value.
+           */
+          lt_fatal ("Unrecognized option in %s namespace: '%s'",
+                    ltwrapper_option_prefix, argv[i]);
+        }
+      /* otherwise ... */
+      newargz[++newargc] = xstrdup (argv[i]);
+    }
+  newargz[++newargc] = NULL;
 
-  lt_debugprintf (__FILE__, __LINE__, "(main) lt_argv_zero: %s\n",
-                  nonnull (lt_argv_zero));
+  LTWRAPPER_DEBUGPRINTF     (("(main) lt_argv_zero : %s\n", (lt_argv_zero ? lt_argv_zero : "<NULL>")));
   for (i = 0; i < newargc; i++)
     {
-      lt_debugprintf (__FILE__, __LINE__, "(main) newargz[%d]: %s\n",
-                      i, nonnull (newargz[i]));
+      LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d]   : %s\n", i, (newargz[i] ? newargz[i] : "<NULL>")));
     }
 
 EOF
@@ -4523,14 +3560,11 @@ EOF
               mingw*)
                 cat <<"EOF"
   /* execv doesn't actually work on mingw as expected on unix */
-  newargz = prepare_spawn (newargz);
   rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
   if (rval == -1)
     {
       /* failed to start process */
-      lt_debugprintf (__FILE__, __LINE__,
-                      "(main) failed to launch target \"%s\": %s\n",
-                      lt_argv_zero, nonnull (strerror (errno)));
+      LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"%s\": errno = %d\n", lt_argv_zero, errno));
       return 127;
     }
   return rval;
@@ -4552,7 +3586,7 @@ xmalloc (size_t num)
 {
   void *p = (void *) malloc (num);
   if (!p)
-    lt_fatal (__FILE__, __LINE__, "memory exhausted");
+    lt_fatal ("Memory exhausted");
 
   return p;
 }
@@ -4586,8 +3620,8 @@ check_executable (const char *path)
 {
   struct stat st;
 
-  lt_debugprintf (__FILE__, __LINE__, "(check_executable): %s\n",
-                  nonempty (path));
+  LTWRAPPER_DEBUGPRINTF (("(check_executable)  : %s\n",
+                          path ? (*path ? path : "EMPTY!") : "NULL!"));
   if ((!path) || (!*path))
     return 0;
 
@@ -4604,8 +3638,8 @@ make_executable (const char *path)
   int rval = 0;
   struct stat st;
 
-  lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n",
-                  nonempty (path));
+  LTWRAPPER_DEBUGPRINTF (("(make_executable)   : %s\n",
+                          path ? (*path ? path : "EMPTY!") : "NULL!"));
   if ((!path) || (!*path))
     return 0;
 
@@ -4631,8 +3665,8 @@ find_executable (const char *wrapper)
   int tmp_len;
   char *concat_name;
 
-  lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n",
-                  nonempty (wrapper));
+  LTWRAPPER_DEBUGPRINTF (("(find_executable)   : %s\n",
+                          wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!"));
 
   if ((wrapper == NULL) || (*wrapper == '\0'))
     return NULL;
@@ -4685,8 +3719,7 @@ find_executable (const char *wrapper)
                 {
                   /* empty path: current directory */
                   if (getcwd (tmp, LT_PATHMAX) == NULL)
-                    lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
-                              nonnull (strerror (errno)));
+                    lt_fatal ("getcwd failed");
                   tmp_len = strlen (tmp);
                   concat_name =
                     XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
@@ -4711,8 +3744,7 @@ find_executable (const char *wrapper)
     }
   /* Relative path | not found in path: prepend cwd */
   if (getcwd (tmp, LT_PATHMAX) == NULL)
-    lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
-              nonnull (strerror (errno)));
+    lt_fatal ("getcwd failed");
   tmp_len = strlen (tmp);
   concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
   memcpy (concat_name, tmp, tmp_len);
@@ -4738,9 +3770,8 @@ chase_symlinks (const char *pathspec)
   int has_symlinks = 0;
   while (strlen (tmp_pathspec) && !has_symlinks)
     {
-      lt_debugprintf (__FILE__, __LINE__,
-                      "checking path component for symlinks: %s\n",
-                      tmp_pathspec);
+      LTWRAPPER_DEBUGPRINTF (("checking path component for symlinks: %s\n",
+                              tmp_pathspec));
       if (lstat (tmp_pathspec, &s) == 0)
         {
           if (S_ISLNK (s.st_mode) != 0)
@@ -4762,9 +3793,8 @@ chase_symlinks (const char *pathspec)
         }
       else
         {
-          lt_fatal (__FILE__, __LINE__,
-                    "error accessing file \"%s\": %s",
-                    tmp_pathspec, nonnull (strerror (errno)));
+          char *errstr = strerror (errno);
+          lt_fatal ("Error accessing file %s (%s)", tmp_pathspec, errstr);
         }
     }
   XFREE (tmp_pathspec);
@@ -4777,8 +3807,7 @@ chase_symlinks (const char *pathspec)
   tmp_pathspec = realpath (pathspec, buf);
   if (tmp_pathspec == 0)
     {
-      lt_fatal (__FILE__, __LINE__,
-                "could not follow symlinks for %s", pathspec);
+      lt_fatal ("Could not follow symlinks for %s", pathspec);
     }
   return xstrdup (tmp_pathspec);
 #endif
@@ -4804,25 +3833,11 @@ strendzap (char *str, const char *pat)
   return str;
 }
 
-void
-lt_debugprintf (const char *file, int line, const char *fmt, ...)
-{
-  va_list args;
-  if (lt_debug)
-    {
-      (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line);
-      va_start (args, fmt);
-      (void) vfprintf (stderr, fmt, args);
-      va_end (args);
-    }
-}
-
 static void
-lt_error_core (int exit_status, const char *file,
-               int line, const char *mode,
+lt_error_core (int exit_status, const char *mode,
                const char *message, va_list ap)
 {
-  fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode);
+  fprintf (stderr, "%s: %s: ", program_name, mode);
   vfprintf (stderr, message, ap);
   fprintf (stderr, ".\n");
 
@@ -4831,32 +3846,20 @@ lt_error_core (int exit_status, const char *file,
 }
 
 void
-lt_fatal (const char *file, int line, const char *message, ...)
+lt_fatal (const char *message, ...)
 {
   va_list ap;
   va_start (ap, message);
-  lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap);
+  lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
   va_end (ap);
 }
 
-static const char *
-nonnull (const char *s)
-{
-  return s ? s : "(null)";
-}
-
-static const char *
-nonempty (const char *s)
-{
-  return (s && !*s) ? "(empty)" : nonnull (s);
-}
-
 void
 lt_setenv (const char *name, const char *value)
 {
-  lt_debugprintf (__FILE__, __LINE__,
-                  "(lt_setenv) setting '%s' to '%s'\n",
-                  nonnull (name), nonnull (value));
+  LTWRAPPER_DEBUGPRINTF (("(lt_setenv) setting '%s' to '%s'\n",
+                          (name ? name : "<NULL>"),
+                          (value ? value : "<NULL>")));
   {
 #ifdef HAVE_SETENV
     /* always make a copy, for consistency with !HAVE_SETENV */
@@ -4901,12 +3904,95 @@ lt_extend_str (const char *orig_value, const char *add, int to_end)
   return new_value;
 }
 
+int
+lt_split_name_value (const char *arg, char** name, char** value)
+{
+  const char *p;
+  int len;
+  if (!arg || !*arg)
+    return 1;
+
+  p = strchr (arg, (int)'=');
+
+  if (!p)
+    return 1;
+
+  *value = xstrdup (++p);
+
+  len = strlen (arg) - strlen (*value);
+  *name = XMALLOC (char, len);
+  strncpy (*name, arg, len-1);
+  (*name)[len - 1] = '\0';
+
+  return 0;
+}
+
+void
+lt_opt_process_env_set (const char *arg)
+{
+  char *name = NULL;
+  char *value = NULL;
+
+  if (lt_split_name_value (arg, &name, &value) != 0)
+    {
+      XFREE (name);
+      XFREE (value);
+      lt_fatal ("bad argument for %s: '%s'", env_set_opt, arg);
+    }
+
+  lt_setenv (name, value);
+  XFREE (name);
+  XFREE (value);
+}
+
+void
+lt_opt_process_env_prepend (const char *arg)
+{
+  char *name = NULL;
+  char *value = NULL;
+  char *new_value = NULL;
+
+  if (lt_split_name_value (arg, &name, &value) != 0)
+    {
+      XFREE (name);
+      XFREE (value);
+      lt_fatal ("bad argument for %s: '%s'", env_prepend_opt, arg);
+    }
+
+  new_value = lt_extend_str (getenv (name), value, 0);
+  lt_setenv (name, new_value);
+  XFREE (new_value);
+  XFREE (name);
+  XFREE (value);
+}
+
+void
+lt_opt_process_env_append (const char *arg)
+{
+  char *name = NULL;
+  char *value = NULL;
+  char *new_value = NULL;
+
+  if (lt_split_name_value (arg, &name, &value) != 0)
+    {
+      XFREE (name);
+      XFREE (value);
+      lt_fatal ("bad argument for %s: '%s'", env_append_opt, arg);
+    }
+
+  new_value = lt_extend_str (getenv (name), value, 1);
+  lt_setenv (name, new_value);
+  XFREE (new_value);
+  XFREE (name);
+  XFREE (value);
+}
+
 void
 lt_update_exe_path (const char *name, const char *value)
 {
-  lt_debugprintf (__FILE__, __LINE__,
-                  "(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
-                  nonnull (name), nonnull (value));
+  LTWRAPPER_DEBUGPRINTF (("(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
+                          (name ? name : "<NULL>"),
+                          (value ? value : "<NULL>")));
 
   if (name && *name && value && *value)
     {
@@ -4925,9 +4011,9 @@ lt_update_exe_path (const char *name, const char *value)
 void
 lt_update_lib_path (const char *name, const char *value)
 {
-  lt_debugprintf (__FILE__, __LINE__,
-                  "(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
-                  nonnull (name), nonnull (value));
+  LTWRAPPER_DEBUGPRINTF (("(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
+                          (name ? name : "<NULL>"),
+                          (value ? value : "<NULL>")));
 
   if (name && *name && value && *value)
     {
@@ -4937,158 +4023,11 @@ lt_update_lib_path (const char *name, const char *value)
     }